Close
Close
Narrow Results
 Follow Your Favorites!
NotificationsSign in to get custom notifications of new products!











FormatPublisher
STL (3D Model)   Remove Search Term
DungeonPrint   Remove Search Term
Advanced Search >

 
 Hottest STL (3D Model) from DungeonPrint
 
 Newest Titles in This Section
Products found in this section... Sort by: 
 Title    Publisher    Price  
Aztlan 1

Aztlan 1


Aztlan - A Mesoamerican tileset ordered for construction by the DungeonPrint Community in March 2018. This set includes the starter models you’ll need for Aztlan rooms, as well as a grand temple entrance. It is compatible with all other DragonlockTM models. The set includes: The grant temple entrance A doorway with four door designs and a bar the door rotates on Three floors Five walls Rounded...   [click here for more]
DungeonPrint  $4.99

Add to DriveThruRPG.com Order  
Bloody Reef

Bloody Reef


Finish off your harbor with this selection of 7 models including five giant rock formations in the water, an ominous dorsal fin, and Sharky McSharkFace himself! Models are delivered in STL format and DragonbiteTM-compatible. Recommended Print Settings: Layer Size: 0.15mm, or 0.10mm for smoother features Infill: 10% recommended Top/Bottom Layers:...   [click here for more]
DungeonPrint  $2.99 $2.06

Add to DriveThruRPG.com Order  
Countryside

Countryside


Includes 5 styles each of Asteroid, Rough Dirt, Uneven Ground, and Snowy Drift terrain. Each style is available with and without grid marks. There are a total of 40 STL files that are all DragonbiteTM compatible. A special note of attribution: These tiles use the very wonderful rocks released by Terrain4Print under CC-AO. Recommended Print Settings: Layer Size: 0.15mm, or...   [click here for more]
DungeonPrint  $9.99

Add to DriveThruRPG.com Order  
Cracked Marble Floors

Cracked Marble Floors


This set of 3D-printable STL files, Cracked Marble Floors, came from a request on the Fat Dragon Games Forums. I didn’t think it would work, but it did. I tried to think of a walls set that would fill out the set, but I couldn’t find the the right fit. So, here is a big set of floors; see the related sets below for some clip-on walls that will work well with them. Recommended Print...   [click here for more]
DungeonPrint  Pay What You Want

Add to DriveThruRPG.com Order  
Dockyards: Boardwalk

Dockyards: Boardwalk


One of the Dockyards series, this set includes 16 DragonbiteTM-compatible STLs files for a variety of boardwalks and low stone piers. In combination with the other Dockyards sets, you can create an entire port area for your games! Recommended Print Settings: Layer Size: 0.15mm, or 0.10mm for smoother features Infill: 10% recommended Top/Bottom Layers:...   [click here for more]
DungeonPrint  $8.99

Add to DriveThruRPG.com Order  
Dockyards: Low Docks

Dockyards: Low Docks


One of the Dockyards series, this set includes 18 DragonbiteTM-compatible STLs files for a variety of low docks. In combination with the other Dockyards sets, you can create an entire port area for your games! Recommended Print Settings: Layer Size: 0.15mm, or 0.10mm for smoother features Infill: 10% recommended Top/Bottom Layers: 6 (or 0.9mm...   [click here for more]
DungeonPrint  $9.99

Add to DriveThruRPG.com Order  
Dockyards: Stone Piers

Dockyards: Stone Piers


One of the Dockyards series, this set includes 18 DragonbiteTM-compatible STLs files for a variety of stone piers. In combination with the other Dockyards sets, you can create an entire port area for your games! Recommended Print Settings: Layer Size: 0.15mm, or 0.10mm for smoother features Infill: 10% recommended Top/Bottom Layers: 6 (or...   [click here for more]
DungeonPrint  $10.99

Add to DriveThruRPG.com Order  
Dockyards: Water & Wood

Dockyards: Water & Wood


One of the Dockyards series, this set includes 11 DragonbiteTM-compatible STL files for a the water around the docks and some dressing to put on the docks. In combination with the other Dockyards sets, you can create an entire port area for your games! Recommended Print Settings: Layer Size: 0.15mm, or 0.10mm for smoother features Infill: 10% recommended Top/Bottom...   [click here for more]
DungeonPrint  $4.99

Add to DriveThruRPG.com Order  
Dockyards: Wood Piers

Dockyards: Wood Piers


One of the Dockyards series, this set includes 13 DragonbiteTM-compatible STLs files that assemble into 10 different pieces for a variety of elevated wood piers. In combination with the other Dockyards sets, you can create an entire port area for your games! Note that the wood piers extending over water print in multiple parts and must be snapped or clipped together; instructions and pictures are...   [click here for more]
DungeonPrint  $7.99

Add to DriveThruRPG.com Order  
DungeonPrint Halloween

DungeonPrint Halloween


Is it that time of year already? Thrill your players with this Spooktacular set of 3D-printable terrain, including a crypt, numerous graves and gravestones, and a pumpkin patch -- including the Great Pumpkin himself! This set includes more than 40 STLs in all, compatible with all DragonbiteTM terrain. Recommended Print Settings: Layer Size: 0.15mm,...   [click here for more]
DungeonPrint  $12.99 $10.31

Add to DriveThruRPG.com Order  
Konga Rising

Konga Rising


This set of printable terrain STLs is the start of a new style of jungle walls and buildings, with a very special dungeon entrance piece! It was the July 2018 DungeonPrint Community Choice selection. Included pieces: Recommended Print Settings: Layer Size: 0.15mm, or 0.1mm for finer detail Infill: 10% for all models recommended Top/Bottom...   [click here for more]
DungeonPrint  $9.99

Add to DriveThruRPG.com Order  
Konga Sacrifice

Konga Sacrifice


This set of 3D printable terrain augments the Konga Rising terrain with a new set piece -- a large 6x6" sacrificial rock. There are versions with a DragonbiteTM base and without (in case you want to lay it on top of existing terrain), as well as a bonus 6x6" dirt tile. NOTE: your printer must have at least a 6"x6" print area to print these pieces! Recommended Print Settings:...   [click here for more]
DungeonPrint  $3.99

Add to DriveThruRPG.com Order  
Peaceful Fountains

Peaceful Fountains


This set is a companion to Peaceful Gardens, the May 2018 DungeonPrint Community Choice set. It includes three large fountains, as pictured on the product cover and in the following 3D view: Fountain Display 2 by zergchops on Sketchfab RECOMMENDED PRINT SETTINGS Layer Size: 0.15mm recommended, 0.1mm for smoother features Infill: 10% recommended Top/Bottom...   [click here for more]
DungeonPrint  $2.99

Add to DriveThruRPG.com Order  
Peaceful Gardens

Peaceful Gardens


This set includes several types of models to populate your peaceful gardens -- planters, trees, a pond with two styles of bridge, and large stone pathways. The center of the bridge prints in two parts, and you should glue the two parts together. RECOMMENDED PRINT SETTINGS Layer Size: 0.15mm recommended, 0.1mm for smoother features Infill: 10% for all models...   [click here for more]
DungeonPrint  $9.99

Add to DriveThruRPG.com Order  
Rowboat

Rowboat


This set of 3d-printable STLs lets you print fantasy rowboats, with or without front-mounted hanging lanterns (and with or without nets and barnacles for decoration). The cover photo shows a painted version of the rowboat with lantern. If you'd like a bigger or smaller boat, the rowboat, lantern, and oar models can be scaled accordingly. Recommended Print Settings: Layer...   [click here for more]
DungeonPrint  $3.99

Add to DriveThruRPG.com Order  
Tile Risers for Dragonbite

Tile Risers for Dragonbite


These risers use Fat Dragon Games DragonbiteTM clip-together bases, and support the bottom of an upper layer of Dragonbite tiles. They come in a variety of heights to allow you to position the upper level exactly where you want. The logic behind the various sizes is: Elevated/Dais 27.7mm: If you put a floor on top of this, the surface of the floor will be roughly level with the...   [click here for more]
DungeonPrint  $0.99

Add to DriveThruRPG.com Order  
Displaying 1 to 16 (of 16 items) Result Pages:  1 
Select Page Number