| Title |
Publisher |
Price |
BOOM! KAPOW! WHAM! Need to see what area your power, grenade, or breath weapon effects? Try these simple yet effective files, which will let you measure the impact.
Separate Small, Medium, and Large Blast Templates as well as the Cone (Burst) Template compatible with Savage Worlds. Both the Large Blast Templates and Cone Template are available as single-piece print files and multiple-piece... [click here for more] |
Pinnacle Entertainment |
$2.00
|
OpenLOCK Six-gun Ammunition Tracker
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture in the below. YMMV.
\\
... [click here for more] |
Blessed Machine |
$3.00
|
OpenLOCK Bow & Arrow Ammunition Tracker
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture in the below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
Ammunition Trays for Westerner's Dash for Six-gun, Derringer, Buffalo Rifle, Lever-Action Rifle or Shotgun. OpenLOCK trays for Six-gun, Derringer, Buffalo Rifle, or Lever-Action Rifle. Shells for Six-gun, Derringer, Buffalo Rifle, Shot gun, and Lever-Action Rifle included.
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer... [click here for more] |
Blessed Machine |
$3.00
|
Cowboy Boot Dice Tower. Includes removable spur. Includes separate OpenLOCK base dice corral embossed with Boot Barn.
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture below. YMMV.
Attributions:
Boot created by https://www.cgtrader.com/bilrob and can be found here: https://www.cgtrader.com/free-3d-print-models/fashion/shoes/cowboy-boots-531ce6a8-a13e-4288-81d8-eac4c7b36610... [click here for more] |
Blessed Machine |
$3.00
|
Lever-Action Rifle Ammunition Tracker on OpenLOCK Base
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
OpenLOCK Shotgun Ammunition Tracker
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
Vintage Ammunition Box
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture in the below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
OpenLOCK Buffalo Rifle Ammunition Tracker
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture in the below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
Tombstone Name Plate with OpenLOCK Port Includes slot for US Poker Sized Dry Erase card.
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture below. YMMV
... [click here for more] |
Blessed Machine |
$3.00
|
Westerner's Dash with OpenLOCK Ports
This product includes the STL for the main dash and 3x3 and 3x6 blank spacer bases. Ammunition Trackers, Ammunition Traysm, Card, dice, and tokens are not included in this set. OpenLOCK clips are available at printable scenery.
Included with the STLs is a readme detailing printer settings to achieve the picture in the below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
Dynamite Dice Vault This product is for a set of digital STLs file for use with your 3D printer. Printed at the provided size, should allow thee internal space to fit ten 16mm dice.
Included with the STLs is a readme detailing printer settings to achieve the picture below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
Wanted Poster Name Plate with OpenLOCK Port Includes slot for US Poker Sized Dry Erase card.
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
Spittoon Saloon Dice Tower. Includes removable spur.
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
Lantern Ornament
This product is for a set of digital STLs file for use with your 3D printer. The base is designed to allow passing a typical incandescent Christmas tree light bulb into the lantern for extra fun.
Included with the STLs is a readme detailing printer settings to achieve the picture in the thumbnail. YMMV. ... [click here for more] |
Blessed Machine |
$3.00
|
Spittoon Spend Round Container/Dice Tower
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture in the thumbnail. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
Wanted Poster Name Plate with OpenLOCK Port Includes slot for US Poker Sized Dry Erase card.
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture in the thumbnail. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
Water Tower Dice Tower.
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer settings to achieve the picture below. YMMV.
... [click here for more] |
Blessed Machine |
$3.00
|
Game tokens: Six Shooter STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
This product is for digital STL files for use with your 3D printer.
These Templates are included:
All-in-one Small, Medium, Large Blast Template
Cone Template
Note: These are designed to use the negative space as a window to your gaming table to determine if targets are within the affected template area. You do not include the border of the template as part of the area that makes up the... [click here for more] |
Blessed Machine |
$3.00
|
I will Aim this round, here is my marker, remember I can't move. Are you still on Hold? Status Pointers to mark Status Conditions of Wild Cards and Extras for your Savage Worlds games.
You will be getting a 3D STL digital file to print your own models.
Included for this purchase are the following files:
Distracted Pointer
Vulnerable Pointer
Aim Pointer
Defend Pointer
Hold... [click here for more] |
Pinnacle Entertainment |
$2.00
|
Game Tokens: Bound Status STL This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Shaken Status STL This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Sheriff's Badge STL This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to... [click here for more] |
Blessed Machine |
$1.00
|
This product is for digital STLs file for use with your 3D printer. This STL set includes a triangular name tent with a raised area for a 2 inch piece of dry erase tape to put character names and other important information about the player's character. This component also has a slot for the player's current action card, and slots for 5 bennies. The tent also has a cavity accessed with a door... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Gear STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Pentagram STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens:Ammo STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the... [click here for more] |
Blessed Machine |
$1.00
|
That wall grants how much Cover? Those minions are surrounding you, each gains 3 Gang Up! Condition Blocks to mark Conditions of Wild Cards, Extras and more for your Savage Worlds games.
You will be getting a 3D STL digital file to print your own models.
Included for this purchase are the following files:
Cover 4-sided block (each side marked with appropriate penalties)
Range... [click here for more] |
Pinnacle Entertainment |
$2.00
|
Is that bad guy Vulnerable? Are you Distracted by this minion's Taunt? Status Pointers to mark Status Conditions of Wild Cards and Extras for your Savage Worlds games.
You will be getting a 3D STL digital file to print your own models.
Included for this purchase are the following files:
Blank Pointer (unmarked)
Distracted Pointer (marked "D")
Vulnerable Pointer (marked... [click here for more] |
Pinnacle Entertainment |
$2.00
|
This product is for digital STL files for use with your 3D printer. This STL set includes a pair of files that go together to form a rotating wheel. The bottom component is generic to display the Shaken and wound status numbers and the top includes two opitons. One with the Secret Agents of CROSS logo and the other is a dragon courtesy of Pinnacle Entertainment Group.
Included with the STL... [click here for more] |
Blessed Machine |
$4.00
|
This product is for a a digital STL file for use with your 3D printer. This STL set provides a tray to place a 25mm or 30mm miniature to provide a raised lip to snap on small colored clips to represent status defined by the GM/DM. The clips are interchangeable on either tray. Each tray has a small handle with a texture surface so you can push or pick up and move the mini with all the status clips... [click here for more] |
Blessed Machine |
$3.00
|
Need more Extras, allies, or enemies (even just as innocent bystanders) but don’t want to say the 3rd dime from the left (who’s left?) or the soda cap near my player? We have you covered!
These are numbered hexagon Tokens 3D print files designed for compatibility with Savage Worlds to be used as Extras. Can be used as Objective markers.
You will be getting a 3D STL digital file to... [click here for more] |
Pinnacle Entertainment |
$1.00
|
Brain Benny STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the picture... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Fireball STL This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Manhole Cover STL.
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Padlock STL.
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Power Port STL.
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00 $0.85
|
Game Tokens: Screw STL.
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Syringe STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Tools STL.
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Explosion STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Fan STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Fly STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens:Gas Can STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Lightbulb STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Living Sculpture STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to... [click here for more] |
Blessed Machine |
$1.00 $0.85
|
Game Tokens: Net STL.
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve the... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Pencil STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Game Tokens: Carrot STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
Log In 
