Title |
Publisher |
Price |
ShipWorks is a 3D printable OpenLOCK compatible Ship building system for RPGs and wargames. OpenLOCK based, it is the ultimate customizable ship construction kit, allowing for nearly infinite ship layouts. Customize your hulls, prow, sterncastle, forecastle, decking, profile, weapons, interior and more. Put stairs, hatches, and masts where you want them. Let your players' imaginations- or your own... [click here for more] |
Dragon Workshop |
$30.00 $18.00
|
ShipWorks Core -Tallship expansion- gives you another deck to customize and kit out; or be creative- and use the tallship deck to build a frigate. Tallship addon lets you use normal size- or longer - forecastles as well. Requires ShipWorks Core
Thank you for supporting small artists!! These models are for personal non-redistributable use only. For commercial... [click here for more] |
Dragon Workshop |
$6.00 $3.60
|
This set of 3D-printable STL models includes three sizes of clip-on walls (plus two reversed from side to side). With these five models, you can clip walls to the outside of any dungeon floor tiles (including corners and intersections), allowing you to use the full floor space. For instance, you can create a corridor a full tile wide (2" wide), a room with exactly 4" or 6" of floor space, or other... [click here for more] |
Fat Dragon Games |
$2.00
|
ShipWorks Core -Wideship add-on- This addon lets you increase the width of the core ships and airships, by two inches, as well as adding some sterncastle customization options that are not available otherwise. Requires ShipWorks Core, strongly recommend ShipWorks Tall Ship Addon as well.
Thank you for supporting small artists!! These models are for personal... [click here for more] |
Dragon Workshop |
$6.00 $3.60
|
This is a revised, retextured, and updated waterfall from the original legacy Wet Caverns Set. I did this waterfall specifically for the Cragmaw Hideout section of the Lost Mines of Phandelver. This model was one of my first big projects when I got into tile remixing. I made this using the original caverns walls, the water from Dungeon Expansion 5, and a whole lot of very careful stretching in meshmixer.... [click here for more] |
Fat Dragon Games |
$1.00
|
Part Two of the Dungeons Beneath the Manor- Containing:
42 subterranean dungeon components, with extra wide spacing on the tiles for easier player and Monster movements while journeying the narrow spaces
32 Accessories for fleshing out the Dungeon
Dead Cultist
Male and Female Ghast miniatures
Two Ghoul miniatures
Five Grick miniatures
Scatter stalagmite tile
Rat swarm miniature
Two... [click here for more] |
Dragon Workshop |
$12.00
|
I am so excited to offer this set! I got sick of having loose scatter on a battle mat and so decided to make an FDG community forest tile set. All tiles are 4x4 anddesigned in a way that preserves the grid without adding obnoxious lines. This set comes with many unique tiles. Printing just 1 of each tile provides over 3 and half square feet of play. When combine the other Woodland and Riverside sets,... [click here for more] |
Fat Dragon Games |
$19.99
|
These files require the DragonLock Tower of Terror set. This is a remix and expansion to the Tower of Terror. These files allow you to create a level without a floor to make a level double high. There are also pieces with stairs mounted to the walls, so you can have stairs go up through the level without a floor. There are 4 wall pieces in this set. The pieces with stairs require supports when printed. ... [click here for more] |
Fat Dragon Games |
$0.50
|
Included in this download are .stl files for 16 different landscape textures, 4 each of Grass, Rough, Rocky, and Snow Drift terrain.
Each one is mounted to DRAGONLOCK™ Ultimate bases for use with other Fat Dragon Games tiles!
... [click here for more] |
Fat Dragon Games |
$2.00
|
Part one of the Dungeons Beneath the Manor- Containing:
37 subterranean dungeon tiles, with extra wide spacing on the tiles for easier player
and Monster movements while journeying the narrow spaces
Cultists: 4 Living
Cultists: 4 Hollowed Robes
Cultists: 4 Skull Faced
Cultists: 2 dead bodies
25mm dirt base
The Shambling Monstrosity
Mimic Door
Stone slab doors as per the module- and... [click here for more] |
Dragon Workshop |
$12.00
|
These files require the other DragonLock tiles, they are not useful by themselves. This is a remix of the base set of Dungeon Walls and Cavern Wall. These files allow you to create levels in your Dungeon or Cavern in 1-inch increments above the base floor. This set includes the following types of files.
1 - R - Risers to create a raised level. 2 - RC - Risers with Cavers Walls 3 - RD - Risers... [click here for more] |
Fat Dragon Games |
$2.50
|
Part one of the Amber Dungeon- Containing:
102 tile components for building and customizing the Amber Dungeon
46 accessory components for decorating the Amber Dungeon
Two Amber Golems, both with an alternate pose
Two flame skulls
The Forgetful Lich miniature (with a 'cleaner' look alt)
Vilnius, the cowering mage miniature
Opening doors, and secret room concealing caps
The Wand of... [click here for more] |
Dragon Workshop |
$11.00 $6.60
|
Includes a normal height and half height remixed curve wall from Fat Dragon Games Dungeons. This set is great for the exterior of buildings where you don't want a tile edge.
... [click here for more] |
Fat Dragon Games |
$1.00
|
Included in this set is 20 custom remixed Caverns tiles for use with Fat Dragons Games Caverns Starter and Expansion set.
... [click here for more] |
Fat Dragon Games |
$2.00
|
Expand your GM Screen with this remixed skull dice tray.
This set would not have been possible without the work of Peter Kirylo, Sr. He will share in the royalties for this set, as he is due for his wonderful circle tray model I needed to craft it. I look forward to working with him again to bring great models to this community.
Printing instructions:
6 top layers minimum suggested for this model.... [click here for more] |
Fat Dragon Games |
$1.99
|
Part Two of the Amber Dungeon- Containing:
156 tile components for building and customizing the Amber Dungeon
24 accessory components for decorating the Amber Dungeon
7 familiar statue inserts for decorating the dungeon
Small Wizard Statue (with filament pre-support option)
Center Statue (with removable hollow head option) and filament pre-support options
6 miniaturesThree Nothic... [click here for more] |
Dragon Workshop |
$11.00 $6.60
|
This set is designed to be used with the Woodland Core Set. All tiles are 4x4. The cliffs are 4" tall and with the correct risers can be used to multi-leveled cliffs and cave entrances. Additionally, if you have the Woodland Elevation Set, this comes with additional transition tiles from elevated forest floors to cliffs. The tiles are designed in a way that preserves the grid without adding obnoxious... [click here for more] |
Fat Dragon Games |
$14.99
|
This set of 22 3D-printable STL models extends the Fat Dragon Games Cavern Expansion 1 (legacy models) with additional water tiles.
These tiles are based on the original FDG style of caverns.
If you'd like Wet Caverns based on the current/revised FDG style of caverns, see Wet Caverns 2.
Both styles look great, just pick the one that best fits the rest of your cavern prints!
Wet... [click here for more] |
Fat Dragon Games |
$12.99
|
This set provides a wagon/horse trail to be used with the Woodland Core, Hillside and Elevation Sets. All tiles are 4x4. Enjoy!
Set Preview Link:
Forest Trails
Recommended Print Settings:
FDG Terrain Profile
Optimal Layer Height: .1 or .2 minimum with adaptive layer settings at .1 best and .01 variance
Optimal Infill: 10% (5% works, but there will be an occasion small pit or hole) ... [click here for more] |
Fat Dragon Games |
$9.99
|
Part One of the Blue Waters Inn- A lovingly crafted 'stand alone' building with a compact size, and hand sculpted features, each plank and stone uniquely sculpted individually.
19 easy to print components making up the 1st floor walls and floors.
42 accessories and miscellaneous components
A creepy wooden clown mask prop
A 3"x2" interior small outbuilding
Our typical opening doors,... [click here for more] |
Dragon Workshop |
$11.00
|
The Riverside Core set is designed to integrate with the Woodland Sets to provide a more immersive outdoor battleground. This set comes with 18 unique 4x4 tiles. When combined with the other Woodland and Riverside sets, this can be expanded to over 20sqf of sprawling woodlands and rivers!
Recommended Print Settings:
FDG Terrain Profile
Optimal Layer Height: .1 or .2 minimum with adaptive layer settings... [click here for more] |
Fat Dragon Games |
$9.99
|
This set is designed to go with the Woodland Core Set and Woodland Cliff Set, although it can be used on its own. All tiles are 4x4 and includes the removable tree tops to make a thick forest more visible during gameplay. The tiles are designed in a way that preserves the grid without adding obnoxious lines. This set comes with 31 unique tiles. Printing just 1 of each tile provides over 3 square feet... [click here for more] |
Fat Dragon Games |
$14.99
|
This set works as a stand-alone set, ideal for hillsides and plains with small clusters of trees. All tiles are 4x4. This set comes with 25 unique tiles. This set is designed to be utilized with the other Woodland and Riverside sets.
NOTE: This set does not include the Tree Tops. FDG Tree Set required. Set is playable without tops.
Recommended Print Settings:
FDG Terrain Profile
Optimal Layer... [click here for more] |
Fat Dragon Games |
$9.99
|
Buddy Cthuhlu, originally on Thingiverse by Kibilz, recut for proper printing with his own custom 4x4 FDG base. Also included is a 4x4 version of the tile for any of your own ideas. This model prints in 3 sections, so that you only have to use supports for the Buddy C top portion.
This tile is a compliment to the Lovecraftian set of terrain.
Please enjoy this free model, and consider supporting my... [click here for more] |
Fat Dragon Games |
$1.00
|
This set lets you make mostly flat timberframe roofs of any size or shape you want. Clip them together with Dragonlock clips the same way you would do with dungeon tiles. Also includes a version with short timberframe walls bordering a gravel or tar covered roof, and an edge clip with roof texture to use with any flat tile you want. The edge clip can also be used as a decorative accent on multi-story... [click here for more] |
Fat Dragon Games |
$2.99
|
This set includes 15 prison bar tiles from the fan-created section of the Fat Dragon Games forums. The tiles include:
Tiles with bars along the edge of the base (straight, corner, doorway, etc.)
Tiles with bars across the center of the base (straight, corner, intersections, doorway, etc.)
Dungeon Wall tiles with bars coming out (along both center and edges) and with bars along opposite edge
All... [click here for more] |
Fat Dragon Games |
$5.99
|
I was tired of printing entire second floors for the roof space of single storey buildings, since mostly I don't want the roof space to be playable anyway. This is my solution.
Includes a 4x4 "Roof Beam" as well as a 4x2 version
They can be used with the normal FDG roof tiles and trusses as well as with Michael Sheridans wider roof set. (Two of the 4x4 pieces can be clipped together for the 4"... [click here for more] |
Fat Dragon Games |
$1.50
|
This set of 3D-printable terrain expands on the Fat Dragon Games line of cavern tiles with water alongside walls and corners -- based on the latest style of FDG cavern walls, floors, and water. It includes a waterfall to support maps with water on multiple levels, such as the Cragmaw Hideout from the introductory 5e Lost Mine of Phandelver adventure.
(If you want the same models with wavy water... [click here for more] |
Fat Dragon Games |
$14.99
|
Excited to offer this capstone to the Woodland, Hillside, and Riverside Sets. The Woodland Stream set offers a dynamic modular stream system for varying elevations meant to integrate with the other outdoor sets. All tiles are 4x4. Check out this preview:
Woodland Streams Preview
Print Recommendations: Use the FDG terrain profile for the best results. ... [click here for more] |
Fat Dragon Games |
$14.99
|
This set includes a number of tower walls and floors to expand the selection in the FDG Tower of Terror set. The three main styles of included pieces are:
Tower walls on a full 4x4 dungeon floor, for a map that includes large curved walls or a tower within a greater dungeon (such as the Sunless Citadel and Cragmaw Castle)
Tower walls with dungeon floors in the inside and village sidewalk on the... [click here for more] |
Fat Dragon Games |
$9.99
|
Bring to life a location your players won't forget. The Arcane winery features a optional basement, fully detailed interior and exterior, options for dropping in LED tealights into the roof areas, and a second, vine covered exterior wall option. Over 70 accessories to help bring your winery to life.
The One Eyed Demon Skull (fully to scale as a 1:1 printable), and the great old one himself- summoned... [click here for more] |
Dragon Workshop |
$20.00
|
This is the 2nd set of requested tiles my friend Lou asked me to try and make for him for to go with to Tower of Terror set. Included a small and large balcony, small bump out, potty and support walls that can go under the balconies and bump out.
Dragonbite clips can be found here:
www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20
Recommened... [click here for more] |
Fat Dragon Games |
$3.99
|
This set includes 8 dungeon-themed tiles from the fan-created section of the Fat Dragon Games forums. The tiles include:
A stellar double-size water basin, with several variations to choose from
A wall-and-post (both orientations)
A corner window (both orientations)
A floor with two posts on opposite diagonal corners
A double-thick wall, just to provide some variation for long wall sections
A short... [click here for more] |
Fat Dragon Games |
$5.99
|
This set adds clip-on wall options to allow full 2" wide cavern corridors and caverns that use the entire space of their floor tiles. It includes:
Standard 2", short 1.5", and long 2.5" clip-on cavern walls, with which you can make any corridor, intersection, or room wall. The short and long walls have two clip slots each, so the same wall works in either orientation.
Clip-on torch, skull, and... [click here for more] |
Fat Dragon Games |
$7.99
|
Love the outdoor sets, but wish you could cut down on printing and integrate with battle maps and mats? Well, now you can. Included in this set are edge pieces for each of the three outdoor sets and other 4x4 FDG tiles allowing for seamless integration with battle mats. Check out the following previews, enjoy:
Woodland Hillside Riverside Preview
Print Settings: I recommend using the official FDG terrain... [click here for more] |
Fat Dragon Games |
$9.99
|
Part Two of the Blue Waters Inn- A lovingly crafted 'stand alone' building with a compact size, and hand sculpted features, each plank and stone uniquely sculpted individually.
41 easy to print components making up the 2nd floor walls, floors and roof
18 accessories and miscellaneous components
A second creepy wooden clown mask prop
A second 3"x2" interior small outbuilding
Our... [click here for more] |
Dragon Workshop |
$11.00
|
This is a set to expand on the current stone and wooden stairs that the dragonlock system has originally, with both different versions at different sizes along with the Railings.
Take note that stairs with railings already attached will need supports to print
This set comes with 59 files ///update: 61 tiles
Added 2 faux stairs opening tiles
This product was created under license. Dragonbite... [click here for more] |
Fat Dragon Games |
$5.00
|
Busy Little Dwarves Expo #1 is a recreation of the tile styles in Fat Dragon Games Dungeons Expansion 1 not otherwise represented.
It includes:
2x2 Ruined Wall
2x2 Hidden Wall (rotating)
2x4 Floor
2x2 Corner Pillar
2x2 Corridor 1
2x2 Corridor 2
2x2 Floor Rubble
... [click here for more] |
Fat Dragon Games |
$3.00
|
Included in this set are 21 awesome new tiles to compliment your Fat Dragon Games Caverns! This set is specifically made to compliment the FDG Caverns Expansion 1, Wet Caverns, and Dry Caverns.
More Caverns Display
Download the free DRAGONBITE™ Clip model here: /product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20... [click here for more] |
Fat Dragon Games |
$9.00
|
Over seventy feet long, and able to rear up to fifty feet tall, the Tarrasque is a terrifying monster even dragons think twice about approaching! Now, you can print out a full scale version of this mythic beast, and watch your players panic when they realize what they're facing! Includes both OBJ and STL file formats, a pre-chopped version sized to fit even inside an Anycubic Photon or similar sized... [click here for more] |
Valandar |
$2.49
|
I am really excited to share the Riverside Waterfall Set. With over 30 modular waterfall models to mix, match, and stack, you can now add rapids to your rivers or treacherous falls for your adventurers to navigate. All tiles are 4x4 and designed to integrate perfectly with the existing Riverside and Woodland sets. Use the PWYW Woodland and Riverside Risers to compliment this set. Enjoy!
See... [click here for more] |
Fat Dragon Games |
$19.99
|
The Riverside Elevation set is designed to integrate with the other Riverside and Woodland Sets to provide a more immersive outdoor battleground. This set comes with 24 unique 4x4 tiles. When combined with the other Woodland and Riverside sets, this can be expanded to over 20sqf of sprawling woodlands and rivers!
Recommended Print Settings:
FDG Terrain Profile
Optimal Layer Height: .1 or .2 minimum... [click here for more] |
Fat Dragon Games |
$9.99
|
2 sets of 14 clip on Handrails ... [click here for more] |
Fat Dragon Games |
$1.99
|
Included in this set are 35 tiles to expand your FDG Caverns. These tiles were designed by Tim as part of my Patreon and remixed from both the revised and legacy caverns, as well as the water tile from Dungeon Hazards, Skull Entrance, and the very awesome Terrain4Print rock formations released under the CC-AO license.
... [click here for more] |
Fat Dragon Games |
$10.99
|
This set of tiles was drafted for construction by my patrons. Please be advised these mine tracks are original construction and do not fit the mine tracks from the soon to be published FDG Mines official set. When that set posts, you can expect updates to this set for compatability and track transitions.
Included in this set are over 35 remixed models for Fat Dragon Games Caverns dungeon terrain.... [click here for more] |
Fat Dragon Games |
$8.99
|
Included in this set are three custom remixed Fat Dragon Games Dungeon Tiles. Add pools of nefarious and vile liquids to your dungeons. Your most fearsome evil wizards will thank you gleefully. Wonderful for pushing players into or goading into a swim with a failed perception check. These pools will make a great addition to any dungeon. To maximize the ulitility of this set, we suggest you also pick... [click here for more] |
Fat Dragon Games |
$2.00
|
ShipWorks is a 3D printable OpenLOCK compatible Ship building system for RPGs and wargames.
The Airship Components add-on gives you the ability to use the library of hundreds of airship components to convert a core ship into a airship. From a massive elemental ring powered sky galleon, to etheric pontoons, crystal powered, wings, or mystical engines. Use the components to customize your ships... [click here for more] |
Dragon Workshop |
$18.00 $10.80
|
ShipWorks is a 3D printable OpenLOCK compatible Ship building system for RPGs and wargames. The ShipWreck and Battle Damage addon gives you hundreds of high quality components that allow you to use OpenLOCK magnetic clips to swap out damaged sections in a flash in game to reflect battle damage- or build ship wrecks and rotting derelicts. Also includes the 15 and 30 degree tilted shipwreck bases,... [click here for more] |
Dragon Workshop |
$10.00 $6.00
|
These are like the basic cavern edges, except more dynamic... Bring your multilevel cavern to life with a variety of edge options. Check out the preview below and enjoy!
Set Preview:
:lang="en">Dynamic Cavern Edges Set
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well. Cheers! ... [click here for more] |
Fat Dragon Games |
$4.99
|
This set includes 10 cavern-themed ruined tiles from the fan-created section of the Fat Dragon Games forums. The tiles include:
A corner on a ruined floor
Two walls on ruined floors
A ruined floor with a post (both orientations)
A ruined floor with two posts
Four various ruined floors
Recommended Print Settings:
Layer Size: 0.15mm
Infill: 15% all tiles with posts;... [click here for more] |
Fat Dragon Games |
$5.99
|