Title |
Publisher |
Price ▲ |
This is the OpenLOCK clip from Printable Scenery. It is used to connect Future Worlds 3D Printable Sccenery. It's not necessary to download this file unless you purchased/downloaded either the High Tech or Industrial Scenery sets prior to 28 May 2017. This clip was inadvertantly left out of these sets prior to that date, but has since been included.
... [click here for more] |
Arid Hills Gaming |
FREE
|
Presenting a revolutionary new approach to 3D printed dungeon tiles.
For a detailed explanation, watch our demonstration below.
This sample pack is offered for free in order to allow you experiment with this new form factor. If you like what you see, you can purchase the entire base dungeon pack!
Contents: - Field Tile - Corner Tile - Single-Wall Tile - Wooden Door - Straight Clip - Corner Clip ... [click here for more] |
Wyloch's Armory |
FREE
|
25mm round body markers for use as unrisen zombies, killed enemies, or whenever you need a corpse ... [click here for more] |
3DModels |
Pay What You Want
|
Gug sized for 5E, Based on a troll model by Burntcrispy. 88mm tall x 75mm base. ... [click here for more] |
3DModels |
$0.99
|
A simple spider web that prints without support for use in your game, sized to 40mm to fit open forge and most other terrain types, resizable in your slicer if necessary. 2 mirrored webs that can be used seperately or glued together for greater stablility. Adapted from a design by MakeALot. ... [click here for more] |
3DModels |
Pay What You Want
|
5 simple stalagmites on 50mm bases for monsters to hide behind in your caves! ... [click here for more] |
3DModels |
Pay What You Want
|
Two headed troll sized for 5E, Based on a troll model by Burntcrispy. 60mm tall x 50mm base. ... [click here for more] |
3DModels |
$0.99
|
Deployable Cargo is a small collection of science fiction containers for 3D printing. They have been designed to print easily and work well with figures for Corvus Belli's Infinity, Games Workshop's Warhammer 40,000, and many other games. The three larger pieces make great standalone scatter terrain that can be painted up and thrown on the table very quickly, while... [click here for more] |
Rocketship Games |
$1.00
|
Here is a free sample of our upcoming 3D printable scenery range for Wargames and RPG.
You'll find enclosed stl files to print the model on any 3D printer.
This is a multi part model in 28mm scale that needs assembly as follow :
The recommended settings are for PLA printing on any entry level 3D printer, adapt as needed to your printer .
100 or 150 microns layer height
5% to 15% percent infill... [click here for more] |
Via Ludibunda |
Pay What You Want
|
OVERVIEW
The Flat-D Terrain "Jack's Garage" is designed for use with the Flat-D Terrain Starter Kit and Clip System (https://www.drivethrurpg.com/product/404662/FlatD-Terrain-Starter-Kit). Contains a small garage building with interior and exterior design, reversible floor panel and reversible removable roof.
TERRAIN
Terrain files are the copyrighted material... [click here for more] |
PEI Development |
$1.99
|
OVERVIEW
The Flat-D Terrain Storage Containers are designed for use with the Flat-D Terrain Starter Kit and Clip System (https://www.drivethrurpg.com/product/404662/FlatD-Terrain-Starter-Kit). Contains nine different container designs (five "clean" and four "rusted") in five different colors.
TERRAIN
Terrain files are the copyrighted material of Kevin L. Kitchens,... [click here for more] |
PEI Development |
$1.99
|
OVERVIEW
The Flat-D Terrain Two-Story building is designed for use with the Flat-D Terrain Starter Kit and Clip System (https://www.drivethrurpg.com/product/404662/FlatD-Terrain-Starter-Kit). Contains sheets for two styles of city building as well as generic fronts to create multiples in a single city-scape. Brick on one side, stone on the other. Also includes bases for each... [click here for more] |
PEI Development |
$2.99
|
Data Targets are a set of science fiction miniatures objective markers for 3D printing. They have been designed for Corvus Belli's Infinity and its Infinity Tournament System (ITS) mission pack, but work well for Games Workshop's Warhammer 40,000 and a wide range of other games.
UPDATES
2021/11/30: Two new STLs have been added... [click here for more] |
Rocketship Games |
$4.00
|
Laser Engraved House Files
3d Printed Dungeon/City walls
Other terrain pieces. ... [click here for more] |
McNabb Games |
$4.95
|
Bone Floor
These are the 13 Bone floor tiles. They are compatible with all the rampage tiles.
Copyright©2017 www.printablescenery.com... [click here for more] |
www.printablescenery.com |
$7.95
|
Bones Pile
The bone pile can be scaled and printed to fit a wide variety of scenarios. Make yourself a bone-swamp scattered terrain or use to brighten up that old Lych’s crypt.
Copyright©2017 www.printablescenery.com... [click here for more] |
www.printablescenery.com |
$7.95
|
Small Fantasy Cottage
5 Part Fantasy Cottage Optional removable door Interior fully modelled
This product is delivered as a .ZIP file pack containing STL files for use on a home 3d Printer. The files are set to 28mm scale but can be rescaled before printing
Copyright©2017 www.printablescenery.com
See... [click here for more] |
www.printablescenery.com |
$7.95
|
Gnarly Tree Pack
4 Gnarly trees hand sculpted in Z Brush
These will print without supports, so turn supports off on your printer
Like all our models, these trees are scaleable, so you can print different sizes to make a whole forest.
All out models are original concepts. They are tested and optimised to print on home 3D printers.
Copyright©2017 www.printablescenery.com... [click here for more] |
www.printablescenery.com |
$8.95
|
Aztec Ruin
Despite being long forgotten, the remnants of the Aztec civilization can still be found to this day in the jungles of South America.
The Aztec Ruins can be printed as ruined or non-ruined structures. The complete model will fit on a 160mm x 160mm print bed. We have included the quarter sections for smaller printers. When you print the columns... [click here for more] |
www.printablescenery.com |
$9.95
|
Barbarian House
The icy, harsh climate of the northern tundra means that any houses built there must be sturdy, durable, and easy to maintain.The Barbarian house is a standalone model. It’s representational of a 12th Century Northern European home. It’s approximately 100mm x 150mm. You will need a 150mm wide print bed to print the complete model.
Using the guide holes... [click here for more] |
www.printablescenery.com |
$9.95
|
Dungeon Caverns print with a strong thin base so only uses about 15g of plastic per piece.
The zip file contains a 34 different dungeon cavern tile pieces.
They can be used to make a wide variety of maps for any dungeon
Print perfectly with no supports, no clean up and no mess.
Save printer time and filament and be quickly on your way to creating massive dungeons.
Copyright©2017 www.printablescenery.com... [click here for more] |
www.printablescenery.com |
$9.95
|
This is a complete set of 28 dungeon tiles set to 50mm base size - these will print much quicker than any other dungeon tile.
FAST PRINT - These use minimum plastic and print with a thin base
NO CLEAN UP - Designed for printing without raft and without supports
Compatable with our new APCOAPLYSE RUINS KICKSTARTER
The doors are designed as fixed... [click here for more] |
www.printablescenery.com |
$9.95
|
Gothic Abby
This is Gothic Abby. Suitable for a wide variety of theaters of war.
Also included are ruin components that can be scattered around it.
This is a large 4 part model to be printed in 4 parts and assembled.
Copyright©2017 www.printablescenery.com... [click here for more] |
www.printablescenery.com |
$9.95
|
Halfling Hole
Halfings tend to hollow out hills, and build their homes within them. The exact reason for this is not clear, but the end result is a cozy home.
The Halfling Homes are designed so you can use them as a stand-alone home or hill. We have designed them as a flat top with cliff sides style of hill, so you can stand your minis on top.
You... [click here for more] |
www.printablescenery.com |
$9.95
|
Viking Longship
The 28mm scale Viking longship can be printed as a complete model or it can be printed in 3 separate sections. It’s designed to fit 28mm models inside.
You will need to print it with (supports touching build plate) switched on because of the angle of the ‘Garboard Strake’ is very steep.
Also, the anchor must be printed with supports touching... [click here for more] |
www.printablescenery.com |
$9.95
|
Winterdale Bridge Cottage
Fantasy Cottage 5.0 5 Part Fantasy Cottage Optional removable door Interior fully modelled
Copyright©2017 www.printablescenery.com
See the video below for more information ... [click here for more] |
www.printablescenery.com |
$9.95
|
The War Tower
A set of modular sections that can construct a medieval fortified tower of any height.
Interiors have been modelled
Comes with a rocky base to stand on its own.
There is a removable door option
Prints without supports
All out models are original concepts. They are tested and optimised to print on home 3D printers.
Copyright©2017 www.printablescenery.com... [click here for more] |
www.printablescenery.com |
$9.95
|
Preorder all 9 sets for just $45 instead of the full price $90 until the end of Apryl!
click now: Dungeon-X Late pledge preorder bundle
A truly cost-effective, print-yourself dungeon that is spectacular but doesn't require any additional painting work and you can set it up in no time!
How it works:
Print walls
Print out the wall pieces and cut them out easily along... [click here for more] |
Lord Zsezse Works |
$10.00
|
Preorder all 9 sets for just $45 instead of the full price $90 until the end of Apryl!
Click now: Dungeon-X Late pledge preorder bundle
A truly cost-effective, print-yourself dungeon that is spectacular but doesn't require any additional painting work and you can set it up in no time!
How it works:
Print walls
Print out the wall pieces and cut them out easily along... [click here for more] |
Lord Zsezse Works |
$10.00
|
Winterdale Citadel Towers
Interior of each tower fully modelled
Optional doors and floor
Prints without supports
Two turret options
All out models are original concepts. They are tested and optimised to print on home 3D printers.
Copyright©2017 www.printablescenery.com... [click here for more] |
www.printablescenery.com |
$14.95
|
Steampunk Outpost
The outpost walls and floor are constructed using a steampunk dungeon tile style system.
The generator and control room both conform to the 50mm x 50mm dungeon tile system, so can fit in or on the square tiles
These are compatible with our fast printing dungeon tiles and the Dock’s dungeon tiles
The Winterdale buildings are designed to be glued and placed together.
This product... [click here for more] |
www.printablescenery.com |
$14.95
|
The Chapel
The Chapel is a standalone scenery piece designed for fantasy wargames and RPG.
The file size is set to 28mm but it can be scaled to 15mm.
The Chapel is part of the Winterdale 2 model range
This product is delivered as a .ZIP file pack containing STL files for use on a home 3d Printer. The files are set to 28mm scale but can be rescaled before... [click here for more] |
www.printablescenery.com |
$14.95
|
The Lighthouse
“After a long voyage a familiar lighthouse on the horizon offers the exhausted crew the first sight of home.”
The Lighthouse is a multipart model designed to be printed without supports. Each section has top locking pins, so that it can be easily stacked and taken apart.
It has interior details, wood grain and digitally hand sculpted brickwork.
This product... [click here for more] |
www.printablescenery.com |
$14.95
|
Winterdale War Cottage
Interior of each tower fully modelled
Optional doors and floor
Prints without supports
All out models are original concepts. They are tested and optimised to print on home 3D printers
Copyright©2017 www.printablescenery.com... [click here for more] |
www.printablescenery.com |
$14.95
|
Winterdale Blacksmith
Interior of each tower fully modelled
Optional doors and floor
Prints without supports
All out models are original concepts. They are tested and optimised to print on home 3D printers.
Copyright©2017 www.printablescenery.com... [click here for more] |
www.printablescenery.com |
$14.95
|
STL files to 3D print scenery for wargames and roleplaying games on any 3D printer !
You will get a link to download an archive containing STL files that will allow you to print 4 different houses, just load them in the software provided with your 3D printer and print them as many times as you like !
The STL files are printable on any 3D printer, we recommend using... [click here for more] |
Via Ludibunda |
Pay What You Want
|