Advanced Search >

Tower of Terror Extension Walls

Tower of Terror Extension Walls

STL (3D Model)

These files require the DragonLock Tower of Terror set. This is a remix and expansion to the Tower of Terror. These files allow you to create a level without a floor to make a level double high. There are also pieces with stairs mounted to the walls, so you can have stairs go up through the level without a floor. There are 4 wall pieces in this set. The pieces with stairs require supports when printed

1 - TWS - Tower Wall with Stairs
2 - TWES - Tower Wall Extension with Stairs
3 - TWE - Tower Wall Extension
4 - TWEW - Tower Wall with Windows Extension

These files were designed to use 4-40 X 1/4" Binder Hear Machine Screws and magnets that are 3/16" dia. x 1/10" thick. For the magnets Google search for "magnet d3h1".

Tower of Terror Extension SampleTower of Terror Extension Sample

NOTE: The floors and ground level walls without stairs shown in the pictures are from the Tower of Terror set and NOT included in this package. 


I used the following settings on my supports.

  • Touching Build Plate
  • Support Overhand Angle 80
  • Support Pattern Sig Zag
  • Support Density 10
  • Support Line Distance Apart 4.0
  • Support Z Distance 0.1
  • Support Top Distance 0.1
  • Support X/Y Distance 1.0

I think one of the mist important is the Support Overhang Angle. This sets up my slicer so it only adds a support if the angle of the part is greater than 80 degrees. The Z distance and X/Y distance is how far the supports are from the model. I found that having the X distance at 0.1 the parts do not “attach” to the support, but it creates enough support top create the horizontal piece. The X/Z distance of 1 keep the supports away from the model.

Update 10/9/2018

I have updated the above pieces to use the DragonLock clips between the walls.

1 - TWESDL - Tower Wall Extension with Stairs REV 05 DragonLock
2 - TWEDL - Tower Wall Extension REV 05 DragonLock
3 - TWEWDL - Tower Wall with Windows Extension REV 05 DragonLock

Update 10/11/2018

Updated the two DragonLock Stair pieces with Wooden Stairs instead of stone.

1 - TWESWDL-Tower Wall Extension with Wooden Stairs REV 05 B DrgonLock
2 - TWSWDL-Tower Wall with Wooden Stairs REV 05 B DrgonLock

The Fine Print

This product was created under license. Dragonbite Community Creator, Dragonlock, and Dragonbite are trademarks of Fat Dragon Games in the U.S.A. and other countries.

This work contains material that is copyright Fat Dragon Games and/or other authors. Such material is used with permission under the Community Content Agreement for Dragonbite Community Creator.

All other original material in this work is copyright 2018 by Robert Schrempp and published under the Community Content Agreement for Dragonbite Community Creator.

 Customers Who Bought this Title also Purchased
Reviews (1)
Discussions (2)
Customer avatar
Bob S October 27, 2018 4:18 pm UTC
Sorry for the delay, I am not in this system often, just got your message. I am making a new zip REV 07, will upload it in just a few minutes. There are no changes to the files from REV 06 to REV 07. REV 06 zip had a couple corrupted files.

Here is the list of file included in the ZIP file.

Tower Level without floor 00.png
Tower of Terror Extension Walls.jpg
Tower Wall Extensions Read Me.pdf
Tower Wall Stairs Sample.png
Tower Wall Stairs Window Sample.png
TWEDL-Tower_Wall Extension REV 05 B DrgonLock.stl
TWESDL-Tower_Wall Extension with Stairs REV 05 B DrgonLock.stl
TWES-Tower Wall Extension with Stairs REV 04 Magnets.stl
TWESWDL-Tower_Wall Extension With Wooden Stairs REV 05 B DrgonLock.stl
TWE-Tower Wall Extension REV 04 Magnets.stl
TWEWDL-Tower_Wall Extension with Windows REV 05 B DrgonLock.stl
TWEW-Tower_Wall Extension with Windowsn REV 04 Magnets.stl
TWSAShort-Tower_Wall Stairs Adaptor REV 05 Shorter.stl...See more
Customer avatar
Richard S October 16, 2018 5:18 pm UTC
The "" is corrupt per Z-Zip and Winrar both. Can you please fix the file and upload it again?
- Rich
Customer avatar
Bob S October 27, 2018 4:21 pm UTC
New ZIP is uploading now.
Customer avatar
Richard S November 01, 2018 1:45 pm UTC
Thanks Bob!
Narrow Results
 Follow Your Favorites!
NotificationsSign in to get custom notifications of new products!

Product Information
Community Content
Original electronic
Scanned image
These products were created by scanning an original printed edition. Most older books are in scanned image format because original digital layout files never existed or were no longer available from the publisher.

For PDF download editions, each page has been run through Optical Character Recognition (OCR) software to attempt to decipher the printed text. The result of this OCR process is placed invisibly behind the picture of each scanned page, to allow for text searching. However, any text in a given book set on a graphical background or in handwritten fonts would most likely not be picked up by the OCR software, and is therefore not searchable. Also, a few larger books may be resampled to fit into the system, and may not have this searchable text background.

For printed books, we have performed high-resolution scans of an original hardcopy of the book. We essentially digitally re-master the book. Unfortunately, the resulting quality of these books is not as high. It's the problem of making a copy of a copy. The text is fine for reading, but illustration work starts to run dark, pixellating and/or losing shades of grey. Moiré patterns may develop in photos. We mark clearly which print titles come from scanned image books so that you can make an informed purchase decision about the quality of what you will receive.
Original electronic format
These ebooks were created from the original electronic layout files, and therefore are fully text searchable. Also, their file size tends to be smaller than scanned image books. Most newer books are in the original electronic format. Both download and print editions of such books should be high quality.
File Last Updated:
October 27, 2018
This title was added to our catalog on October 03, 2018.