Title |
Publisher |
Price |
This product is for a a digital STL file for use with your 3D printer. This STL set provides a tray to place a 25mm or 30mm miniature to provide a raised lip to snap on small colored clips to represent status defined by the GM/DM. The clips are interchangeable on either tray. Each tray has a small handle with a texture surface so you can push or pick up and move the mini with all the status clips... [click here for more] |
Blessed Machine |
$3.00
|
 Atom Benny STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the picture... [click here for more] |
Blessed Machine |
$3.00
|
 Atom Benny STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the picture... [click here for more] |
Blessed Machine |
$3.00
|
 Bat Benny STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the picture... [click here for more] |
Blessed Machine |
$3.00
|
 Circuit Benny STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the picture... [click here for more] |
Blessed Machine |
$3.00
|
 Dynamite Dice Vault This product is for a set of digital STLs file for use with your 3D printer. Printed at the provided size, should allow thee internal space to fit ten 16mm dice.
Included with the STLs is a readme detailing printer settings to achieve the picture below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
 Game Tokens: Biohazard STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$3.00
|
 Game Tokens: Chemical Hazard STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to... [click here for more] |
Blessed Machine |
$3.00
|
 Game Tokens: Claw Mark STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$3.00
|
 Cornovavirus Benny STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the... [click here for more] |
Blessed Machine |
$3.00
|
 Game Tokens: Illuminati Symbol STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
This token also has a special feature. This model comes in... [click here for more] |
Blessed Machine |
$3.00
|
 Nuclear Benny
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the picture... [click here for more] |
Blessed Machine |
$3.00
|
 Game Tokens: Shuriken/Ninja Throwing Star STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer... [click here for more] |
Blessed Machine |
$3.00
|
 Gear Benny STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the picture... [click here for more] |
Blessed Machine |
$3.00
|
![Hazard Bennies [BUNDLE]](https://dtrpg-public-files.s3.us-east-2.amazonaws.com/images/7646/322411-thumb140.png) This special bundle product contains the following titles. Game Tokens: Biohazard Regular price: $3.00 Bundle price: $2.00 Format: STL (3D Model) Game Tokens: Biohazard STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent... [click here for more] |
Blessed Machine |
$9.00 $6.00
|
 Wanted Poster Name Plate with OpenLOCK Port Includes slot for US Poker Sized Dry Erase card.
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
 Lantern Ornament
This product is for a set of digital STLs file for use with your 3D printer. The base is designed to allow passing a typical incandescent Christmas tree light bulb into the lantern for extra fun.
Included with the STLs is a readme detailing printer settings to achieve the picture in the thumbnail. YMMV. ... [click here for more] |
Blessed Machine |
$3.00
|
 Lips and Fangs Benny STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$3.00
|
 Gaping Maw with Eye Benny STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$3.00
|
 Modular Flight Stand
This product is for a digital STL file for use with your 3D printer. This modular flight accessory includes the following pieces:
1 25mm x 1” base
1 20mm x 1” base
1 50mm x 1” base
1 25mm x 1” top section for miniature to rest
1 25mm x1” top section with embedded status tray
1 section x1” section
Using a 25, 30 or 50mm base, screw on 1” increments onto the... [click here for more] |
Blessed Machine |
$3.00
|
 This product is for digital STLs file for use with your 3D printer. This STL set includes a triangular name tent with a raised area for a 2 inch piece of dry erase tape to put character names and other important information about the player's character. This component also has a slot for the player's current action card, and slots for 5 bennies. The tent also has a cavity accessed with a door... [click here for more] |
Blessed Machine |
$4.00
|
 This product is for digital STL files for use with your 3D printer. Included are STLs for a modular bridge that can be expanded and length and width using OpenLOCK connectors.
Included with the STL is a readme detailing printer settings to achieve the picture in the thumbnail. YMMV.
www.printablescenery.com ... [click here for more] |
Blessed Machine |
$5.00
|
 Pentagram Benny STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the... [click here for more] |
Blessed Machine |
$3.00
|
 This product is for digital STL files for use with your 3D printer.
These Templates are included:
All-in-one Small, Medium, Large Blast Template
Cone Template
Designed to use the white-space of the template to determine if targets are within the template area.
Included with the STL is a readme detailing printer settings to achieve the picture in the thumbnail. YMMV. ... [click here for more] |
Blessed Machine |
$3.00
|
 This product is for digital STL files for use with your 3D printer. This STL set includes a pair of files that go together to form a rotating wheel. The bottom component is generic to display the Shaken and wound status numbers and the top includes two opitons. One with the Secret Agents of CROSS logo and the other is a dragon courtesy of Pinnacle Entertainment Group.
Included with the STL... [click here for more] |
Blessed Machine |
$4.00
|
 Secret Agents of CROSS benny STL.
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to... [click here for more] |
Blessed Machine |
$3.00
|
 Tombstone Name Plate with OpenLOCK Port Includes slot for US Poker Sized Dry Erase card.
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture below. YMMV
... [click here for more] |
Blessed Machine |
$3.00
|
 Vintage Ammunition Box
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture in the below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
 Vitruvian Man Benny STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$3.00
|
![Wild West Hardware Extras [BUNDLE]](https://dtrpg-public-files.s3.us-east-2.amazonaws.com/images/7646/340661-thumb140.jpg) This special bundle product contains the following titles. Bow & Arrow Ammunition Tracker with OpenLOCK Base Regular price: $3.00 Bundle price: $0.71 Format: STL (3D Model) OpenLOCK Bow & Arrow Ammunition Tracker
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$21.00 $5.00
|
 Yin Yang Benny STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the picture... [click here for more] |
Blessed Machine |
$3.00
|
 Ammunition Trays for Westerner's Dash for Six-gun, Derringer, Buffalo Rifle, Lever-Action Rifle or Shotgun. OpenLOCK trays for Six-gun, Derringer, Buffalo Rifle, or Lever-Action Rifle. Shells for Six-gun, Derringer, Buffalo Rifle, Shot gun, and Lever-Action Rifle included.
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer... [click here for more] |
Blessed Machine |
$3.00
|
 OpenLOCK Bow & Arrow Ammunition Tracker
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture in the below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
 OpenLOCK Buffalo Rifle Ammunition Tracker
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture in the below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
 Cowboy Boot Dice Tower. Includes removable spur. Includes separate OpenLOCK base dice corral embossed with Boot Barn.
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture below. YMMV.
Attributions:
Boot created by https://www.cgtrader.com/bilrob and can be found here: https://www.cgtrader.com/free-3d-print-models/fashion/shoes/cowboy-boots-531ce6a8-a13e-4288-81d8-eac4c7b36610... [click here for more] |
Blessed Machine |
$3.00
|
 OpenLOCK Derringer Ammunition Tracker
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture in the below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
 Aztec Coin Benny STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the... [click here for more] |
Blessed Machine |
$3.00
|
 Game Tokens: Bullet Hole Liberty Dollar STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer... [click here for more] |
Blessed Machine |
$3.00
|
 Power Chip Benny STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the... [click here for more] |
Blessed Machine |
$3.00
|
 Lever-Action Rifle Ammunition Tracker on OpenLOCK Base
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
 OpenLOCK Shotgun Ammunition Tracker
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
 Six Shooter Benny STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the... [click here for more] |
Blessed Machine |
$3.00
|
 OpenLOCK Six-gun Ammunition Tracker
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture in the below. YMMV.
\\
... [click here for more] |
Blessed Machine |
$3.00
|
 Spittoon Saloon Dice Tower. Includes removable spur.
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
 Spittoon Spend Round Container/Dice Tower
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture in the thumbnail. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
 Wanted Poster Name Plate with OpenLOCK Port Includes slot for US Poker Sized Dry Erase card.
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture in the thumbnail. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
 Westerner's Dash with OpenLOCK Ports
This product includes the STL for the main dash and 3x3 and 3x6 blank spacer bases. Ammunition Trackers, Ammunition Traysm, Card, dice, and tokens are not included in this set. OpenLOCK clips are available at printable scenery.
Included with the STLs is a readme detailing printer settings to achieve the picture in the below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
![Wild West Hardware The Whole Rodeo (STL Tier) [BUNDLE]](https://dtrpg-public-files.s3.us-east-2.amazonaws.com/images/7646/338651-thumb140.jpg) This special bundle product contains the following titles. Ammunition Trays Regular price: $3.00 Bundle price: $1.33 Format: STL (3D Model) Ammunition Trays for Westerner's Dash for Six-gun, Derringer, Buffalo Rifle, Lever-Action Rifle or Shotgun. OpenLOCK trays for Six-gun, Derringer, Buffalo Rifle, or Lever-Action Rifle. Shells for Six-gun, Derringer, Buffalo... [click here for more] |
Blessed Machine |
$45.00 $20.00
|