| Title |
Publisher ▲ |
Price |
These are like the basic cavern edges, except more dynamic... Bring your multilevel cavern to life with a variety of edge options. Check out the preview below and enjoy!
Set Preview:
:lang="en">Dynamic Cavern Edges Set
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well. Cheers! ... [click here for more] |
Fat Dragon Games |
$4.99
|
Take your decks to the next level, literally! This set includes everything you need for multi-level cavern decks. Check out the preview below. Enjoy!
Set Preview:
:lang="en">Elevated Cavern Deck Set
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well. Cheers! ... [click here for more] |
Fat Dragon Games |
$14.99
|
The caverns needed better corners to work with water. So I made some.
DRAGONBITE™ Community Creator model.
For suggested print settings, please download the free Dragonlock™ Ultimate: Free Sample Set here: /product/197128/DRAGONLOCK-Ultimate-Free-Sample-Set
Download the free DRAGONBITE™ Clip model here: /product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20... [click here for more] |
Fat Dragon Games |
$1.00
|
The elevated wet cavern deck set adds a fantastic multi-level deck experience to any cave. Check out the preview below and enjoy!
Set Preview:
:lang="en">Elevated Wet Cavern Decks Set
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well. Cheers! ... [click here for more] |
Fat Dragon Games |
$9.99
|
This set of 3D-printable STL models was born when I tried to model a multi-level fortress with stairs near the inside walls and some 5" wide rooms on the lower level. FDG Dungeon Expansion 11 has 2x1" models that would work, except they only have clip slots on the long side and I needed clip slots on the short edges too.
Thus, this set contains versions of the 2"x1" floor and walls from FDG Dungeon... [click here for more] |
Fat Dragon Games |
$5.99
|
Enjoy this free FDG Dragon Logo wall.
FDG Dragon Wall Tile by skipatlan on Sketchfab
DRAGONBITE™ Community Creator model.
For suggested print settings, please download the free Dragonlock™ Ultimate: Free Sample Set here: /product/197128/DRAGONLOCK-Ultimate-Free-Sample-Set
Download the free DRAGONBITE™ Clip model here: /product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20... [click here for more] |
Fat Dragon Games |
$2.00
|
A requested remix from Jim, this remix of the magic wall is ready to burn your players to a crisp.
... [click here for more] |
Fat Dragon Games |
$1.99
|
This set of 3D-printable STL terrain was inspired by the Dungeon of the Dead Three. That’s a basement dungeon, where the low points of the dungeon are flooded by foul-smelling water from the nearby sewers.
This set is designed so the sewer-flooded level is below a dry level of dungeon. There are two styles of tiles in the set to make this work (you can use either or both):
3” high... [click here for more] |
Fat Dragon Games |
$11.99
|
Like the core Flooded Dungeons set, this 3D-printable STL terrain was inspired by the Dungeon of the Dead Three. That’s a basement dungeon, where the low points of the dungeon are flooded by foul-smelling water from the nearby sewers.
This set adds new ways to connect your flooded dungeons to caverns and dry dungeons, as well bringing in a mid-corridor doorway and pipe walls to increase the,... [click here for more] |
Fat Dragon Games |
$8.99
|
Gaoler Lou's is your source for FDG Dungeon Windows, Jails, Prison Bars, Shackles, and all the other models you need to make sure those pesky adventurers stay locked up until the trial or other, faster methods of "Justice." Included in this set are new Dungeon windows, with and without bars or grates. There are also Village Walls A-E for a new Prison Wall setup to match Arenwel's awesome prisons.... [click here for more] |
Fat Dragon Games |
$12.99
|
Welcome to the Gaping Portal Tavern, the most famous Tavern in Waterdrop City, where you can have an Ale and muster up your courage to get lowered down into the well (to have a drink of water maybe?).
This piece needs to be printed four times to get a 10"x10" Tavern floor section with an 8" wide well hole in the middle. The walls are 22mm high off the base giving an impression of being just above... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This is a remix of the dice tower from the GM Screen Of Doom. I added a cup/pen or pencil holder to the top. I also added a bottom and middle drawer option. One with a demon face and the other is plain stone. There is also a bottom and middle shelf option with a slight slant. You can mix and match shelves and drawers to make it the way you like.A link to the original file is at the bottom.
https://www.drivethrurpg.com/product/251695/DRAGONLOCK-Ultimate-GM-Screen-of-DOOM?src=hottest_filtered... [click here for more] |
Fat Dragon Games |
$2.99
|
Expand your GM Screen with this remixed skull dice tray.
This set would not have been possible without the work of Peter Kirylo, Sr. He will share in the royalties for this set, as he is due for his wonderful circle tray model I needed to craft it. I look forward to working with him again to bring great models to this community.
Printing instructions:
6 top layers minimum suggested for this model.... [click here for more] |
Fat Dragon Games |
$1.99
|
The FDG Village 4x4 street tiles, gridded upon request for the FDG Facebook Community. A special thanks the Raphael Fellipe for his help test printing. Includes 9 4x4 tiles from the Village Streets.
... [click here for more] |
Fat Dragon Games |
$3.00
|
Here's a micro Ghost, just in time for Halloween! Scaled to be used with the Micro Dungeons set. Should print without supports.
Print using FDG Cura mini settings, or equivalent.
Also includes a scaled up 32 mm version... if for some reason you wanted to print him that big.
Remember to use your clips on their sides for the Micro Dungeons, the side of the tile should look like it has a duck mouth... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
It's not just for the Sinister Secret of Saltmarsh... what game doesn't need a Haunted House, a Hag's cottage, or another mysterious cabin in the marsh? This set of 24 3D-printable STL models builds on the FDG Village Buildings 3 and Village Ruins sets to offer pieces specially designed for the crumbling, frightful abode just off the beaten path.
Included Models:
Recommended Print Settings:
Layer... [click here for more] |
Fat Dragon Games |
$9.99
|
A haunted house deserves an interesting interior… after all, witches and hags leave their mark. Whether in the basement or locked away in a back room, these 3D-printable STL files will give some spirit to your haunted house!
Recommended Print Settings:
Layer Size: 0.15mm, or 0.1mm for finer detail
Infill: 15% for all models recommended, 5% minimum
Top/Bottom... [click here for more] |
Fat Dragon Games |
$7.99
|
Everything you need to build basic hex dungeons. 26 new models using the Fat Dragon Dungeon walls on Hex Bases. Either put these together with the included pegs, or use the modified Dragonbite Clips (also included) for a tighter fit.
Pieces include;
Left Corner
Right Corner
T-wall
T-wall with right or left corners on the opposite end
Three door frames
Twelve Different Floor Shapes
Three... [click here for more] |
Fat Dragon Games |
$9.99
|
This expansion includes newly mixed Fat Dragon Games models on hex bases to compliment the Hex Dungeon Starter Set.
... [click here for more] |
Fat Dragon Games |
$7.95
|
Included in this set are 13 themed models to augment your Fat Dragon Games dungeons with an H. P. Lovecraft inspired set. Included in this set are the following models:
4x4 Elder Brain (with a slot for tea light underneath)
1 inch Separate Wall - Cthuhlu Long Face
2 inch Separate Wall - Cthuhlu Long Face
2 inch Separate Wall - Cthuhlu Brain (Previously released in Separate Walls #1)
Angled Wall... [click here for more] |
Fat Dragon Games |
$3.00
|
This is a collection of one inch by one inch dungeon tiles that use modified Dragonlock Clips to clip together. Sometimes you have to build a HUGE dungeon that could take up three 4X8 tables if you did it to scale. With these, you could fit that dungeon on your dining room table, and still have room for character sheets.
Maybe you are into OSR games with huge sprawling dungeons, or you prefer pen... [click here for more] |
Fat Dragon Games |
$4.95
|
Three LED tiles for the Micro Dungeons set. Slip the bulb in, then the battery under the tile. Bend the wires around and put one on top, one on bottom. The flame and water swap out easily, so no need to print multiple bases, unless you want to. I print the bases at .2 with the FDG cura settings plus 3 walls, and the tops with the FDG mini cura profile. No supports needed, unless you are concerned with... [click here for more] |
Fat Dragon Games |
$2.95
|
Included in this set are 21 awesome new tiles to compliment your Fat Dragon Games Caverns! This set is specifically made to compliment the FDG Caverns Expansion 1, Wet Caverns, and Dry Caverns.
More Caverns Display
Download the free DRAGONBITE™ Clip model here: /product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20... [click here for more] |
Fat Dragon Games |
$9.00
|
I am excited to release this set! It is designed to perfectly integrate with existing FDG dungeon and catacomb sets or it can stand alone. The set includes 30 unique tiles, a custom door and lintel, and a special LED Torch Wall. The set also includes two versions of the pentagram centerpiece as well as mutiple floor variations so you can choose your favorite.
As you can see from the pics and if you... [click here for more] |
Fat Dragon Games |
$9.99
|
These are walls and a dungeon floor that make it possible to open the walls of your tower like a cabinet, so that you dont need to take the tower completely apart to use it. Instead, it opens like a "playset". the floors can optionally stay attatched to the swinging walls to make it easier to access the decor and miniatures inside, if so desired, or, you can open just the walls to retain the round... [click here for more] |
Fat Dragon Games |
$7.95
|
A small collection of 3 inch tiles I made for Michael Potter. There are a couple of different lock options, so that if you needed a 15 foot wide hall, you can center a door at the end with the "4 lock" version. Alternatively, if you need to butt up against a 2x2 tile, you will want to use a "6 lock" option. There is also an experimental "8 lock" option on the 2x3 tile.
Included... [click here for more] |
Fat Dragon Games |
$1.00
|
This huge set of terrain, Remix Requests 2, is a collection of several smaller requests from the patrons who continually support my success and allow me to create so many wonderful tiles! This set is dedicated to all of you. Thank you so very much for granting me your trust and support!
Chasm 2: Crow Pie Cavern - This 30 item set expands on the Chasm 1 set that Aaron Mulder and I did last year. ... [click here for more] |
Fat Dragon Games |
$29.99
|
The Riverside Core set is designed to integrate with the Woodland Sets to provide a more immersive outdoor battleground. This set comes with 18 unique 4x4 tiles. When combined with the other Woodland and Riverside sets, this can be expanded to over 20sqf of sprawling woodlands and rivers!
Recommended Print Settings:
FDG Terrain Profile
Optimal Layer Height: .1 or .2 minimum with adaptive layer settings... [click here for more] |
Fat Dragon Games |
$9.99
|
The Riverside Elevation set is designed to integrate with the other Riverside and Woodland Sets to provide a more immersive outdoor battleground. This set comes with 24 unique 4x4 tiles. When combined with the other Woodland and Riverside sets, this can be expanded to over 20sqf of sprawling woodlands and rivers!
Recommended Print Settings:
FDG Terrain Profile
Optimal Layer Height: .1 or .2 minimum... [click here for more] |
Fat Dragon Games |
$9.99
|
Glad tidings are here! No more shall the long-suffering GMs of this world toil with no escape. Never again shall they be forced to endure session after session of murder-hobo antics. Now, no matter what Fat Dragon Games dungeon your players have seen fit to debase, you'll have the solution. “Rocks Fall, Players Die” is the newest and last Community Creator set you’ll need for... [click here for more] |
Fat Dragon Games |
$3.99
|
A haunted house or spooky graveyard deserves more than a set of pristine walls… So this set of 15 3D-printable STL models builds on the FDG Cemetery set and the freestanding wall from FDG Village Items 2 to bring you more worn and busted-up walls. Perfect for that house that just hasn’t been tended for a decade or two… at least, not by living caretakers.
Note that the walls and posts here... [click here for more] |
Fat Dragon Games |
$9.99
|
Included in this free set are 6 models for secret rotating doors. The original rotating cavern door was included in the Centurion set, but with the release of the revised Cavern set from Fat Dragon Games, it seemed fitting to release a new version and update to the legacy. This rotating door rotates on the side rather than the middle.The Tavern tile rotates from the middle.
It is recommend to use... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Included in this model are 8 9 models for Fat Dragon Games Dragonlock system. These 2" Separate Walls are available in the following flavors.
Alcove (added 9-24-18)
Cthulu Brain
Cobra
Eye Symbol (Pristine)
Eye Symbol (Ruined)
Web Crests
Spider Crests
Large Spider
5e Medal
Many thanks to the contributing artists who lent very wonderful textures under the lovely CC-AO License.Elazro,... [click here for more] |
Fat Dragon Games |
$2.00
|
Ready to expand your sewers? This set is designed to integrate smoothly with the FDG village sewer set to provide deeper sluiceways, pools, archways, crossings, bridges, and other misc. switches and cranks. Enjoy!
Preview:
:lang="en">Sewer Expansion
For best quality prints, use the FDG terrain profile at .2mm or better height. Cheers! ... [click here for more] |
Fat Dragon Games |
$14.99
|
Though there are a number of watery sets -- indoor, outdoor, and underground -- it seems a little boring to have just plain water tiles “in the middle.” This set of 3D-printable STL models spices up a river or lake with some wreckage that might suggest past (or future!) events. Kraken not included.
Note: there are two styles of water tiles in the Fat Dragon Games... [click here for more] |
Fat Dragon Games |
$4.99
|
This set of 3D printable STL models provides roofs for small houses, such as the buildings in the port village in the Kobold Docks map by Dyson Logos. This includes a pyramid-shaped roof for 4x4" buildings, and 2" roofs for small C, L, or T shaped buildings. These roofs can be used in conjunction with a number of FDG village sets, though the models are based on the roofs from... [click here for more] |
Fat Dragon Games |
$7.99
|
Get your adventurers out of those comfy dungeons with their straight walls and into the sloped cramped feeling Spider Caverns. Multiple wall tiles have passageways in them that could lead to treasure or tragedy. Two egg sac scatter terrains are included in this set. Compatible with the DRAGONLOCK™ system. The use of the thinner V3 Dragonbite™ clips is recommended. The use of the Fat Dragon... [click here for more] |
Fat Dragon Games |
$9.99
|
This is an add-on set for the Fat Dragon Games Tavern sets. This set includes 3 2" straight walls with peg holes, 4 angled walls with peg holes, a tavern corner with peg holes (without attached floor) and 2 corner edge clips with a wooden texture.
These pieces are designed so that they can connect vertically to one another to form taller rooms without needing to connect to a floor tile.
*Please... [click here for more] |
Fat Dragon Games |
$4.99
|
Someone asked me for this, so I made it, hopefully its not out there already. ... [click here for more] |
Fat Dragon Games |
$1.00
|
This is an add-on for the Fat Dragon Games Tavern Set. This set includes five angled tiles; two walls, two windows and a door with a sidewalk texture set on one side of the tile so that these tiles can connect to Fat Dragon Games sidewalks and streets.
Note: This set does not include the window inserts, shutters, door, lintil or door hinge included in either the FDG Classic Tavern Set or the Spererate... [click here for more] |
Fat Dragon Games |
$2.99
|
This Set includes the tavern base tile to create a trapdoor using either the metal frame and standard trapdoor (as pictured on the right) from the FDG Tower of Terror set* or using the wooden frame and hidden trapdoor included in this set (shown on the left).
The hidden trapdoor has hinges and a handle on only one side of the door so when flipped over it appears as a standard tavern floor.
*The... [click here for more] |
Fat Dragon Games |
$1.99
|
This is a set tile edge clips with a wooden texture on it that can be attached to any Fat Dragon Games standard sized tile as well as the Seperate Tavern Angled Walls A and B. This set does not include any tiles, just the clips. ... [click here for more] |
Fat Dragon Games |
$1.99
|
Terry wanted one of these, so i took a crack at it. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This is a collection of five webs, a nest full of eggs and a previous spider victim that can connect to a wall via a peg.
*Note, this set contains no tiles, but the webs are designed to fit on any standard Fat Dragon Games classic wall tile. The spider victim can connect to any wall, or post, with a peg hole in it. ... [click here for more] |
Fat Dragon Games |
$1.99
|
This is a set of 38 timber and stone classic walls set atop tiles with the castle floor texture. This set includes walls, window and door frames, castle floors and decrative posts. Included in the set are variations with wall item holes and sidewalk textures along the outside of angled doors, windows and walls.
*Not included, but required for this set, are the window and door lintels, shutters,... [click here for more] |
Fat Dragon Games |
$14.99
|
This set includes a number of tower walls and floors to expand the selection in the FDG Tower of Terror set and the prior Tower Add-On 1 set. The two new styles are:
Tower walls with castle floors on the inside, and village sidewalk on the outside, for towers as part of a village map
Tower walls with castle floors on the inside, and dirt/grass on the outside, for outdoor towers
Each style includes... [click here for more] |
Fat Dragon Games |
$7.99
|
Included in this set are 20 remixed files for Fat Dragon Games Tower of Terror 3d terrain set. You'll need that base set to make full use of these tiles.
These tiles will help you connect to other FDG dungeon terrain models and add variation to your existing towers.
... [click here for more] |
Fat Dragon Games |
$6.99
|
This is a remix for the Tower of Terror set for integrating into the Woodland Sets. This does not include the rest of the tower. It only includes the door and 4 tiles shown in the cover preview. Enjoy!
This requires the purchase of the FDG Tower of Terror set to complete tower.
Recommended Print Settings:
Use official FDG Printing Profiles
Layer Height: .2
Infill: 5% ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Shh! Did you hear that? I think there is something in that rubble over there!
Tremors in the Rubble contains 8 brand new tiles and 1 new loose debris for the Fat Dragon Games Dragonlock Dungeons. Each tile has a Before and After variant, so you can replace them when the players get close enough to attack (or make the perception check). Plenty of flat space to put treasure chests and other enticements,... [click here for more] |
Fat Dragon Games |
$2.00
|
Our good friend and patron Tim requested this. He was very kind to test print it and take pictures. Tim has been a supporter of Aether for a long time, and he continues to inspire us to make amazing things. Thank you Tim. Thank you to all our patrons who make it possible for us to do what we love.
... [click here for more] |
Fat Dragon Games |
$0.99
|
Log In 
