| Title |
Publisher |
Price |
Dragonbite Clip Removal Tool!
Tired of damaging your clips and fingers? Try this Dragonbite clip removal tool!
Prints in about 15 minutes when printed with FDG terrain profile on Ender-3.
New addition! Version 3 has a wider handle with a textured grip. A slip on handle can also be printed for extreme clip removal!
These are the clips used:
https://www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
ShipWorks is a 3D printable OpenLOCK compatible Ship building system for RPGs and wargames. OpenLOCK based, it is the ultimate customizable ship construction kit, allowing for nearly infinite ship layouts. Customize your hulls, prow, sterncastle, forecastle, decking, profile, weapons, interior and more. Put stairs, hatches, and masts where you want them. Let your players' imaginations- or your own... [click here for more] |
Dragon Workshop |
$30.00 $25.50
|
These risers use Fat Dragon Games DragonbiteTM clip-together bases, and support the bottom of an upper layer of Dragonbite tiles. They come in a variety of heights to allow you to position the upper level exactly where you want. The logic behind the various heights is:
Elevated/Dais 27.7mm: If you put a floor on top of this, the surface of the floor will be roughly level with the... [click here for more] |
Aether Studios |
FREE
|
This set expands the options for the village street sets to include 4x4 wide street options, in disrepair streets and sidewalks, and a special street culvert. The goal was to provide more variation to the fantastic FDG village street tiles. Enjoy!
Preview:
Village Street Options
For best quality prints, use the FDG terrain profile at .2mm or better height. Cheers! ... [click here for more] |
Fat Dragon Games |
$4.99 $4.24
|
Included in this title are stl models for 6x6 and 8x8 Dungeon and Cavern (revised) floors. For use with Fat Dragon Games Dragonlock terrain systems. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This is a revised, retextured, and updated waterfall from the original legacy Wet Caverns Set. I did this waterfall specifically for the Cragmaw Hideout section of the Lost Mines of Phandelver. This model was one of my first big projects when I got into tile remixing. I made this using the original caverns walls, the water from Dungeon Expansion 5, and a whole lot of very careful stretching in meshmixer.... [click here for more] |
Fat Dragon Games |
$1.00 $0.85
|
Ready to expand your sewers? This set is designed to integrate smoothly with the FDG village sewer set to provide deeper sluiceways, pools, archways, crossings, bridges, and other misc. switches and cranks. Enjoy!
Preview:
:lang="en">Sewer Expansion
For best quality prints, use the FDG terrain profile at .2mm or better height. Cheers! ... [click here for more] |
Fat Dragon Games |
$14.99 $12.74
|
This set of 3D-printable STL models includes three sizes of clip-on walls (plus two reversed from side to side). With these five models, you can clip walls to the outside of any dungeon floor tiles (including corners and intersections), allowing you to use the full floor space. For instance, you can create a corridor a full tile wide (2" wide), a room with exactly 4" or 6" of floor space, or other... [click here for more] |
Fat Dragon Games |
$2.00 $1.50
|
ShipWorks Core -Tallship expansion- gives you another deck to customize and kit out; or be creative- and use the tallship deck to build a frigate. Tallship addon lets you use normal size- or longer - forecastles as well. Requires ShipWorks Core
These files are for personal use only. For Commercial inquiries, please contact us. ... [click here for more] |
Dragon Workshop |
$6.00 $5.10
|
Extra Truck Bodies is a collection of 3D printable files that includes four new bodies that can be added to our truck kits for more variety. They have been designed to print easily and to work with 28-32mm scale figures.
NOTE: This is an EXPANSION KIT, and will require owning one of our other kits like the Military Truck, Prospector Rover, or Outpost Utility to use. The extra... [click here for more] |
Tabletop Terrain |
$4.40 $3.30
|
Monstrous/Galactic Encounters - SG Royal Guard
Set comes with modular arms and heads. Monstrous/Galactic Encounters Pre-supported minis are 28mm and un-supported minis 32mm. Most sets don't come with bses. There is a set of bases in a separate download. ... [click here for more] |
Monstrous Encounters |
$8.00
|
Hello Explorers!
The Frontier Explorer presents
UPF Assault Scout Technical Manual
The UPF Assault Scout. Probably the most iconic ship in the Frontier, the assault scout can be seen in almost any SpaceFleet patrol and as part of every planetary militia. Small, fast, and versatile, the assault scout is a ship unmatched by anything in the Sathar fleets.
Despite its advantages,... [click here for more] |
Frontier Explorer |
Pay What You Want
|
This set of 4 dungeon to cavern transition tiles were made upon the request of the community and many of my patrons.
... [click here for more] |
Fat Dragon Games |
$2.99 $2.24
|
These files require the DragonLock Tower of Terror set. This is a remix and expansion to the Tower of Terror. These files allow you to create a level without a floor to make a level double high. There are also pieces with stairs mounted to the walls, so you can have stairs go up through the level without a floor. There are 4 wall pieces in this set. The pieces with stairs require supports when printed. ... [click here for more] |
Fat Dragon Games |
$0.50 $0.38
|
ShipWorks Core -Wideship add-on- This addon lets you increase the width of the core ships and airships, by two inches, as well as adding some sterncastle customization options that are not available otherwise. Requires ShipWorks Core, strongly recommend ShipWorks Tall Ship Addon as well.
These files are for personal use only. For Commercial inquiries,... [click here for more] |
Dragon Workshop |
$6.00 $5.10
|
Military Cargo Transporter is a collection of 3D printable files that build a detailed vehicle. They have been designed to print easily and to work with 28-32mm scale figures. The vehicle can be used for systems like Games Workshop Warhammer 40K and Warhammer 40k Kill Team, Corvus Bellis Infinity, and many other sci-fi and post-apocalyptic games.
Games... [click here for more] |
Tabletop Terrain |
$6.10 $4.58
|
* Please log into IMGUR to see the images below *
SET 08 - CR2032 Battery Chest
This printable 10-battery holder includes one chest base model with slots, and a lid.
Lid is set up supported and non-supported, four options:
Hollow (no supports, great for resin printers, angled prints or adding your own)
Supported, breakaway supports
Slots
Slots with a lockline to help bed adhesion.
Additional... [click here for more] |
Fat Dragon Games |
$3.00 $2.55
|
These files require the other DragonLock tiles, they are not useful by themselves. This is a remix of the base set of Dungeon Walls and Cavern Wall. These files allow you to create levels in your Dungeon or Cavern in 1-inch increments above the base floor. This set includes the following types of files.
1 - R - Risers to create a raised level. 2 - RC - Risers with Cavers Walls 3 - RD - Risers... [click here for more] |
Fat Dragon Games |
$2.50 $1.88
|
Included in this download are .stl files for 16 different landscape textures, 4 each of Grass, Rough, Rocky, and Snow Drift terrain.
Each one is mounted to DRAGONLOCK™ Ultimate bases for use with other Fat Dragon Games tiles!
... [click here for more] |
Fat Dragon Games |
$2.00 $1.50
|
Necroplex 3D Printable Crafting Blocks
Necroplex is a series of 3D printable models designed to build modular walkways and cityscapes for use in tabletop miniature games.
We designed everything to get more terrain on your table with the least possible printing time. Necroplex combines 3D printable pieces with common and affordable terrain building materials, such as foam core, wooden... [click here for more] |
Hack Shack Games |
$4.95 $3.71
|
This product contains a number of .stl files for the Dragonlock Castle and Tower of terror. these include:
- a crenelated castle corner adaptor for a round tower.
- corner adaptor with arrow loop
- castle corner with windows
- castle corner with arrow loops
- tower floor adaptor with trap door
- castle corner with arrow loop and archway
Files are not perfect but will continue to be tweaked... [click here for more] |
Fat Dragon Games |
$5.00 $4.25
|
This set includes three sizes of clip-on walls (plus two reversed from side to side). With these five models, you can clip walls to the outside of any Fat Dragon Games dungeon floor tiles (including corners and intersections), allowing you to use the full floor space. For instance, you can create a corridor a full tile wide (2" wide), a room with exactly 4" or 6" of floor space, or other similar... [click here for more] |
Fat Dragon Games |
$2.99 $2.24
|
Monstrous/Galactic Encounters - SG Team
set includes 5 male bodies, modular heads and arms. Monstrous/Galactic Encounters Pre-supported minis are 28mm and un-supported minis 32mm. Most sets don't come with bases. There is a set of bases in a separate download.
... [click here for more] |
Monstrous Encounters |
$10.00
|
Extra Truck Chassis is a collection of 3D printable files that includes two new chassis, a tracked option, a trailer, and additional detail pieces that can be added to our truck kits for more variety. They have been designed to print easily and to work with 28-32mm scale figures.
NOTE: This is an EXPANSION KIT, and will... [click here for more] |
Tabletop Terrain |
$3.80 $2.85
|
Military Truck is a collection of 3D printable files that build a detailed vehicle. They have been designed to print easily and to work with 28-32mm scale figures. The vehicle can be used for systems like Games Workshop Warhammer 40K and Warhammer 40k Kill Team, Corvus Bellis Infinity, and many other sci-fi and post-apocalyptic games.
Pig Iron Production... [click here for more] |
Tabletop Terrain |
$5.80 $4.35
|
Expand your GM Screen with this remixed skull dice tray.
This set would not have been possible without the work of Peter Kirylo, Sr. He will share in the royalties for this set, as he is due for his wonderful circle tray model I needed to craft it. I look forward to working with him again to bring great models to this community.
Printing instructions:
6 top layers minimum suggested for this model.... [click here for more] |
Fat Dragon Games |
$1.99 $1.49
|
Necroplex 3D Printable Crafting Blocks
Necroplex is a series of 3D printable models designed to build modular walkways and cityscapes for use in tabletop miniature games.
We designed everything to get more terrain on your table with the least possible printing time. Necroplex combines 3D printable pieces with common and affordable terrain building materials, such as foam core, wooden... [click here for more] |
Hack Shack Games |
$7.95 $5.96
|
I was tired of printing entire second floors for the roof space of single storey buildings, since mostly I don't want the roof space to be playable anyway. This is my solution.
Includes a 4x4 "Roof Beam" as well as a 4x2 version
They can be used with the normal FDG roof tiles and trusses as well as with Michael Sheridans wider roof set. (Two of the 4x4 pieces can be clipped together for the 4"... [click here for more] |
Fat Dragon Games |
$1.50 $1.13
|
Outpost Utility Truck is a collection of 3D printable files that can be built into a variety of six-wheeled science fiction trucks. They have been designed to print easily and to work with a variety of 28-32mm scale figures. They can be used for scatter terrain on a sci-fi tabletop for a variety of systems like Games Workshop Warhammer 40K and Warhammer 40k Kill Team,... [click here for more] |
Tabletop Terrain |
$4.50 $3.38
|
This set of 22 3D-printable STL models extends the Fat Dragon Games Cavern Expansion 1 (legacy models) with additional water tiles.
These tiles are based on the original FDG style of caverns.
If you'd like Wet Caverns based on the current/revised FDG style of caverns, see Wet Caverns 2.
Both styles look great, just pick the one that best fits the rest of your cavern prints!
Wet... [click here for more] |
Fat Dragon Games |
$12.99 $9.74
|
This set lets you make mostly flat timberframe roofs of any size or shape you want. Clip them together with Dragonlock clips the same way you would do with dungeon tiles. Also includes a version with short timberframe walls bordering a gravel or tar covered roof, and an edge clip with roof texture to use with any flat tile you want. The edge clip can also be used as a decorative accent on multi-story... [click here for more] |
Fat Dragon Games |
$2.99 $2.24
|
Necroplex 3D Printable Crafting Blocks
Necroplex is a series of 3D printable models designed to build modular walkways and cityscapes for use in tabletop miniature games.
We designed everything to get more terrain on your table with the least possible printing time. Necroplex combines 3D printable pieces with common and affordable terrain building materials, such as foam core, wooden... [click here for more] |
Hack Shack Games |
$7.95 $5.96
|
A modification to the GM screen of Doom that lets you have top drawers.
The Base piece has a custom clip for the bottom, I do advice to glue that.
The top comes either in one part that needs supports or 2 parts that need to be glued together that are supportless, An alignment peg is included.
7 drawers with the dice names are also included
You will need a copy of the GM screen of Doom to use... [click here for more] |
Fat Dragon Games |
$3.99 $2.99
|
Includes a normal height and half height remixed curve wall from Fat Dragon Games Dungeons. This set is great for the exterior of buildings where you don't want a tile edge.
... [click here for more] |
Fat Dragon Games |
$1.00 $0.75
|
This product contains one .stl fils for a 60 degree 2x4 dungeon wall tile. File can be mirrored in slicing software for more options.
This product was created under license, Dragonbite Community Creator, Dragonlock, and Drgaonbite are trademarks of Fat Dragon Games in the U.S.A. and other countries.
This work contains material that is copyright Fat Dragon Games and /or other authors. Such material... [click here for more] |
Fat Dragon Games |
$1.00 $0.85
|
Included in this set is 20 custom remixed Caverns tiles for use with Fat Dragons Games Caverns Starter and Expansion set.
... [click here for more] |
Fat Dragon Games |
$2.00 $1.50
|
Monstrous/Galactic Encounters - Lt. Rip comes with modular arms. Monstrous/Galactic Encounters Pre-supported minis are 28mm and un-supported minis 32mm. Most sets don't come with bses. There is a set of bases in a separate download.
... [click here for more] |
Monstrous Encounters |
$3.00
|
Rural Roads
A collection of 3D tiles depicting rural roads suitable for your modern, post-apocalyptic, and sci-fi for RPG and tabletop games. Tiles are designed to be printed on FDM printers with 0.4mm nozzle using the Fat Dragon Games dungeon terrain Ender 3 profile. Road sections come with variants to accommodate traffic signs and stop lights.
... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
3D printable STL files for a Tavern from the Denizens of Fantasy range.
Set includes a one-piece model for rescaling purposes.
Set also includes bar furniture ... [click here for more] |
Dark Realms |
$15.95 $13.95
|
This set of 3D-printable STL models was born when I tried to model a multi-level fortress with stairs near the inside walls and some 5" wide rooms on the lower level. FDG Dungeon Expansion 11 has 2x1" models that would work, except they only have clip slots on the long side and I needed clip slots on the short edges too.
Thus, this set contains versions of the 2"x1" floor and walls from FDG Dungeon... [click here for more] |
Fat Dragon Games |
$5.99 $5.09
|
The Light Armored Vehicle is a collection of 3D printable files that build a detailed vehicle. They have been designed to print easily and to work with 28-32mm scale figures. The vehicle can be used for systems like Games Workshop's Warhammer 40K and Warhammer 40k Kill Team, Corvus Bellis Infinity, and many other sci-fi and post-apocalyptic games.
Victoria... [click here for more] |
Tabletop Terrain |
$12.00 $10.20
|
Buddy Cthuhlu, originally on Thingiverse by Kibilz, recut for proper printing with his own custom 4x4 FDG base. Also included is a 4x4 version of the tile for any of your own ideas. This model prints in 3 sections, so that you only have to use supports for the Buddy C top portion.
This tile is a compliment to the Lovecraftian set of terrain.
Please enjoy this free model, and consider supporting... [click here for more] |
Fat Dragon Games |
$1.00 $0.75
|
This set includes a number of tower walls and floors to expand the selection in the FDG Tower of Terror set. The three main styles of included pieces are:
Tower walls on a full 4x4 dungeon floor, for a map that includes large curved walls or a tower within a greater dungeon (such as the Sunless Citadel and Cragmaw Castle)
Tower walls with dungeon floors in the inside and village sidewalk on the... [click here for more] |
Fat Dragon Games |
$9.99 $7.49
|
This set includes 8 dungeon-themed tiles from the fan-created section of the Fat Dragon Games forums. The tiles include:
A stellar double-size water basin, with several variations to choose from
A wall-and-post (both orientations)
A corner window (both orientations)
A floor with two posts on opposite diagonal corners
A double-thick wall, just to provide some variation for long wall sections
A short... [click here for more] |
Fat Dragon Games |
$5.99 $4.49
|
The Necroplex Dice Tower, a towering bastion of industrial decay and randomness! Prints in two parts, no supports needed, and small print bed friendly.
The top chimney is sized to fit a standard D20, or remove the top to roll fistfulls of dice at once.
... [click here for more] |
Hack Shack Games |
$2.95 $2.21
|
This product contains a number of wall tiles where the floor has been rotated 90 degrees to make it easier to line up sewer floor tiles when rounding a corner. In addition this set includes two options for sewer stairs and an altered flow tile.
This product was created under license, Dragonbite Community Creator, Dragonlock, and Drgaonbite are trademarks of Fat Dragon Games in the U.S.A. and other... [click here for more] |
Fat Dragon Games |
$3.00 $2.55
|
The Armored Recovery Vehicle is a collection of 3D printable files that build a detailed vehicle. They have been designed to print easily and to work with 28-32mm scale figures. The vehicle can be used for systems like Games Workshop's Warhammer 40K and Warhammer 40k Kill Team, Corvus Bellis Infinity, and many other sci-fi and post-apocalyptic games.
... [click here for more] |
Tabletop Terrain |
$6.50
|
This is a set to expand on the current stone and wooden stairs that the dragonlock system has originally, with both different versions at different sizes along with the Railings.
Take note that stairs with railings already attached will need supports to print
This set comes with 59 files ///update: 61 tiles
Added 2 faux stairs opening tiles
This product was created under license. Dragonbite... [click here for more] |
Fat Dragon Games |
$5.00 $3.75
|
Use these stencils for quick and easy airbrush painting ! These stencils are compatible with walls from the legacy "Village Buildings 1" set, "Village Buildings 2" set and "Timber & Stone Walls" set. Have fun !
Stencils included : - Gable L - Gable R - Wall A - Wall B - Wall C / Wall C 1 Window - Wall D / Wall D 1 Window / Wall D 2 Windows - Wall D with door Each stencil is available... [click here for more] |
Fat Dragon Games |
$1.99 $1.69
|
This set includes 15 prison bar tiles from the fan-created section of the Fat Dragon Games forums. The tiles include:
Tiles with bars along the edge of the base (straight, corner, doorway, etc.)
Tiles with bars across the center of the base (straight, corner, intersections, doorway, etc.)
Dungeon Wall tiles with bars coming out (along both center and edges) and with bars along opposite edge
All... [click here for more] |
Fat Dragon Games |
$5.99 $4.49
|
Log In 
