| Title |
Publisher |
Price |
Included in this title are stl models for 6x6 and 8x8 Dungeon and Cavern (revised) floors. For use with Fat Dragon Games Dragonlock terrain systems. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
A 3d-printable set of the seven dice (d4, d6, d8, d10, d12, d20, d100) useable for most games. This set used the 'Duen Rise' font for the faces
There are 2 sets of dice with different edge styles. The first is with a clean hard edge and the other has a small bevel. Both styles have supported versions.
Note: for personal use and 3d printing for re-sale is allowed.... [click here for more] |
Impossible Emporium |
Pay What You Want
|
OVERVIEW
The Flat-D Terrain System Starter Kit includes 3d STL files for 21 clips and several basic terrainpieces.
PAY WHAT YOU WANT
This starter set is set as "Pay What You Want", so feel free to pay as much or as little as you find value in the system.
CLIPS
You're granted a free license to print or have printed these clips in any amount of... [click here for more] |
PEI Development |
Pay What You Want
|
This massive 98 item set contains the basics to build a diverse catacombs dungeon. Included in this set are:
16 Wall Tiles (including transitions from normal FDG dungeons)
20 Floor Tiles (including transition tiles)
10 Doors (also includes 9 custom text lintels)
8 Corners (4 with Skulls along the wall base, 4 without)
8 Curved Walls (4 with Skulls along the wall base, 4 without)
8 Pillar Tiles (4... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Included in this set are 34 STL files corresponding to the status effects of the 5th Edition Dungeons and Dragons game.
Advantage, Charmed, Disadvantage, Deafened, Fatigued, Frightened, Grappled, Incapacitated, Invisible, Paralyzed, Petrified, Poisoned, Prone, Restrained, Stunned, Unconscious, Exhuasted Dying, Stabilized, Save, Fail, Misfire, and Concentrating are included. Flying 5, 10, 15, 20,... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
It's about giant buildings folks. That's what it really comes down to. That's all that's left when we go to see our ancestors. The Busy Little Dwarves Design Bureau understands the need to work hard today to ensure a better tomorrow for our little ones. After all, what do we really leave behind for our children but unnecessarily tall structures with incredible, intricate, and impractical architecture.... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
These 2x2 risers are designed to support the 4x4 Woodland and Riverside sets, including the new Riverside Waterfalls Set. Some of the cliffs and falls have unique heights. This set should provide proper support with any combination. These risers should support most FDG 4x4 tiles.
See Preview Here:
Recommended Print Settings are .2mm layer height and 10% infill, using the FDG terrain profile.
Cheers!... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Included in this free set are 6 models for secret rotating doors. The original rotating cavern door was included in the Centurion set, but with the release of the revised Cavern set from Fat Dragon Games, it seemed fitting to release a new version and update to the legacy. This rotating door rotates on the side rather than the middle.The Tavern tile rotates from the middle.
It is recommend to use... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
These racks will hold your FDG minis for transportation, and stack to take up less shelf space. Non-locking versions are also included. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
The Cobbled Bases are great if you want to see what the texture of the Cobbled Roads for Lord Cireneg's City are like. They are pieces cut from the same tiles so they will match the look perfectly. Solely made with cobble stones so you can add your own details as you wish. ... [click here for more] |
Devious Games |
Pay What You Want
|
This set includes some the earliest work from the Fat Dragon Community Crafters. This 44 item set contains everything you need to build Dragonlock Ships with masts, rails, and cannon decks.
Originally crafted by Squirrelhammer and later updated by Arenwel, this set represents the very best spirit of the FDG crafting community: Working together, inspiring each other, and sharing the benefits with... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Included in this set of 5 remixed tiles from Fat Dragon Games Dungeons and Market set are everything you need to add curtain doorways to your games!
Please see the included ReadMe for print instructions.
... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
I needed a way to add variety to my cavern waterways. Included are two diagonal cut water tiles, one a bit more narrow than the other. Enjoy! ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This set includes 2 Dragonbite tiles with tree stumps featuring either an axe or a two-man crosscut saw, 2 freestanding tree stumps with axe and saw and a pile of 2x2" pile of logs. The pieces were made using Fat Dragon Games models and items off of Thingiverse. Check the Read me file for more information.
For suggested print settings, check out the FDG Free Starter Set: https://www.drivethrurpg.com/product/197128/DRAGONLOCK-Ultimate-Free-Sample-Set... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Space Ships 3 is the next in Will Walker's line of beloved space terrain. 50+ STL 3d printable files are included in this Core Set, including everything you need to make a magnificent space ship or station. This is one of our patron supported sets. Over 500 additional models available to our patrons. You can find a link to the Patreon included in the Readme.
Alien Terrain Sets Alien... [click here for more] |
Aether Studios |
Pay What You Want
|
This set of 3D-printable terrain and miniatures, Pharaoh 6, was made by all of the Aether Studios artists together. Everyone contributed to this set, with Tia making the first textures, Jake making the animals, Colin with the Ram, Jeromy with scatter, Will and Nasos with the rest. Pharaoh has long been a collaborative experience and this set is the paragon of our progress so far. We hope you enjoy... [click here for more] |
Aether Studios |
Pay What You Want
|
This set of pyramid tiles was a collaboration between myself and user @arenwel on the Fat Dragon Games forums. He is a true friend and I thank him so much for helping me get where I am now.
There are two different tilesets included in this 26 item title:
1) External, which sits flush to the table and each exterior tile for aesthetics. Connects to Fat Dragon titles on 3 sides.
2) Internal, which... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
A elevated to lower waterfall transition requested by Jeff Kazules. May be more added to this in the future. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Overview:
Harvest Festival will never be the same again, with the Pumpkin Mimic lying in wait... Poor Johnny didn't know what to do when those sharp teeth sliced his hands clean off at the wrists...
"That'll teach him to try and carve a new mouth for ME" thought the mimic...
Contents:
You get 10 files - A plain pumpkin and its Mimic alter ego, on a 50mm base and as... [click here for more] |
LegendGames |
Pay What You Want
|
Looked in Gaoler Lous, and in Forum Prisons and couldnt find this, so I made it because I needed it, shared it in case someone else needed it. Does not include the doors, just the floors.
Doors and other walls can be found here:
https://www.drivethrurpg.com/product/242012/Best-of-the-Forums-Prison-Cells?term=forum+prison&test_epoch=0 ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This is a remix for the Tower of Terror set for integrating into the Woodland Sets. This does not include the rest of the tower. It only includes the door and 4 tiles shown in the cover preview. Enjoy!
This requires the purchase of the FDG Tower of Terror set to complete tower.
Recommended Print Settings:
Use official FDG Printing Profiles
Layer Height: .2
Infill: 5% ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Here's a micro Ghost, just in time for Halloween! Scaled to be used with the Micro Dungeons set. Should print without supports.
Print using FDG Cura mini settings, or equivalent.
Also includes a scaled up 32 mm version... if for some reason you wanted to print him that big.
Remember to use your clips on their sides for the Micro Dungeons, the side of the tile should look like it has a duck mouth... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Aztlan Starter is a 3D-printable Mesoamerican tileset by Aether Studios. Aztlan was our very first original set and this introductory set will give you everything you need to get started making dungeons. This set includes a unique floor, door, and stairs models not found in other sets. It is compatible with all other DragonlockTM models. In our World of Aach'yn, Aztlan is the... [click here for more] |
Aether Studios |
Pay What You Want
|
Included in this set of 3d printable terrain you will find 19 .STL models for creating dwarven dungeons. This tile set features walls, doors, corners, and corner pillars needed to make rooms of any size that connect to each other with Dragonbite clips.
This set has 3 styles of terrain:
Resized Legacy tiles match our original sculpts, but as the name suggests they are all slightly resized to match... [click here for more] |
Aether Studios |
Pay What You Want
|
This is just something I made while learning sculpting tools, I plan to release more random things I make as i make and refine them, you guys can just have fun with them. update: added "Alien Saucer" this only contains a single STL currently released The haunted painting can be printed but must be on the high detail settings and have your printer dialed in: note the fingers, horns and teeth tend... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Filing Cabinets (3d Printing: STL File) What you see is what you get- two versions of a standard, boring as heck looking filing cabinet, ready to print off and use in your miniatures role playing games. Are they interesting to look at? Not in the slightest. They are filing cabinets- they are not supposed to look cool. What's important to the characters is the stuff inside these things.... [click here for more] |
Fishwife Games |
Pay What You Want
|
A double wide timber post and a solid center post. I made these for my friend, Lou Anders becuase he had a need for them. The double wide post is good for shoring up wall connections. The center post is good for a support in a large room. The picture shows the double wide post. Both use the rounded pegs to secure them to floor tiles.
Dragonbite clips can be found here:
www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Wargaming ruler designed for use with Kill team from GW, which is why there are the shaped cut outs on 4 of the sides - each corresponding to the new distance icons. Each side is labelled with a number, and that number corresponds to the length of that edge in inches. Naturally, because each edge is numbered this can easily be used for any other games where measuring in inches is required. The longest... [click here for more] |
Fromthelab |
Pay What You Want
|
5 simple stalagmites on 50mm bases for monsters to hide behind in your caves! ... [click here for more] |
3DModels |
Pay What You Want
|
25mm round body markers for use as unrisen zombies, killed enemies, or whenever you need a corpse ... [click here for more] |
3DModels |
Pay What You Want
|
A simple spider web that prints without support for use in your game, sized to 40mm to fit open forge and most other terrain types, resizable in your slicer if necessary. 2 mirrored webs that can be used seperately or glued together for greater stablility. Adapted from a design by MakeALot. ... [click here for more] |
3DModels |
Pay What You Want
|
Gravestone for Tabletop or Boardgames ... [click here for more] |
3D-Druck-Gayer |
Pay What You Want
|
Included in this free bonus to the Tycho City mega set is a battery powered tealight capable Airbender statue. Originally crafted by prolific thingiverse artist OrangeWine, this statue has been carved out to allow a tealight to shine through in multiple areas.
Airbender Display by tychocity on Sketchfab
... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
ICRPG distance banana to measure distances during the game, in proper ICRPG fashion.
Printing Instructions:
Print at maximum layer height and at the highest speed you can. It is a simple thing to print. For two color prints, change filament at the right layer. Alternatively, you can print it single color and then paint it of course.
The default size is around 30cm,... [click here for more] |
Khanist Games |
Pay What You Want
|
That is a hit, Shaken but no Wound! Shaken Pointers to print to mark when your minis are Shaken. For your Savage Worlds games.
You will be getting a 3D STL digital file to print your own models.
Included for this purchase are the following files:
Shaken Pointer (Text)
Shaken Pointer (S)
The Full Text Shaken Pointer measures 2.5 inches long, 0.325 inches wide and 0.167... [click here for more] |
Pinnacle Entertainment |
Pay What You Want
|
Basic Crate (3d Printing STL File)
This file is a simple, easy to print storage/shipping crate that is kept intentionally very basic in design. Purposefully generic in appearance to allow mass placement or to add whatever post printing details you desire. Good fro many settings- from fantasy to pirate to modern.
Pay as you want- suggested selling price if you wish to pay is a mere... [click here for more] |
Fishwife Games |
Pay What You Want
|
3D Print File: Atomic Cactus
You stumble across the arid wasteland, pausing only to catch your breath and pray for a source of water. Finally, just as you are considering giving in and letting the two headed vultures feast, you spot it... a grouping of large, malformed cacti off in the distance. Your needs for liquid refreshment may be met yet... As you race towards the cacti you... [click here for more] |
Fishwife Games |
Pay What You Want
|
It’s time to roll up a random encounter off of one of the worlds many amazing encounter tables! Let’s see what you get… 2d4+2 (and you roll the full 10!) goblins, and 3 hobgoblins. Too bad you only have 4 goblin minis printed… but wait, you can just use the goblin minis for the hobgoblins, and use random other prints to track the regular goblins! Ok, so the fighter hits the giant rat, I mean... [click here for more] |
Reality Ward |
Pay What You Want
|
This is just a one page inspirational post featuring a vending machine for vampires,
How you might use one in your urban fantasy or sci-fi story, and what weirdness you might find inside one
Also included is a free STL file of the machine, with and without supports.
... [click here for more] |
Paul Cat |
Pay What You Want
|
D6 direction die for your games.
Use this to determine wind direction etc. without having to roll a regular D6 or D8 and figuring out which number is which direction.
Printing Instructions:
The default size of the die is 14.4 mm, which is an integer multiple of 0.16 mm Layer Height and is a good size for a die. Since all the faces are the same,... [click here for more] |
Khanist Games |
Pay What You Want
|
Retro Floor Model Television (3D Printing STL File)
A funky cool floor model tv from a bygone era. Easy to print and priced as "pay what you want" to give you a sample of what Fishwife Games and creator Dave Woodrum has to offer.
Recommended Print Dimensions: 34x17x21mm
Here's the recommended Cura settings that have worked for the designer's test print using the following:... [click here for more] |
Fishwife Games |
Pay What You Want
|
Professionally designed 3D model.
You get an .STL file for a Clockwork Skitter
Purchase once and print forever!
Print with affordable ABS or PLA plastic.
RECOMMENDED PRINT SETTINGS:
100 microns
extruder... [click here for more] |
Rocket Pig Games |
Pay What You Want
|
STL files to 3D print scenery for wargames and roleplaying games on any 3D printer !
You will get a link to download an archive containing STL files that will allow you to print 4 different houses, just load them in the software provided with your 3D printer and print them as many times as you like !
The STL files are printable on any 3D printer, we recommend using... [click here for more] |
Via Ludibunda |
Pay What You Want
|
ROVER BOT (3D Printing STL File) This Pay What You Want model is a simple little rover bot on treads... perfect for those scanning sentry drones that the heroes (or villains) send out into dangerous territory to analyze things and gather information. Small and disposable... but a bit cute. Download for free or give me a little donation... the choice is yours! Recommended Print DImensions:... [click here for more] |
Fishwife Games |
Pay What You Want
|
Included in this set of terrain you will find a large 6×6 Sky Islands House. Akara built this for her friends who often need a place to layover or a place to put up their feet and sit for a spell. It prints without supports and features tons of internal playing area. Dragonbite connections all for expansion into a massive cloud docks setting. We hope you enjoy this set, it was made by Colin Christenson... [click here for more] |
Aether Studios |
Pay What You Want
|
3D Print File: Office Chair This Pay What You Want file is a two piece office chair that is designed to fit typical 28 to 30mm miniatures. It can be easily resized to fit whatever scale you like. Default Parts Sizes: Base: 13x13x8mm Seat: 13.5x11x13.5mm Need help or recommended print settings? These are slow but here's what we often use in Cura with our Ender 3 and... [click here for more] |
Fishwife Games |
Pay What You Want
|
STL files to 3D print scenery for wargames and roleplaying games on any 3D printer !
You will get a link to download an archive containing STL files that will allow you to print 4 different houses, just load them in the software provided with your 3D printer and print them as many times as you like !
You can mix and match some parts with the designs from the Village... [click here for more] |
Via Ludibunda |
Pay What You Want
|
Very Basic Treasure Chest (3d Printing STL File)
This file is a simple, easy to print treasure chest that is kept intentionally very basic in design. Purposefully generic in appearance to allow mass placement or to add whatever post printing details you desire. Good fro many settings- from fantasy to pirate to modern.
Pay as you want- suggested selling price if you wish to pay is... [click here for more] |
Fishwife Games |
Pay What You Want
|
Basic Chair (STL 3D Printing File):
A basic chair... nothing fancy, simple and chunky in design which should make 3d printing reasonably easy. No particular genre or setting in mind as this chair design is planned to be the basic framework for future planned chairs.
Dimenson settings are for 30mm (Heroclix, D&D plastic minis, etc.) figures in mind, or O scale train figures (like... [click here for more] |
Fishwife Games |
Pay What You Want
|
Broken Column (STL 3D Printing Model File)
The broken column is a simple 3d piece that is useful for fantasy miniature gaming decor. This piece is offered as a "pay what you want" to help introduce you to Fishwife Games' new line of gaming miniature STL files.
The preset dimensions for this file is 25x25x28 mm. Feel free to adjust it as needed when you load the file into your favorite... [click here for more] |
Fishwife Games |
Pay What You Want
|
Log In 
