Advanced Search

DRAGONLOCK Ultimate: GM Screen of DOOM

DRAGONLOCK Ultimate: GM Screen of DOOM

STL (3D Model)

DRAGONLOCK™ Ultimate is an interlocking terrain system that allows you to create fully modular, multi-level 28mm scale dungeon terrain for your RPG or wargame on your home 3D printer. Individual pieces links to neighboring pieces with our exclusive Dragonbite™ clips. Each set is delivered as a downloadable .stl file, and once you have the set, you can print as many pieces as you like and never run out or need to purchase more. 

All of the models shown were printed at 200 micron resolution, a common standard on most economical 3D printers. A nice starter printer that can print these files starts around $220 (see our F.A.Q. for more info on printers, printing costs, filaments, and more, over on the FDG website forums.) Note: the dice tower top piece requires a 130x130mm print area. 

This modular GM screen includes:

• Dice towers (can face front or back)

• Optional demon face dice chute opening.

• Adjustable width and height for screen.

• Initiative tracker clips

• Initiative tracker clips (extended for binder clips)

• 2" titling bin

• 4" tilting bin

• 2" shelf

• 4" shelf

• Pen/pencil storage

• Full color instructions.










Terms & Conditions for products by Fat Dragon Games can be viewed HERE. 

 Customers Who Bought this Title also Purchased
Reviews (2)
Discussions (7)
Customer avatar
Dan D May 12, 2020 3:57 pm UTC
I have printed out about 1 of everything. I have one issue and one suggestion.
Issue: When rolling a pool of 6-sides, the flat portion of the 2-inch extension sometimes catches a die or two. If it had been angled slightly, I think this would happen less.
Suggestion: I would really have liked the ability to have two tops feed into 1 out, so the dice path would have been a 'Y'. I could feed the dice into either top and they would come out the same exit, sort of like two guard towers on both sides of a gate.
Customer avatar
Mark P August 23, 2020 7:05 am UTC
I think you got the wrong part. The extension is just a straight chute down that goes under the mid piece.
Customer avatar
tennyson C May 05, 2020 11:53 pm UTC
Is this price in USD or Cad? And what are rough dementions of the display images?
Customer avatar
Bill G March 13, 2022 10:16 pm UTC
If you scroll to the bottom of the page, on the right in red, you will see an adjustable cost per country widget.
Customer avatar
Jared C May 19, 2019 6:53 pm UTC
Anyone else have an issue with the demon head a and b not fitting together? The bottoms line up perfectly, but the sides are skewed by about a quarter inch.
Customer avatar
Jared C May 20, 2019 5:17 pm UTC
The rest of the dice tower lines up perfectly and sits flush. Unfortunately if you have your heart set on using the demon head, it doesn't fit together and I personally wasn't able to use it. I printed two, being sure to re-level, and both turned out the same.
Customer avatar
Tom L January 18, 2020 10:11 pm UTC
I printed this last week and did not have this issue. 3D printing isn't quite a "download, press play, and walk away" technology yet, the Facebook group for Dragonlock has been very helpful. Once I got things dialed in, I was very happy with the results I got with the Demon Head version of the dice tower. First one was a gift, planning to print a second one for my own use here shortly.
Customer avatar
Brandon G April 24, 2020 12:44 am UTC
Problem is some of us refuse to give away our personal info for free. I would like to see the seller reply to threads like this on here.
Customer avatar
September 10, 2018 11:31 am UTC
This is very cool. There is one issue, however. Ive printed the bottom, extension and middle of a dice tower (25-ish hours) and only now discovered that, according to Cura, the tower top cant be sliced until it is scaled to 92.52% on my Monoprice Mini. doh! I dont care to fiddle about with tweaking the STL meshes. So I'm going to hope that the difference isnt enough that I cant epoxy the top on without using the clips (at 92% the clip holes are likely offset too much to be useful)

This is not a criticism at all. Just a tip for other folks using printers with a smaller print area: Load all the models into cura at least once and see if each peice can be printed at default size prior to printing anything. As I should have done...
Customer avatar
Steven W July 08, 2019 3:22 am UTC
I should have read this before I started printing. I printed the bottom and the middle just fine and then couldn't get the top sorted. I was able to split the STL File in half but will end up having to split it into quarters for it to fit properly on my MPS V2. It doesn't diminish the coolness of the overall screen.
Customer avatar
roy T September 06, 2018 7:13 am UTC
The email link takes me to drivethrurpg which is trying to charge me full price but I backed this item on Kickstarter.
Customer avatar
John B September 06, 2018 12:26 pm UTC
I got a separate email from DTRPG with my personalized link. Remember it was an Add-on in the KS, and automatically included only with Hero Level pledges 5-7. I'd jump over to KS and doublecheck your pledge. If you should have received it and didn't I'm sure FDG will get you setup. Just send them a PM on KS.
Customer avatar
Ember R September 06, 2018 1:53 pm UTC
I tried that, but it seems there is a limited time that KS keeps one's account on file if on doesn't keep logging in or pledging.....My account is gone.
Customer avatar
John B September 06, 2018 1:36 am UTC
Just got mine from the KickStarter. Can't wait to get started. You guys need to do a designer app or website to make it easier to plan the ultimate configuration. :)
Customer avatar
roy T September 06, 2018 7:11 am UTC
Maybe soon on
Customer avatar
John B September 06, 2018 12:35 pm UTC
Wow, how did I not know about this site? Thanks for pointing it out. :)
Customer avatar
Brian P September 06, 2018 12:46 am UTC
Any idea how much filament this will take on average?
Customer avatar
Thomas T September 06, 2018 1:43 am UTC
All depends on how big you build yours, and which options are selected for the individual modules. :)
Customer avatar
Patrick O September 07, 2018 11:36 am UTC
The estimates I'm seeing are 2-3Kg. So stock up!
Browse Categories
 Follow Your Favorites!
NotificationsSign in to get custom notifications of new products!

Product Information
Platinum seller
Publisher Stock #
File Size:
314.84 MB
Original electronic
Scanned image
These products were created by scanning an original printed edition. Most older books are in scanned image format because original digital layout files never existed or were no longer available from the publisher.

For PDF download editions, each page has been run through Optical Character Recognition (OCR) software to attempt to decipher the printed text. The result of this OCR process is placed invisibly behind the picture of each scanned page, to allow for text searching. However, any text in a given book set on a graphical background or in handwritten fonts would most likely not be picked up by the OCR software, and is therefore not searchable. Also, a few larger books may be resampled to fit into the system, and may not have this searchable text background.

For printed books, we have performed high-resolution scans of an original hardcopy of the book. We essentially digitally re-master the book. Unfortunately, the resulting quality of these books is not as high. It's the problem of making a copy of a copy. The text is fine for reading, but illustration work starts to run dark, pixellating and/or losing shades of grey. Moiré patterns may develop in photos. We mark clearly which print titles come from scanned image books so that you can make an informed purchase decision about the quality of what you will receive.
Original electronic format
These ebooks were created from the original electronic layout files, and therefore are fully text searchable. Also, their file size tends to be smaller than scanned image books. Most newer books are in the original electronic format. Both download and print editions of such books should be high quality.
File Last Updated:
September 05, 2018
This title was added to our catalog on September 05, 2018.