Close
Close
Narrow Results
 Follow Your Favorites!
NotificationsSign in to get custom notifications of new products!













GenreFormatPublisher
Historical   Remove Search Term
PDF   Remove Search Term
Dave Graffam Models   Remove Search Term
Advanced Search

 
 Hottest Historical, PDF from Dave Graffam Models
 
 Newest Titles in This Section
Products found in this section... Sort by: 
 Title    Publisher    Price  
Budget Bundle

Budget Bundle


This bundle includes a selection of 35 of my fantasy/medieval themed single-layered models in 28mm/30mm scale. Up until now, there was no other way to get a hold of these models without going in for a whole multi-layered kit. With this bundle, you get 35 single-layered models for less than $1 each. They're ready to print right away, without involving any extra skins or textures. A great choice for...   [click here for more]
Dave Graffam Models  $29.95

Add to DriveThruRPG.com Order  
Rakes Corner [BUNDLE]

Rakes Corner [BUNDLE]


This special bundle product contains the following titles. Apothecary of Rake's Corner Paper Model Regular price: $1.00 Bundle price: $1.00 Format: Watermarked PDF This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting...   [click here for more]
Dave Graffam Models  $16.00

Add to DriveThruRPG.com Order  
East Gate Paper Model

East Gate Paper Model


This paper model is easy to assemble, requiring just cardstock sheets to print on (110# or 199gsm cardstock recommended), scissors, hobby knife and ordinary glue. Included are tips and advice for printing at various popular gaming and model railroad scales. One of the great things about papercraft models is that they can be printed at any popular gaming scale quite easily, so this model can be...   [click here for more]
Dave Graffam Models  $4.95

Add to DriveThruRPG.com Order  
Lumber, Logs & Hay Bales Paper Models

Lumber, Logs & Hay Bales Paper Models


This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is just a few minutes per log, lumber stack or hay bale. These models are designed at the popular 28mm-30mm gaming scale, but if you are very meticulous you can shrink them down to...   [click here for more]
Dave Graffam Models  $1.95

Add to DriveThruRPG.com Order  
Apothecary of Rake's Corner Paper Model

Apothecary of Rake's Corner Paper Model


This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is under an hour. This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on...   [click here for more]
Dave Graffam Models  $2.95

Add to DriveThruRPG.com Order  
Asylum of Rake's Corner

Asylum of Rake's Corner


This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour. This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on...   [click here for more]
Dave Graffam Models  $2.95

Add to DriveThruRPG.com Order  
Clock of Rake's Corner Paper Model

Clock of Rake's Corner Paper Model


This paper model kit is easy to assemble, requiring just 13 cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. Optionally, you may use a piece of foamcore cut to 6" x 9" for the ground piece. This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or...   [click here for more]
Dave Graffam Models  $3.95

Add to DriveThruRPG.com Order  
Cottage of Rake's Corner

Cottage of Rake's Corner


This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour. This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on...   [click here for more]
Dave Graffam Models  $2.95

Add to DriveThruRPG.com Order  
Crane House of Rake's Corner Paper Model

Crane House of Rake's Corner Paper Model


A crane house like this is useful in any harbor, and might be the property of a merchant at their private pier or warehouse. It might be owned by a town or individual offering its services to the public, charging a small fee for every hoist. Such a structure would also be vital in an exchange market where bulk goods are being traded, where large freight needs to be moved from one wagon to...   [click here for more]
Dave Graffam Models  $2.95

Add to DriveThruRPG.com Order  
Fletcher of Rake's Corner Paper Model

Fletcher of Rake's Corner Paper Model


This paper model kit is easy to assemble, requiring just 5 cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. Optionally, you can use a piece of foamcore for the base. This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the...   [click here for more]
Dave Graffam Models  $2.95

Add to DriveThruRPG.com Order  
Library of Rake's Corner Paper Model

Library of Rake's Corner Paper Model


This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. Optionally, you can use a piece of foamcore for the base. A fine-line ink marker is recommended for darkening the paper edges, and foamcore is recommended for the ground piece, and a few other common...   [click here for more]
Dave Graffam Models  $4.95

Add to DriveThruRPG.com Order  
Scribe of Rake's Corner Paper Model

Scribe of Rake's Corner Paper Model


This paper model kit is easy to assemble, requiring just 5 cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. Optionally, you can use a piece of foamcore for the base. This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the...   [click here for more]
Dave Graffam Models  $2.95

Add to DriveThruRPG.com Order  
Walls of Rake's Corner

Walls of Rake's Corner


This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on your printer. Tips and advice...   [click here for more]
Dave Graffam Models  $2.95

Add to DriveThruRPG.com Order  
Warehouse of Rake's Corner

Warehouse of Rake's Corner


This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about half an hour. This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage...   [click here for more]
Dave Graffam Models  $2.95

Add to DriveThruRPG.com Order  
Clock Tower #2 Paper Model

Clock Tower #2 Paper Model


This paper model kit is easy to assemble, requiring just 13 cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. Optionally, you may use a piece of foamcore cut to 6" x 9" for the ground piece. This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or...   [click here for more]
Dave Graffam Models  $4.95

Add to DriveThruRPG.com Order  
Cobblestones Tile Kit #1

Cobblestones Tile Kit #1


This paper tile set is easy to create, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, aluminum ruler and cutting mat. For sturdier tiles, use foamcore and spray glue. These tiles are designed with a 1" grid to be used at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting...   [click here for more]
Dave Graffam Models  $2.95

Add to DriveThruRPG.com Order  
Country Brewery Paper Model

Country Brewery Paper Model


This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. It may look complicated, but every part of the Country Brewery is simple to assemble on its own, and putting it together is just a matter of building up the simple shapes into the complete structure you...   [click here for more]
Dave Graffam Models  $6.95

Add to DriveThruRPG.com Order  
Crosspiece Fences Paper Models

Crosspiece Fences Paper Models


This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. This paper terrain is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on your printer. Tips and...   [click here for more]
Dave Graffam Models  $0.95

Add to DriveThruRPG.com Order  
Fletcher's Shop Paper Model

Fletcher's Shop Paper Model


This paper model kit is easy to assemble, requiring just 5 cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat.Optionally, you may also use a piece of foamcore for the base, and make use of other common hobby tools for even better results. Full instructions are included. This model is designed at the popular...   [click here for more]
Dave Graffam Models  $3.95

Add to DriveThruRPG.com Order  
Friediger House Paper Model Kit

Friediger House Paper Model Kit


This paper model kit is easy to assemble, requiring 14 cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. Step by step instructions are included. This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage...   [click here for more]
Dave Graffam Models  $4.95

Add to DriveThruRPG.com Order  
Inventor's House Paper Model

Inventor's House Paper Model


This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. It may look complicated, but every part of the Inventor's House is simple to assemble on its own, and putting it together is just a matter of building up the simple shapes into the complete structure...   [click here for more]
Dave Graffam Models  $5.95

Add to DriveThruRPG.com Order  
Livestock Shelter Paper Model

Livestock Shelter Paper Model


This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on your printer. Tips and advice for altering...   [click here for more]
Dave Graffam Models  $2.95

Add to DriveThruRPG.com Order  
Medieval Ground Tiles

Medieval Ground Tiles


This paper tiles set is easy to create, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, aluminum ruler and cutting mat. These tiles are designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on your printer. Tips and advice for altering...   [click here for more]
Dave Graffam Models  $4.95

Add to DriveThruRPG.com Order  
Mermaid Tavern Paper Model

Mermaid Tavern Paper Model


This paper model kit is easy to assemble, requiring just 6 or 7 cardstock paper sheets to print on (110 lb. or 199gsm matte stock recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. For better results, a foamcore base can be used. This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting...   [click here for more]
Dave Graffam Models  $4.95

Add to DriveThruRPG.com Order  
Outbuildings Paper Models Set

Outbuildings Paper Models Set


This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour for the whole set. This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print...   [click here for more]
Dave Graffam Models  $2.95

Add to DriveThruRPG.com Order  
Pavers Tile Kit #1

Pavers Tile Kit #1


This paper tile set is easy to create, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, aluminum ruler and cutting mat. For sturdier tiles, use foamcore and spray glue. These tiles are designed with a 1" grid to be used at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting...   [click here for more]
Dave Graffam Models  $2.95

Add to DriveThruRPG.com Order  
Pavers Tile Kit #2

Pavers Tile Kit #2


This paper tile set is easy to create, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, aluminum ruler and cutting mat. For sturdier tiles, use foamcore and spray glue. These tiles are designed with a 1" grid to be used at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting...   [click here for more]
Dave Graffam Models  $2.95

Add to DriveThruRPG.com Order  
Pavers Tile Kit #3

Pavers Tile Kit #3


This paper tile set is easy to create, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, aluminum ruler and cutting mat. For sturdier tiles, use foamcore and spray glue. These tiles are designed with a 1" grid to be used at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting...   [click here for more]
Dave Graffam Models  $2.95

Add to DriveThruRPG.com Order  
Potter's Shop Paper Model

Potter's Shop Paper Model


This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour. This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on...   [click here for more]
Dave Graffam Models  $1.95

Add to DriveThruRPG.com Order  
Pump House Paper Model

Pump House Paper Model


This paper model kit is easy to assemble, requiring just 1 cardstock paper sheet to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on your printer. Tips and advice for...   [click here for more]
Dave Graffam Models  $0.95

Add to DriveThruRPG.com Order  
Quaint House Paper Model

Quaint House Paper Model


This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about half an hour. This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage...   [click here for more]
Dave Graffam Models  $2.95

Add to DriveThruRPG.com Order  
Stone Tile Kit #3

Stone Tile Kit #3


This paper tile set is easy to create, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, aluminum ruler and cutting mat. For sturdier tiles, use foamcore and spray glue. These tiles are designed with a 1" grid to be used at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting...   [click here for more]
Dave Graffam Models  $1.95

Add to DriveThruRPG.com Order  
Storehouse Paper Model

Storehouse Paper Model


This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour. This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on...   [click here for more]
Dave Graffam Models  $1.95

Add to DriveThruRPG.com Order  
Tax Collector's Office Paper Model

Tax Collector's Office Paper Model


This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour. This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on...   [click here for more]
Dave Graffam Models  $1.95

Add to DriveThruRPG.com Order  
Thatched Cottage Paper Model

Thatched Cottage Paper Model


This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour. This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on...   [click here for more]
Dave Graffam Models  $2.95

Add to DriveThruRPG.com Order  
Tool Shed Paper Model

Tool Shed Paper Model


This paper model kit is easy to assemble, requiring just 3 cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on your printer. Tips and advice for...   [click here for more]
Dave Graffam Models  $1.95

Add to DriveThruRPG.com Order  
Tudor House #3 Paper Model

Tudor House #3 Paper Model


This paper model kit is easy to assemble, requiring just 12 cardstock paper sheets to print on (110 lb. or 199gsm recommended), hobby knife, glue, metal ruler and cutting mat. This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on your printer. Tips and advice for altering the...   [click here for more]
Dave Graffam Models  $4.95

Add to DriveThruRPG.com Order  
Tudor House Paper Model

Tudor House Paper Model


This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour. This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on...   [click here for more]
Dave Graffam Models  $1.95

Add to DriveThruRPG.com Order  
Tudor Restaurant Paper Model

Tudor Restaurant Paper Model


This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour. This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on...   [click here for more]
Dave Graffam Models  $1.95

Add to DriveThruRPG.com Order  
Tudor Shop Paper Model

Tudor Shop Paper Model


This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour. This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on...   [click here for more]
Dave Graffam Models  $1.95

Add to DriveThruRPG.com Order  
Watch Tower Papercraft Model

Watch Tower Papercraft Model


This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. It may look complicated, but every part of the Watch Tower is simple to assemble on its own, and putting it together is just a matter of building up the simple shapes into the complete structure you...   [click here for more]
Dave Graffam Models  $4.95

Add to DriveThruRPG.com Order  
Frontier Barn Paper Model

Frontier Barn Paper Model


This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Optionally, you may also use foamcore. This paper terrain is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage...   [click here for more]
Dave Graffam Models  $3.95

Add to DriveThruRPG.com Order  
Frontier House Winter Edition Paper Model

Frontier House Winter Edition Paper Model


This paper model kit is easy to assemble, requiring just 4 to 5 cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour. This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage...   [click here for more]
Dave Graffam Models  $3.95

Add to DriveThruRPG.com Order  
Saltbox House #1 Paper Model

Saltbox House #1 Paper Model


This paper model kit is easy to assemble, requiring just 6 cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. Optionally, you may use a piece of foamcore cut to 6" x 9" for the ground piece. This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm...   [click here for more]
Dave Graffam Models  $2.95

Add to DriveThruRPG.com Order  
Saltbox House #2 Paper Model

Saltbox House #2 Paper Model


This paper model kit is easy to assemble, requiring just 6 cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. Optionally, you may use a piece of foamcore cut to 6" x 9" for the ground piece. This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm...   [click here for more]
Dave Graffam Models  $2.95

Add to DriveThruRPG.com Order  
Crosspiece Low Ruins Paper Models

Crosspiece Low Ruins Paper Models


This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. This paper terrain is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on your printer. Tips and...   [click here for more]
Dave Graffam Models  $2.95

Add to DriveThruRPG.com Order  
Crosspiece Ruins Set #3 Paper Models

Crosspiece Ruins Set #3 Paper Models


This paper terrain kit is easy to assemble, requiring just 6 cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. Optionally, you may make use of other common hobby tools for even better results. Full instructions are included. This model is designed at the 28mm gaming scale, and can be easily scaled down...   [click here for more]
Dave Graffam Models  $2.95

Add to DriveThruRPG.com Order  
World War Ruins #3 Paper Model

World War Ruins #3 Paper Model


This paper model kit is easy to assemble, requiring just 7 cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on your printer. Tips and advice for...   [click here for more]
Dave Graffam Models  $3.95

Add to DriveThruRPG.com Order  
World War Ruins #4 Paper Model

World War Ruins #4 Paper Model


This paper model kit is easy to assemble, requiring just 5 cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on your printer. Tips and advice for...   [click here for more]
Dave Graffam Models  $2.95

Add to DriveThruRPG.com Order  
Command Tent Paper Model

Command Tent Paper Model


This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on your printer. Tips and advice for altering...   [click here for more]
Dave Graffam Models  $0.95

Add to DriveThruRPG.com Order  
Displaying 1 to 50 (of 51 items) Result Pages:  1  2  [Next >>] 
Select Page Number