| Title |
Publisher |
Price |
What is CROSS?
CROSS is a clandestine spy agency also known as the Catholic Response Organization to Strategize and Strike. CROSS was created by rogue Cardinal James McDonnell to take the Pope's prayers and convert them into actions. He and his command staff create missions to protect the flock from evil using cutting-edge technology coupled with saintly magic honed over 2000... [click here for more] |
Blessed Machine |
$6.00
|
This product is for a a digital STL file for use with your 3D printer. This STL set provides a tray to place a 25mm or 30mm miniature to provide a raised lip to snap on small colored clips to represent status defined by the GM/DM. The clips are interchangeable on either tray. Each tray has a small handle with a texture surface so you can push or pick up and move the mini with all the status clips... [click here for more] |
Blessed Machine |
$3.00
|
This product contains the floorplan for an airplane hangar. This title includes a single jpeg image. ... [click here for more] |
Blessed Machine |
$2.00
|
Ammunition Trays for Westerner's Dash for Six-gun, Derringer, Buffalo Rifle, Lever-Action Rifle or Shotgun. OpenLOCK trays for Six-gun, Derringer, Buffalo Rifle, or Lever-Action Rifle. Shells for Six-gun, Derringer, Buffalo Rifle, Shot gun, and Lever-Action Rifle included.
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer... [click here for more] |
Blessed Machine |
$3.00
|
![Blessed Machine ICONS Products [BUNDLE]](https://d1vzi28wh99zvq.cloudfront.net/images/7646/148158-thumb140.jpg)
This special bundle product contains the following titles.
Combat Record Sheet (ICONS) Regular price: $0.99 Bundle price: $0.00 Format: Watermarked PDF
This sheet is a custom Combat Record Sheet the GM can use to control his NPCS during combat. ICONS: Assembled Edition. ...
Evilution Unchained (ICONS) Regular price: $15.00 Bundle... [click here for more] |
Blessed Machine |
$20.99 $12.15
|
OpenLOCK Bow & Arrow Ammunition Tracker
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture in the below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
OpenLOCK Buffalo Rifle Ammunition Tracker
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture in the below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
This sheet is a custom Combat Record Sheet the GM can use to control his NPCS during combat. Hero System 6e.
... [click here for more] |
Blessed Machine |
Pay What You Want
|
This sheet is a custom Combat Record Sheet the GM can use to control his NPCS during combat. ICONS: Assembled Edition.
... [click here for more] |
Blessed Machine |
Pay What You Want
|
This product contains the floorplan for a cow pond. This title includes a single jpeg image. ... [click here for more] |
Blessed Machine |
$2.00
|
Cowboy Boot Dice Tower. Includes removable spur. Includes separate OpenLOCK base dice corral embossed with Boot Barn.
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture below. YMMV.
Attributions:
Boot created by https://www.cgtrader.com/bilrob and can be found here: https://www.cgtrader.com/free-3d-print-models/fashion/shoes/cowboy-boots-531ce6a8-a13e-4288-81d8-eac4c7b36610... [click here for more] |
Blessed Machine |
$3.00
|
OpenLOCK Crossbow Ammunition Tracker
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture in the below. YMMV.
... [click here for more] |
Blessed Machine |
$4.00
|
OpenLOCK Derringer Ammunition Tracker
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture in the below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
Dynamite Dice Vault This product is for a set of digital STLs file for use with your 3D printer. Printed at the provided size, should allow thee internal space to fit ten 16mm dice.
Included with the STLs is a readme detailing printer settings to achieve the picture below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
Evilution Unchained is a three act mystery adventure that takes the heroes throughout the city to solve a series of high profile kidnappings. Heroes will hunt for clues on nine fully detailed color maps to discover a horrific plot that threatens the entire campaign city.
Also, the heroes will meet a fresh batch of supervillains as they try to solve the mystery of Evilution Unchained.
This... [click here for more] |
Blessed Machine |
$15.00
|
Evilution Unchained is a three act mystery adventure that takes the heroes throughout the city to solve a series of high profile kidnappings. Heroes will hunt for clues on nine fully detailed color maps to discover a horrific plot that threatens the entire campaign city.
Also, the heroes will meet a fresh batch of full color supervillains as they try to solve the mystery of Evilution Unchained.
This... [click here for more] |
Blessed Machine |
$15.00
|
Character Sheets from Evilution Unchained in Hero Designer format.
... [click here for more] |
Blessed Machine |
$3.99
|
This product contains the floorplan for a bar & grill restaurant called Frothy's. This title includes a singple jpeg image. ... [click here for more] |
Blessed Machine |
$2.00
|
Game Tokens: Aim Status STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens:Ammo STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Arcade Coin STL This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Atom STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Aztec Coin STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Bandage STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Battery STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Biohazard STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Black Widow STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Blessed Machine Logo STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Blinded Status STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Bomb STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Bound Status STL This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Brain Benny STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the picture... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Brown Bear Paw STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Caddy STL
This product is for a digital STL file for use with your 3D printer. This caddy will hold up to 400 tokens from the Blessed Machine token collection available here:
https://www.drivethrurpg.com/browse/pub/7646/Blessed-vMachine/subcategory/22110_40245/Tokens
Included with the STL is a readme detailing printer settings to achieve the picture below. YMMV.
... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens:Caddy Tube (Modular) STL
This product is for a digital STL file for use with your 3D printer. This product is a set of modular tubes that can be connected with an OpenLOCK clip at the top and bottom. There are several sizes but standardizing on one size makes the most sense if you want to use the OpenLOCk clips. There are also spacers in various sizes that you can use to fill up... [click here for more] |
Blessed Machine |
$2.00
|
Game Tokens: Camera STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Card Suits STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$4.00
|
Game Tokens: Carrot STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Caterpillar STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Chaos STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Chemical Hazard STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Circuits STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Claw Mark STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Cola Bottle Cap STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Coronavirus STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Crossed Swords STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Crosses STL.
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Defend Status STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Distracted Status STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Dragon Head STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Log In 
