| Title |
Publisher |
Price |
A remix of the throne from Realm of The Mountain King as a secret door
Dragonbite clips can be found here:
www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20
Recommened Settings:
Layer Height: 0.2mm or less
Infill: 10%, 5% minimum
Top/Bottom Layers: 8 Top/ 4 Bottom
Shell... [click here for more] |
Fat Dragon Games |
$1.99
|
Set of spiral stairs done in the style of Realm of the Mountain King set from Fat Dragon Games.
4 2x2 stairs and 1 set of stackable stairs
Dragonbite clips can be found here:
www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20
Recommened Settings:
Layer Height: 0.2mm or less
Infill: 10%, 5% minimum... [click here for more] |
Fat Dragon Games |
$2.99
|
This is a remix is tiles to stand alone or with the Realm of the Mountain King set from Fat Dragon Games. The set includes 7 4x4 base tiles, 10 no edge tiles, 4 battlement tops, 1 roof top, dwarven lintel, dwarven door, dwarven trap door and stackable spiral stairs. Spriral stairs can be used by adding dwarven core tiles to expand the tower
Update: added peg... [click here for more] |
Fat Dragon Games |
$5.99
|
Are you sick and tired of never being able to represent the dragons hoard like you want? I am really excited to share this set! This is the Dwarven Treasure set that has all you need, but is recommended to pair with the Core Treasure Set for larger troves!
This set includes 62 unique tiles! With such a huge variety of floor and wall tiles, the possibilities are endless!
I recommend printing in... [click here for more] |
Fat Dragon Games |
$9.99
|
Fat Dragon's Realm of the Mountain King wall tile mixed with the Dwarven Brazier. I have also made a space to put the LED light frame found here,
https://www.drivethrurpg.com/product/309914/LED-Light-Frame--357-Cell
Fat Dragon's Realm of the Mountain King can be found here,
https://www.drivethrurpg.com/product/240135/DRAGONLOCK-Ultimate-Realm-of-the-Mountain-King ... [click here for more] |
Fat Dragon Games |
$1.00
|
These are like the basic cavern edges, except more dynamic... Bring your multilevel cavern to life with a variety of edge options. Check out the preview below and enjoy!
Set Preview:
:lang="en">Dynamic Cavern Edges Set
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well. Cheers! ... [click here for more] |
Fat Dragon Games |
$4.99
|
Take your decks to the next level, literally! This set includes everything you need for multi-level cavern decks. Check out the preview below. Enjoy!
Set Preview:
:lang="en">Elevated Cavern Deck Set
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well. Cheers! ... [click here for more] |
Fat Dragon Games |
$14.99
|
This set of 3D-printable STL models complements other sets such as FDG Dungeon Delve 1, Dungeon Delve 2, and Dragonbite Dungeon Balconies, to add pools at the elevated dais/balcony level. This set includes the following elevated pool tiles:
An elevated water tile
Two elevated "inner" pool corners (angled and straight)
Two elevated "outer" pool... [click here for more] |
Fat Dragon Games |
$4.49
|
The caverns needed better corners to work with water. So I made some.
DRAGONBITE™ Community Creator model.
For suggested print settings, please download the free Dragonlock™ Ultimate: Free Sample Set here: /product/197128/DRAGONLOCK-Ultimate-Free-Sample-Set
Download the free DRAGONBITE™ Clip model here: /product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20... [click here for more] |
Fat Dragon Games |
$1.00
|
The elevated wet cavern deck set adds a fantastic multi-level deck experience to any cave. Check out the preview below and enjoy!
Set Preview:
:lang="en">Elevated Wet Cavern Decks Set
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well. Cheers! ... [click here for more] |
Fat Dragon Games |
$9.99
|
This set of 3D-printable STL models was born when I tried to model a multi-level fortress with stairs near the inside walls and some 5" wide rooms on the lower level. FDG Dungeon Expansion 11 has 2x1" models that would work, except they only have clip slots on the long side and I needed clip slots on the short edges too.
Thus, this set contains versions of the 2"x1" floor and walls from FDG Dungeon... [click here for more] |
Fat Dragon Games |
$5.99
|
This is my rendition of the ship Famine-20 from Stephen Newtons book, Children of the Fallen Sun, for Mutant Crawl Classics. I made this ship in Micro Scale, because at standard terrain size, it would take up an entire 4 foot by 8 foot table easily. With the surrounding crashsite, this is a little over, or right around two feet long, and about 10 inches wide. This sprawling dungeon features stackable... [click here for more] |
Fat Dragon Games |
$14.95
|
Includes designs for both FDG Dungeon and Dwarven style Brazier Pillars. Eight lightable covers, and an open iron frame for each of the two styles. Dungeon style is a round base and fits either.
Dwarven style has an octagon base to lock into the top of the pillar. Open Iron frame can be used with the FDG Brazier Flame (included with that, but not included in this pack). Either sand the flame a... [click here for more] |
Fat Dragon Games |
$2.00
|
These are simple modifications to the Fat Dragon Games dungeon corner tile and dungeon wall tile to have built-in stairs going down. Two versions of the side wall are provided, allowing for stairs heading into the wall, or parallel with it.
Don't forget that you can mirror the tiles to have the stairs point down toward the other wall in the corner, or go down in the other direction on the side wall.... [click here for more] |
Fat Dragon Games |
FREE
|
FDG custom profile for printing miniatures on the Bambu Lab A1 Mini 3D printer. This profile requires a .2mm nozzle, and we recommend watching the YouTube video linked below. BEFORE USING READ THE INCLUDED INSTRUCTION PDF.
Be sure to turn on e-mail notifications from FDG in your DrivethruRPG user account so you will get an e-mail notification anytime we update these files. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
UPDATED FOR CURA 5.6x!
FDG custom Cura profile for Creality 3D printers (Ender-2 Pro, Ender 3, Ender 3 Pro, Ender 3 v2, Ender-3 V2 Neo, Ender 5, CR-10).
FOR CREALITY SPRITE DIRECT DRIVE EXTRUDERS CHANGE RETRACTION DISTANCE TO 1mm!
Be sure to turn on e-mail notifications from FDG in your DrivethruRPG user account so you will get an e-mail notification anytime we update these files.... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
UPDATED FOR CURA 5.4x!
FDG custom Cura profile for Creality 3D printers (Ender-2 Pro, Ender 3, Ender 3 Pro, Ender 3 v2, Ender 5, CR-10).
Be sure to turn on e-mail notifications from FDG in your DrivethruRPG user account so you will get an e-mail notification anytime we update these files. ... [click here for more] |
Fat Dragon Games |
FREE
|
Enjoy this free FDG Dragon Logo wall.
FDG Dragon Wall Tile by skipatlan on Sketchfab
DRAGONBITE™ Community Creator model.
For suggested print settings, please download the free Dragonlock™ Ultimate: Free Sample Set here: /product/197128/DRAGONLOCK-Ultimate-Free-Sample-Set
Download the free DRAGONBITE™ Clip model here: /product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20... [click here for more] |
Fat Dragon Games |
$2.00
|
This quick 3D print will assist you in making repeatable bends in your LEDs to fit the FDG LED frame used in LED Walls FDG0250 and FDG0251. Will fit a standard 5mm LED snugly to hold during bending process.
ALSO Compatible with the new Vallis Mortis Kickstarter, and FDG0278 and FDG0279!
PDF instructions included.
Also included in this is a modified LED frame that includes a Brim Killer. Printing... [click here for more] |
Fat Dragon Games |
$2.00
|
These racks will hold your FDG minis for transportation, and stack to take up less shelf space. Non-locking versions are also included. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
A firepit with three, removable basins for each stage of fire: sticks, fire, coals.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at .12mm layer height (or smaller) using PLA or ABS plastic, although you can achieve even better results with SLA/DLP printers... [click here for more] |
Fat Dragon Games |
$2.99
|
A requested remix from Jim, this remix of the magic wall is ready to burn your players to a crisp.
... [click here for more] |
Fat Dragon Games |
$1.99
|
Fireplace set - two different styles with modified wall items from the FDG Village wall items. The Dragons head, sword and shield, and fish have a 5.5 mm x 3.5 mm hole and the frames have a 2.5 mm x 1.5 mm hole in the backs for magnets. I also made larger rectangle and oval frames.
the original files are here https://www.drivethrurpg.com/product/232660/DRAGONLOCK-Ultimate-Village-Wall-Items?manufacturers_id=346... [click here for more] |
Fat Dragon Games |
$1.99
|
This set lets you make mostly flat timberframe roofs of any size or shape you want. Clip them together with Dragonlock clips the same way you would do with dungeon tiles. Also includes a version with short timberframe walls bordering a gravel or tar covered roof, and an edge clip with roof texture to use with any flat tile you want. The edge clip can also be used as a decorative accent on multi-story... [click here for more] |
Fat Dragon Games |
$2.99
|
This set of 3D-printable STL terrain was inspired by the Dungeon of the Dead Three. That’s a basement dungeon, where the low points of the dungeon are flooded by foul-smelling water from the nearby sewers.
This set is designed so the sewer-flooded level is below a dry level of dungeon. There are two styles of tiles in the set to make this work (you can use either or both):
3” high... [click here for more] |
Fat Dragon Games |
$11.99
|
Like the core Flooded Dungeons set, this 3D-printable STL terrain was inspired by the Dungeon of the Dead Three. That’s a basement dungeon, where the low points of the dungeon are flooded by foul-smelling water from the nearby sewers.
This set adds new ways to connect your flooded dungeons to caverns and dry dungeons, as well bringing in a mid-corridor doorway and pipe walls to increase the,... [click here for more] |
Fat Dragon Games |
$8.99
|
This set adds floor to ceiling windows to your villages in Timberframe, Feildstone, and Timber & Stone. It includes C walls with 1 large window and D walls with 1, 2, and 3 windows.
There is a standard window pattern along with 2 variations of stained glass sword, and a special Dragonlock 3 stained glass window in honor of the Dragonlock 3 Kickstarter. Each of these has a version with panes in... [click here for more] |
Fat Dragon Games |
$3.99
|
This Barn set contains models by several of us who were active on the FDG forums for many months, in particular Arenwel, Colin, Aaron, and I. It was a wonderful time of learning for us and Arenwel was a wonderful instructor. He and Colin were the primary artists on this set, and we hope you all of the hard work and effort that went into this set.
Other sets often used for Barn Construction:
FDG Village... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Gaoler Lou's is your source for FDG Dungeon Windows, Jails, Prison Bars, Shackles, and all the other models you need to make sure those pesky adventurers stay locked up until the trial or other, faster methods of "Justice." Included in this set are new Dungeon windows, with and without bars or grates. There are also Village Walls A-E for a new Prison Wall setup to match Arenwel's awesome prisons.... [click here for more] |
Fat Dragon Games |
$12.99
|
Welcome to the Gaping Portal Tavern, the most famous Tavern in Waterdrop City, where you can have an Ale and muster up your courage to get lowered down into the well (to have a drink of water maybe?).
This piece needs to be printed four times to get a 10"x10" Tavern floor section with an 8" wide well hole in the middle. The walls are 22mm high off the base giving an impression of being just above... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
On the suggestion of Lou Anders on things that would have been nice to have in the Castle Starter Set, I took it upon myself to make a 4x2 trapdoor tile for the gatehouse so that it could be centered on the structure.
But why stop there? One piece? Boring! So I added a 4x4 trapdoor, just so you have one for every occasion.
And just because I thought it would be an awesome addition, I've also included... [click here for more] |
Fat Dragon Games |
$1.99
|
The Gibbet Set
This is my Gibbet Set ~ It includes 3 differint dice tower bottoms, one has a gibbet hanging on both sides of the opening. The other two are on the left and right. A 4X4 tile with a tall post to hang your gibbet from that is on a village street tile. An A and C Gatehouse tile remixed to hang a gibbet from. The top of tree D with a hole for the hook to hang the gibbet from. You will... [click here for more] |
Fat Dragon Games |
$2.00
|
This is a remix of the dice tower from the GM Screen Of Doom. I added a cup/pen or pencil holder to the top. I also added a bottom and middle drawer option. One with a demon face and the other is plain stone. There is also a bottom and middle shelf option with a slight slant. You can mix and match shelves and drawers to make it the way you like.A link to the original file is at the bottom.
https://www.drivethrurpg.com/product/251695/DRAGONLOCK-Ultimate-GM-Screen-of-DOOM?src=hottest_filtered... [click here for more] |
Fat Dragon Games |
$2.99
|
Switchable, LED-compatible dice tower bottom, compatible with the GM Screen of Doom by Fat Dragon Games.
These remixed pieces replace the rear component of the dice tower bottom assembly. They feature a hole suitable for mounting a 5 mm LED away from the impact zone of falling dice, a recess large enough for a 2x AAA battery pack, a hole for mounting a push-button switch and channels for running... [click here for more] |
Fat Dragon Games |
FREE
|
This is a new demon head base for the dice tower as part of the GM screen of doom by Fat Dragon Games. It allows you to have a dice tower facing out and one dice tower facing in, while still keeping the symmetry of having both demon heads on the outside of the wall/GM screen.
File is split into two pieces for easy no support printing just like the original demon head. ... [click here for more] |
Fat Dragon Games |
$3.99
|
Expand your GM Screen with this remixed skull dice tray.
This set would not have been possible without the work of Peter Kirylo, Sr. He will share in the royalties for this set, as he is due for his wonderful circle tray model I needed to craft it. I look forward to working with him again to bring great models to this community.
Printing instructions:
6 top layers minimum suggested for this model.... [click here for more] |
Fat Dragon Games |
$1.99
|
A modification to the GM screen of Doom that lets you have top drawers.
The Base piece has a custom clip for the bottom, I do advice to glue that.
The top comes either in one part that needs supports or 2 parts that need to be glued together that are supportless, An alignment peg is included.
7 drawers with the dice names are also included
You will need a copy of the GM screen of Doom to use these... [click here for more] |
Fat Dragon Games |
$3.99
|
Wall angle adaptor tops with initiative tracker slots, compatible with the GM Screen of Doom by Fat Dragon Games.
These remixed pieces will allow you to track initiative around angled walls, or make better use of blank wall space on the GM side to hang info using tracker binder clips.
Compatibility info:
To make use of these remixed pieces, you will need to own the GM Screen of Doom. It's terrific!... [click here for more] |
Fat Dragon Games |
FREE
|
The FDG Village 4x4 street tiles, gridded upon request for the FDG Facebook Community. A special thanks the Raphael Fellipe for his help test printing. Includes 9 4x4 tiles from the Village Streets.
... [click here for more] |
Fat Dragon Games |
$3.00
|
This set includes three sizes of clip-on walls (plus two reversed from side to side). With these five models, you can clip walls to the outside of any Fat Dragon Games dungeon floor tiles (including corners and intersections), allowing you to use the full floor space. For instance, you can create a corridor a full tile wide (2" wide), a room with exactly 4" or 6" of floor space, or other similar... [click here for more] |
Fat Dragon Games |
$2.99
|
Here's a micro Ghost, just in time for Halloween! Scaled to be used with the Micro Dungeons set. Should print without supports.
Print using FDG Cura mini settings, or equivalent.
Also includes a scaled up 32 mm version... if for some reason you wanted to print him that big.
Remember to use your clips on their sides for the Micro Dungeons, the side of the tile should look like it has a duck mouth... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
It's not just for the Sinister Secret of Saltmarsh... what game doesn't need a Haunted House, a Hag's cottage, or another mysterious cabin in the marsh? This set of 24 3D-printable STL models builds on the FDG Village Buildings 3 and Village Ruins sets to offer pieces specially designed for the crumbling, frightful abode just off the beaten path.
Included Models:
Recommended Print Settings:
Layer... [click here for more] |
Fat Dragon Games |
$9.99
|
A haunted house deserves an interesting interior… after all, witches and hags leave their mark. Whether in the basement or locked away in a back room, these 3D-printable STL files will give some spirit to your haunted house!
Recommended Print Settings:
Layer Size: 0.15mm, or 0.1mm for finer detail
Infill: 15% for all models recommended, 5% minimum
Top/Bottom... [click here for more] |
Fat Dragon Games |
$7.99
|
Included are seven Eight 3d models in .stl format of Herrinbone Brick dungeon and village street tiles. These tiles print great with layer height at .2 or less. A wonderful addition to any village, town, or city encounter. Two of the old legacy "Long Brick" are also included, but not shown on the cover.
Tiles are mounted to Fat Dragon Games Dragonlock tile system bases. ... [click here for more] |
Fat Dragon Games |
$2.00
|
Everything you need to build basic hex dungeons. 26 new models using the Fat Dragon Dungeon walls on Hex Bases. Either put these together with the included pegs, or use the modified Dragonbite Clips (also included) for a tighter fit.
Pieces include;
Left Corner
Right Corner
T-wall
T-wall with right or left corners on the opposite end
Three door frames
Twelve Different Floor Shapes
Three... [click here for more] |
Fat Dragon Games |
$9.99
|
This expansion includes newly mixed Fat Dragon Games models on hex bases to compliment the Hex Dungeon Starter Set.
... [click here for more] |
Fat Dragon Games |
$7.95
|
Fat Dragon Games' 3D printable mini painting holders are great — but they don't grip hex-base minis, or the circular Heroforge bases, as well as they could. This set of alternate slider models is compatible with the standard FDG mini painting handles, but gives a bit of extra grip.
Slider-grips for 1", 1.5", and 2" minis are included. This product requires the handle and base models from Fat Dragon... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Looking to create that grand staircase to the next level or an even taller dias for your next adventure? Look no futher, included in this set you'll find remixed STL files that add a second tier to the Dungeon Delve 2 dias stairs. I've also included some other remixes I made for my own adventure that you might find useful.
Coming Soon: I am still working on the second tier round corner stairs which... [click here for more] |
Fat Dragon Games |
$3.00
|
These tiles were requested by Joe Paddock. Set includes 9 4x4 sewer tiles to make wider sewers
Update: at Joe's request, I have added 8 more tiles to the set and a sewer grate. Added a T section, 2x4 straight, 5 different ends and a wide to 2 narrow tile
Update #2: added 6 more tiles with drains
Dragonbite clips can be found here:
www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20... [click here for more] |
Fat Dragon Games |
$4.99
|
Curved wall with castle floor. Done at Julie Hanson's request. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Log In 
