| Title ▲ |
Publisher |
Price |
This product is for a a digital STL file for use with your 3D printer. This STL set provides a tray to place a 25mm or 30mm miniature to provide a raised lip to snap on small colored clips to represent status defined by the GM/DM. The clips are interchangeable on either tray. Each tray has a small handle with a texture surface so you can push or pick up and move the mini with all the status clips... [click here for more] |
Blessed Machine |
$3.00
|
![3D Printable Chests [BUNDLE]](https://d1vzi28wh99zvq.cloudfront.net/images/7523/209578-thumb140.jpg)
3D printable, working chests that you can print out at home and use them as a cheaper, but still visually pleasing, alternative on your tabletop.
They were designed and tested by the two artists of Black Scrolls Games.
These diverse chests will be helpful if your adventure leads your team into a dungeon, a house, chapel, or any other forgotten places.
This special bundle... [click here for more] |
Black Scrolls Games |
$13.93 $10.00
|
Ammunition Trays for Westerner's Dash for Six-gun, Derringer, Buffalo Rifle, Lever-Action Rifle or Shotgun. OpenLOCK trays for Six-gun, Derringer, Buffalo Rifle, or Lever-Action Rifle. Shells for Six-gun, Derringer, Buffalo Rifle, Shot gun, and Lever-Action Rifle included.
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer... [click here for more] |
Blessed Machine |
$3.00
|
BOOM! KAPOW! WHAM! Need to see what area your power, grenade, or breath weapon effects? Try these simple yet effective files, which will let you measure the impact.
Separate Small, Medium, and Large Blast Templates as well as the Cone (Burst) Template compatible for Savage Worlds. Both the Large Blast Templates and Cone Template are available as single piece print files and multiple piece... [click here for more] |
Pinnacle Entertainment |
$2.00
|
OpenLOCK Bow & Arrow Ammunition Tracker
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture in the below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
OpenLOCK Buffalo Rifle Ammunition Tracker
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture in the below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
The Cobbled Bases are great if you want to see what the texture of the Cobbled Roads for Lord Cireneg's City are like. They are pieces cut from the same tiles so they will match the look perfectly. Solely made with cobble stones so you can add your own details as you wish. ... [click here for more] |
Devious Games |
Pay What You Want
|
That wall grants how much Cover? Those minions are surrounding you, each gains 3 Gang Up! Condition Blocks to mark Conditions of Wild Cards, Extras and more for your Savage Worlds games.
You will be getting a 3D STL digital file to print your own models.
Included for this purchase are the following files:
Cover 4-sided block (each side marked with appropriate penalties)
Range... [click here for more] |
Pinnacle Entertainment |
$2.00
|
Watch out that train is an Unstable Platform! Did that minion break your sword, so you are using a frying pan to attack now, that is an Improvised Weapon? Condition Pointers to mark Conditions of Wild Cards and Extras for your Savage Worlds games.
You will be getting a 3D STL digital file to print your own models.
Included for this purchase are the following files:... [click here for more] |
Pinnacle Entertainment |
$2.00
|
I am Wild Attacking this turn! Can't remember if your prone? Condition Pointers to mark Conditions of Wild Cards and Extras for your Savage Worlds games.
You will be getting a 3D STL digital file to print your own models.
Included for this purchase are the following files:
Blank Pointer (unmarked)
Prone Pointer (marked "P")
Run Pointer (marked "R")
Wild Attack... [click here for more] |
Pinnacle Entertainment |
$2.00
|
Cowboy Boot Dice Tower. Includes removable spur. Includes separate OpenLOCK base dice corral embossed with Boot Barn.
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture below. YMMV.
Attributions:
Boot created by https://www.cgtrader.com/bilrob and can be found here: https://www.cgtrader.com/free-3d-print-models/fashion/shoes/cowboy-boots-531ce6a8-a13e-4288-81d8-eac4c7b36610... [click here for more] |
Blessed Machine |
$3.00
|
Slotted-Hinge Doors and 2/3rd Height Separate Walls
This set includes STL files for:
Slotted-Hinge Doors:
Steel Door
Prison Door
Broken Wood Door
Remixed from FDG0183U – DRAGONLOCK Ultimate – Dungeon Expansion Set 9. These doors have been redesigned to be interchangeable with the standard separately hinged dungeon doorways found in various Fat Dragon Game DRAGONLOCK sets. To use them, you... [click here for more] |
Fat Dragon Games |
$2.99 $2.39
|
Dynamite Dice Vault This product is for a set of digital STLs file for use with your 3D printer. Printed at the provided size, should allow thee internal space to fit ten 16mm dice.
Included with the STLs is a readme detailing printer settings to achieve the picture below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
Game Tokens:Ammo STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Arcade Coin STL This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Atom STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Bound Status STL This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Brain Benny STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the picture... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Carrot STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Caterpillar STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Chaos STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Circuits STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Coronavirus STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Crosses STL.
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Explosion STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Fan STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Fangs STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Fireball STL This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Fly STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens:Gas Can STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Gear STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Hanging Bat
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Hellmouth STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Illuminati Symbol STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
This token also has a special feature. This model comes in... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Launch Button STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Lightbulb STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Living Sculpture STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Manhole Cover STL.
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Moon STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Net STL.
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Padlock STL.
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Pencil STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Pentagram STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Power Port STL.
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Screw STL.
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Shaken Status STL This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Sheriff's Badge STL This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to... [click here for more] |
Blessed Machine |
$1.00
|
Game tokens: Six Shooter STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Syringe STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Tools STL.
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Log In 
