Title |
Publisher |
Price |
This 3D print product lets you print 1 highly detailed, 32mm scale multipart miniature of Khan Noonien Singh for use with the Star Trek Adventures tabletop roleplaying game. Please note this is an alternate pose. Khan is also available to print at home in a standard pose product available separately. Other iconic Star Trek villains are also available individually or as part of the Star... [click here for more] |
Modiphius |
$5.00
|
This 3D print product lets you print 1 highly detailed, 32mm scale multipart miniature of Locutus of Borg for use with the Star Trek Adventures tabletop roleplaying game. Please note this is an alternate pose. Locutus is also available to print at home in a standard pose product available separately. Other iconic Star Trek villains are also available individually or as part of the Star... [click here for more] |
Modiphius |
$5.00
|
TINY, CUTE and DURABLE!
Store your characters in same pouch with dices.
Designed to print with NO SUPPORTS, NO CLEANUP!
The miniature represents a hero from "Four Against Darkness" game.
Hire this and other characters to your party, print their HERO CARDS:
It is a series of STL minis sculpted to be one of a kind PCs for your RPG campaigns.
More iconic fantasy... [click here for more] |
Alexey Aparin |
Pay What You Want
|
Included in this title are 12 remixed tiles for Fat Dragon Games Caverns Terrain.
4x4 Elevated Cavern Floor
4x4 Crater
4x4 Elevated Crater
4x4 Elevevated Water Hole 1
4x4 Elevevated Water Hole 2 With Ledged Rock
4x4 Elevevated Water Hole 1
4x4 Elevevated Water Hole 2 With Formation Rock
4x4 Water tile with Rock Formation
4x4 Water Tile with Ledged Rock
4x4 Water Tile with Rock Hut Bottom... [click here for more] |
Fat Dragon Games |
$2.00
|
This set includes 25 dungeon-themed ruined tiles from the fan-created section of the Fat Dragon Games forums. The tiles include:
2 ruined corners (each with both orientations)
Ruined wall-and-post (both orientations)
Ruined wall
Ruined wall on ruined floor (both orientations)
2 ruined floors with cavern post (each with both orientations)
11 various ruined floors
A rubble-choked corridor (intended... [click here for more] |
Fat Dragon Games |
$7.99
|
Contains: Tower set Gatehouse Optional rubble wall segment for framing up the start of the adventure area Extremely modular bridge set (with broken ends, raised options, and width/length all adjustable) Bridge arch entry with optional stone ground base
Also includes Vulture and goat demon. All miniatures have both integrated and separated from base options, as well as a resin pre-supported option!... [click here for more] |
Dragon Workshop |
$18.00 $10.80
|
DRAGONLOCK™ is an interlocking terrain system that allows you to create fully modular, multi-level 28mm scale dungeon terrain for your RPG or wargame on your home 3D printer. Individual pieces links to neighboring pieces with our exclusive Dragonbite™ clips. Each set is delivered as a downloadable .stl file, and once you have the set, you can print as many pieces as you like and... [click here for more] |
Fat Dragon Games |
$9.99 $7.49
|
TINY, CUTE and DURABLE!
Store your characters in same pouch with dices.
Designed to print with NO SUPPORTS, NO CLEANUP!
The miniature represents a hero from "Four Against Darkness" game.
Hire this and other characters to your party, print their HERO CARDS:
It is a series of STL minis sculpted to be one of a kind PCs for your RPG campaigns.
More iconic fantasy... [click here for more] |
Alexey Aparin |
Pay What You Want
|
Included in this set are 34 STL files corresponding to the status effects of the 5th Edition Dungeons and Dragons game.
Advantage, Charmed, Disadvantage, Deafened, Fatigued, Frightened, Grappled, Incapacitated, Invisible, Paralyzed, Petrified, Poisoned, Prone, Restrained, Stunned, Unconscious, Exhuasted Dying, Stabilized, Save, Fail, Misfire, and Concentrating are included. Flying 5, 10, 15, 20,... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
It's about giant buildings folks. That's what it really comes down to. That's all that's left when we go to see our ancestors. The Busy Little Dwarves Design Bureau understands the need to work hard today to ensure a better tomorrow for our little ones. After all, what do we really leave behind for our children but unnecessarily tall structures with incredible, intricate, and impractical architecture.... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Friend, where will you and your loved ones be when the bombs fall? Secure their future the way you want with a state-of-the-art underground vault from Vault-Tec!
You have been chosen as the designer of this critical structure, and with this upgrade pack you’ll have all you need to expand your vault with new options for ballustrades and stairs which build on the existingVault... [click here for more] |
Modiphius |
$15.00
|
These 2x2 risers are designed to support the 4x4 Woodland and Riverside sets, including the new Riverside Waterfalls Set. Some of the cliffs and falls have unique heights. This set should provide proper support with any combination. These risers should support most FDG 4x4 tiles.
See Preview Here:
Recommended Print Settings are .2mm layer height and 10% infill, using the FDG terrain profile.
Cheers!... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Included in this set are 9 custom remixed tiles combining elements from Fat Dragon Games Starter set, Expansion 9, and Villiage 1 set. These doors were requested by my friend @ammulder on the FDG Forums for use as "secret" doors that are clearly visible from one side. They are free to the community in celebration of Fat Dragon Games Kickstarter 3.
Each door tile prints in one solid piece and will... [click here for more] |
Fat Dragon Games |
$0.99
|
Add the ever-popular Intermodal Shipping Container to your tabletop scenery with Nerdhaus Industry's 3D printable starter pack. It includes everything you need to build 10, 20, 40, and even 60ft shipping containers for heroic-scale tabletop games in modern, sci-fi, and post-apocalyptic settings.
Assemble individual containers for use as scatter terrain, stack them to build a wasteland fortress of... [click here for more] |
Nerdhaus Industries |
$9.99
|
Choice Caverns includes 4 new 2x2 remixed cavern tiles and 1 oversized 4x6 Cavern Chasm. I made each of these for my patrons in October 2018, so it seems fitting to call them Choice. These were remixed from the Fat Dragon Games Revised Caverns terrain set. ... [click here for more] |
Fat Dragon Games |
$2.99
|
Friend, where will you and your loved ones be when the bombs fall? Secure their future the way you want with a state-of-the-art underground vault from Vault-Tec!
You have been chosen as the designer of this critical structure, and with the Vault Walls Upgrade Pack you’ll have all you need to expand your vault with new options for walls and scenery which build on the existing... [click here for more] |
Modiphius |
$15.00
|
Included in this set are 4 new FDG remixes allowing for more complex room designs. The Curved T-Wall comes in 4 flavors: Vanilla, Torch, Ruins, and Dank Catacombs.
... [click here for more] |
Fat Dragon Games |
$1.99
|
You get the 5 models in the pictures.
dice tray - cthulhu.stl oracle dice stand.stl skull master screen l.stl skull master screen r.stl skull master screen wings.stl skull phone stand.stl wizard dice tower.stl
This is part of a successful kickstarter campaign. STL 3D printable collection for RPG & DND games, includes character dice boxes, master screen, phone stand, dice tray and more. Please... [click here for more] |
madchest |
$9.99
|
This is part of a successful kickstarter campaign. STL 3D printable collection for RPG & DND games, includes character dice boxes, master screen, phone stand, dice tray and more. Please follow and support us, thank you! ... [click here for more] |
madchest |
$0.99
|
This is a remix of the dice tower from the GM Screen Of Doom. I added a cup/pen or pencil holder to the top. I also added a bottom and middle drawer option. One with a demon face and the other is plain stone. There is also a bottom and middle shelf option with a slight slant. You can mix and match shelves and drawers to make it the way you like.A link to the original file is at the bottom.
https://www.drivethrurpg.com/product/251695/DRAGONLOCK-Ultimate-GM-Screen-of-DOOM?src=hottest_filtered... [click here for more] |
Fat Dragon Games |
$2.99
|
Part two of the Abbey- The mid tier- which while optional, adds a lot to the visual impact; Containing:
41 Mid Wall components for building and customizing the Abbey. Using the same framework started with the Toy Makers Shop
Undead Bride: 2 poses, with resin presupported files
The Abbot: Two hat options;with resin presupported files
The Abbot transformed: With resin presupported files
These... [click here for more] |
Dragon Workshop |
$11.00
|
Need a balcony for your BBEG to monologue from? Does Count Strahd need a place to greet his future victims? Or does your castle need a grand entrance? This set of 3D-printable STL models provides the stairs, railings, and balconies you need to build all these and more.
Among the 33 pieces in this set, you'll find:
Balcony floors, walls with balcony floors, and corners with balcony floors,... [click here for more] |
Fat Dragon Games |
$14.99
|
TINY, CUTE and DURABLE!
Store your characters in same pouch with dices.
It is a series of STL minis sculpted to be one of a kind PCs for your RPG campaigns.
More iconic fantasy heroes are available HERE:
... [click here for more] |
Alexey Aparin |
Pay What You Want
|
TINY, CUTE and DURABLE!
Store your characters in same pouch with dices.
It is a series of STL minis sculpted to be one of a kind PCs for your RPG campaigns.
More iconic fantasy heroes are available HERE:
... [click here for more] |
Alexey Aparin |
Pay What You Want
|
Included in this free set are 6 models for secret rotating doors. The original rotating cavern door was included in the Centurion set, but with the release of the revised Cavern set from Fat Dragon Games, it seemed fitting to release a new version and update to the legacy. This rotating door rotates on the side rather than the middle.The Tavern tile rotates from the middle.
It is recommend to use... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
If you have Fat Dragon Games Village sets and you need to make REALLY BIG room areas then these are the solution for you!
These double pillars allow you to use D-Walls to run walls along two 4"x4" using adjacent pillar holes (just as C-Walls do). The pillars have double prongs that are inserted into corresponding corners of adjoining tiles as shown in the image.
The Stone pillar projects assymetrically... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Here are some basic cavern edges. They are short enough for overlapping cavern levels. Check out the preview below and enjoy!
Set Preview:
:lang="en">Cavern Edges Set
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well. Cheers! ... [click here for more] |
Fat Dragon Games |
$1.99
|
This product contains one skill die and one stress die in .stl format, prepared and scaled for 3D printing. The skill die is marked with a NATO symbol on one side, for rolling a success. The stress die is marked with a NATO symbol for success and a trashcan denoting a bane on the opposite side. Both dice are marked with a 2, for use with the story point rules. You will need access to a 3D printer... [click here for more] |
Twin Engine Publishing |
$4.50
|
This set is for those in the Facebook Group that asked for Wrap around Porches/Balconies
The set comes in 3 different styles and all have railings for each section with corner sections needing 2 corner railings to complete.
there is 25 items in this set, update: added extended bumpout with roof, 2 versions of chairs one will need a piece of cloth to be added (caution chairs are very small and... [click here for more] |
Fat Dragon Games |
$3.00
|
Complete collection of 3 and 4 inch rooftops from Village Timber set. Cover photo courtesy of Tim Thorpe, who also inspired the need for this set. ... [click here for more] |
Fat Dragon Games |
$4.99
|
3D printable STL files for a Tavern from the Denizens of Fantasy range.
Set includes a one-piece model for rescaling purposes.
Set also includes bar furniture ... [click here for more] |
Dark Realms |
$15.95 $13.95
|
Part one of the Abbey- Containing:
150 components for building and customizing the Abbey. Using the same framework started with the Toy Makers Shop
Mongrelfolk: 2, with resin presupported options
Two sets of chickens
Opening doors, shutters, and Gatehouse
Abbey Cells wing is modular- make it long or short.
These models are for personal non-redistributable use only. For commercial... [click here for more] |
Dragon Workshop |
$11.00
|
Galactic Carrier is a collection of 3D printable files that build a detailed vehicle. They have been designed to print easily and to work with 28-32mm scale figures. The vehicle can be used for systems like Games Workshop Warhammer 40K and Warhammer 40k Kill Team, Corvus Bellis Infinity, and many other sci-fi and post-apocalyptic games.
Figures are... [click here for more] |
Tabletop Terrain |
$6.50
|
This set of 3D printable terrain was born of my frustration mapping the chasm in the middle of the Redbrand Hideout map. One way or another the map ended up with unsatisfactory gaps between the upper and lower level. With the release of the Natural Bridges set, it seemed like the time to take another look at models for proper chasms, to put those bridges to good use.
The 8 STL models in this set... [click here for more] |
Fat Dragon Games |
$9.99
|
Included are seven Eight 3d models in .stl format of Herrinbone Brick dungeon and village street tiles. These tiles print great with layer height at .2 or less. A wonderful addition to any village, town, or city encounter. Two of the old legacy "Long Brick" are also included, but not shown on the cover.
Tiles are mounted to Fat Dragon Games Dragonlock tile system bases. ... [click here for more] |
Fat Dragon Games |
$2.00
|
Modular swamp hag huts and transport options! Bonus Mimic clip in components!
Also comes with witch, and witch transports!!
Thank you for supporting small artists!! These models are for personal non-redistributable use only. For commercial printing options, please contact us directly. ... [click here for more] |
Dragon Workshop |
$15.00 $9.00
|
Monstrous/Galactic Encounters - SG Team
set includes 7 bodies, modular heads and arms. Monstrous/Galactic Encounters Pre-supported minis are 28mm and un-supported minis 32mm. Most sets don't come with bases. There is a set of bases in a separate download.
... [click here for more] |
Monstrous Encounters |
$10.00
|
Friend, where will you and your loved ones be when the bombs fall? Secure their future the way you want with a state-of-the-art underground vault from Vault-Tec!
You have been chosen as the designer of this critical structure, and with this upgrade pack you’ll have all you need to expand your vault with new options for flooring and tile options which build on the existing Vault... [click here for more] |
Modiphius |
$9.00
|
This 3D print product lets you print 1 highly detailed, 32mm scale multipart miniature of the Borg Queen for use with the Star Trek Adventures tabletop roleplaying game. Please note this is an alternate pose. The Borg Queen is also available to print at home in a standard pose product available separately. Other iconic Star Trek villains are also available individually or as part of... [click here for more] |
Modiphius |
$5.00
|
This 3D print product lets you print 1 highly detailed, 32mm scale multipart miniature of Lore for use with the Star Trek Adventures tabletop roleplaying game. Please note this is an alternate pose. Lore is also available to print at home in a standard pose product available separately. Other iconic Star Trek villains are also available individually or as part of the Star Trek Adventures... [click here for more] |
Modiphius |
$5.00
|
In order to make a 3d cavern tile set that more closely resembled the cragmaw hideout map, I had to remix a number of tiles. I have wrapped them all up and making them available for a small fee for the time and effort I put into them. I hope you enjoy them!
There are 16 tiles total. There is an entrance that has water running into it for the mouth of the hideout. There are rock stairs leading up to... [click here for more] |
Fat Dragon Games |
$5.99
|
TINY, CUTE and DURABLE!
Store your characters in same pouch with dices.
It is a series of STL minis sculpted to be one of a kind PCs for your RPG campaigns.
More iconic fantasy heroes are available HERE:
... [click here for more] |
Alexey Aparin |
Pay What You Want
|
Included in this set are 4 new Ruined Dungeon Walls and 2 new Ruined Dungeon Corners. Thank you to Tom for the FDG CC program that allows these wonderful remixes.
... [click here for more] |
Fat Dragon Games |
$2.99
|
There are 7 new doors in this set that are compatible with FDG Castles and Towers of Terror.
-Solid Iron Door
-Distressed Solid Iron Door
-Barred Window Iron Door
-Distressed Barred Window Iron Door
-Barred Iron Door
-Distressed Barred Iron Door
-Broken Wooden Door
-Unique Hinge that works with these doors, and FDG doors
These doors will not fit on the regular FDG hinge, but the FDG doors... [click here for more] |
Fat Dragon Games |
$2.00
|
I am excited to offer the Burrows Core Set. A set of underground tunnels perfect for giant ants, worms, kobolds, spiders, snakes and other burrowing creatures has been a long time desire of mine that I am happy to share. The set includes 2x2 and 2x4 tunnels, reconstructed chambers, and all the usual 2x2 walls and corners to construct your own chambers. Enjoy!
Preview:
:lang="en">Burrows Core Set... [click here for more] |
Fat Dragon Games |
$19.99
|
Looking to create that grand staircase to the next level or an even taller dias for your next adventure? Look no futher, included in this set you'll find remixed STL files that add a second tier to the Dungeon Delve 2 dias stairs. I've also included some other remixes I made for my own adventure that you might find useful.
Coming Soon: I am still working on the second tier round corner stairs which... [click here for more] |
Fat Dragon Games |
$3.00
|
DRAGONLOCK™ is an interlocking terrain system that allows you to create fully modular, multi-level 28mm scale dungeon terrain for your RPG or wargame on your home 3D printer. Individual pieces links to neighboring pieces with our exclusive Dragonbite™ clips. Each set is delivered as a downloadable .stl file, and once you have the set, you can print as many pieces as you like and... [click here for more] |
Fat Dragon Games |
$14.99 $11.24
|
Blacksmith Forge with LED
This is a remix of the forge from the "DRAGONLOCK Ultimate: Blacksmith Shop" and the "DRAGONLOCK Ultimate: LED Dungeon Wall (2x2 tile)".
There are three parts in the file, the Forge, the LED Tray, and the Flame.
NOTE: you have to supply your own battery and LED. See the "DRAGONLOCK Ultimate: LED Dungeon Wall (2x2 tile)" for information on suggested batteries, LEDs,... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Garbage Truck is a collection of 3D printable files that build a detailed Garbage Truck vehicle. They have been designed to print easily and to work with 28-32mm scale figures. The vehicle can be used as terrain for systems like Games Workshop Warhammer 40K and Warhammer 40k Kill Team, Knight Models Batman Miniature Game, Corvus Bellis... [click here for more] |
Tabletop Terrain |
$5.80
|
Busy Little Dwarves Expo #2 is a recreation of the tile styles in Fat Dragon Games Dungeons Expansions not already represented in the Realm of the Mountain King set, or the various Busy Little Dwarves titles.
It includes the files seen in the viewer and listed below:
2x2 Dwarven Floor 2
2x4 Dwarven Floor 2
4x4 Dwarven Floor
4x4 Dwarven Floor 2
2x2 Dwarven Wall Hole
2x2 Dwarven Well (empty)
2x2... [click here for more] |
Fat Dragon Games |
$10.99
|