| Title |
Publisher |
Price ▲ |
Professionally designed 3D model.
You get an .STL file for a Chest
Purchase once and print forever!
Print with affordable ABS or PLA plastic.
RECOMMENDED PRINT SETTINGS:
100... [click here for more] |
Rocket Pig Games |
$1.88
|
Rocket Pig Games has launched their first Kickstarter. It went live on 10/25 and was funded in ONLY 3 MINUTES! There are three core sets and LOADS of stretch goals and add-ons. We've got deluxe creatures, furnishings, short walls, and MUCH more. Go check it out here: https://www.kickstarter.com/projects/rocketpiggames/tilescape-dungeons
RECOMMENDED PRINT SETTINGS:
100... [click here for more] |
Rocket Pig Games |
$1.88
|
Rocket Pig Games has launched their first Kickstarter. It went live on 10/25 and was funded in ONLY 3 MINUTES! There are three core sets and LOADS of stretch goals and add-ons. We've got deluxe creatures, furnishings, short walls, and MUCH more. Go check it out here: https://www.kickstarter.com/projects/rocketpiggames/tilescape-dungeons
RECOMMENDED PRINT SETTINGS:
100... [click here for more] |
Rocket Pig Games |
$1.88
|
Included in this set are 4 new FDG remixes allowing for more complex room designs. The Curved T-Wall comes in 4 flavors: Vanilla, Torch, Ruins, and Dank Catacombs.
... [click here for more] |
Fat Dragon Games |
$1.99
|
3D PRINT IT SERIES: ALIEN RELIC: POWER CUBE
After learning that the wicked Doctor Malformer has looted the ancient alien crash site the heroes track him down to the base. What was Doctor Malformer trying to steal and what does he plan to do with it? Something awful and sinister no doubt! As the heroes defeat a dozen of his minions and make their way into his research lab... [click here for more] |
HAZARD Studio |
$1.99
|
3D PRINT IT SERIES: ANATOMY SCANNER
Did your hero break a few ribs in the last battle? Bringing in the mayor to the base for a visit but you aren’t too sure that he’s not an imposter? Is that new recruit carrying a hidden weapon? Is your new girlfriend really an alien in disguise? Stand in front of the Anatomy Scanner and all your questions will be answered!
The... [click here for more] |
HAZARD Studio |
$1.99
|
3D PRINT IT SERIES: BIO VAT
"I stood back in horror as the vat's seal released with hiss. Glowing greenish fluid began to leak out the sides as the thing forced its way out... scaly, slimy, and obviously unnatural, the being snarled at me with its nightmarish face."
The Bio Vat is a perfect addition to any super hero or villain base. This model also works perfectly for a variety... [click here for more] |
HAZARD Studio |
$1.99
|
3D PRINT IT SERIES: DIGITAL ENERGY BLASTER
You and your team mates burst into Dr. Megadata's lab only to be blown back 50 feet by a sudden burst of colorful pixelated energy. Staggering to get up you see your enemy standing behind a computer console. Connected to this electronic work station is a massive cannon. You barely have time to get back on your feet before another... [click here for more] |
HAZARD Studio |
$1.99
|
3D PRINT IT SERIES: HYPER FABRICATOR
Ripped up costume? Broke laser rifle? Need a new remote control for your robotic web cannon? No problem! Just press some buttons on the hyper fabricator, load in the raw materials, and let this piece of marvelous machinery do all the work!
The Hyper Fabricator is a perfect addition to any super hero or villain base. It is also perfect... [click here for more] |
HAZARD Studio |
$1.99
|
3D PRINT IT SERIES: MASTER BASE COMPUTER "Warning! Mega powered aliens approaching.... the Earth needs your help!" So you've got a super base but you're still stuck with that hand me down laptop you used back in college... that's no way to be a super hero! Time for an upgrade!
The Master Base Computer is a perfect addition to any super hero or villain base. It is also perfect for a variety of... [click here for more] |
HAZARD Studio |
$1.99
|
3D PRINT IT SERIES: MED BED
When there's a fight there's bound to be a few wounds. Any sensible super base is bound to have a medical wing. What is a medical wing without high tech beds? Nothing! This two piece 3d print model is a futuristic looking medical bed. Just the kind of thing your hero needs after they get a few ribs cracked from that last battle.
This high... [click here for more] |
HAZARD Studio |
$1.99
|
3D PRINT IT SERIES: MUTANT TOADSTOOL
The air is thick with irritating spores but the smell is alluring…. Almost too alluring. You find yourself unwillingly drawn in, walking closer and closer to the strange lumpy toadstool… Suddenly, as you get closer the thick, root like appendages burst up through the ground around the mushroom as bumps on the fungi’s cap reveal themselves... [click here for more] |
HAZARD Studio |
$1.99
|
3D PRINT IT SERIES: OBSOLETE DATA SYSTEM
Its been over 40 years since a living soul has infiltrated the forgotten lab of Doctor Phasmaro. As you brush away the dusty cobwebs you find the hidden entrance to the main computer room. Thanks to Phasmaro's experimental reactor the power is still on here. Lights blink and flash from a massive electronic structure that was the... [click here for more] |
HAZARD Studio |
$1.99
|
3D PRINT IT SERIES: ORGAN OF DOOM
Strange organ music echoes down the hallway, making you strangely dizzy and unable to focus. As you stumble your way into the main chamber you witness the presence of the villainous Master Tempo up on a grand stage. This arch criminal is playing away at a strange looking musical organ. Surrounding the organ are large amplifiers. The blast... [click here for more] |
HAZARD Studio |
$1.99
|
3D PRINT IT SERIES: POWER AMPLIFIER
Baron Centauri stands within the center of the strange device, laughing manically as rays of energy pour out all over him. "He's growing stronger from that thing!", one of our team mates shout at you, "We've got to stop him!"
The power amplifer is a bulky base device that temporarily (permanently?) increases the abilities of anyone... [click here for more] |
HAZARD Studio |
$1.99
|
3D PRINT IT SERIES: SUPERVISOR STATION TERMINAL An unsuspecting security officer nods at you as you walk by in your newly acquired stolen uniform. You fake an expression of confidence as you nod back, careful to hide the nervousness building up inside you. A few paces further down the hall and to the left you spot what you are looking for… an unattended computer terminal. As you... [click here for more] |
HAZARD Studio |
$1.99
|
3D PRINT IT SERIES: TECH TERMINAL
"Sneaking around the corner I was able to get a good look at what lied ahead of me... The massive hallway connecting to the main lab was bristling with technology. A few of Mad Scarab's costumed technicians were working at computer terminals that appear to be linked into the main system...." You're not gonna let those grubby minions filthy up... [click here for more] |
HAZARD Studio |
$1.99
|
Here are some basic cavern edges. They are short enough for overlapping cavern levels. Check out the preview below and enjoy!
Set Preview:
:lang="en">Cavern Edges Set
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well. Cheers! ... [click here for more] |
Fat Dragon Games |
$1.99
|
This is a collection of the 6 heroes from The Fall, and the 4 bosses from the fall. The heroes are Xavier, Meg, Mrs Smith, Earl, Carter, and Wesley. The bosses are Bruce Bruce, Joe John, The Alpha Wolf, and the Gatekeeper. All characters are all in the 30mm range. ... [click here for more] |
Tha Den Gaming |
$1.99
|
Warp Gate Portal Door Marker. Forget boring old disk markers, get an objective marker that looks good and makes sense.
This Warp Gate Portal Door Marker has been designed to be easily printed with minimal supports and to have lots of details for the painters out there. This comes as three files as it is available in three versions.
It wouldn't look out of place in any bunker, spacecraft... [click here for more] |
SPQRWargames |
$1.99
|
Included are seven Eight 3d models in .stl format of Herrinbone Brick dungeon and village street tiles. These tiles print great with layer height at .2 or less. A wonderful addition to any village, town, or city encounter. Two of the old legacy "Long Brick" are also included, but not shown on the cover.
Tiles are mounted to Fat Dragon Games Dragonlock tile system bases. ... [click here for more] |
Fat Dragon Games |
$2.00
|
This collection of 1 Inch Miniature Bases is perfect for matching with your own miniatures that need an outdoor, natural base.
Bases include Grass, Rough, Rocky, Snow, Dungeon, Cavern, Wood, and Cobblestone textured Bases.
Crafted upon request of community member @Olaf on the Fat Dragon Games Forums. ... [click here for more] |
Fat Dragon Games |
$2.00
|
Included in this download are .stl files for 16 different landscape textures, 4 each of Grass, Rough, Rocky, and Snow Drift terrain.
Each one is mounted to DRAGONLOCK™ Ultimate bases for use with other Fat Dragon Games tiles!
... [click here for more] |
Fat Dragon Games |
$2.00
|
Included in this model are 8 9 models for Fat Dragon Games Dragonlock system. These 2" Separate Walls are available in the following flavors.
Alcove (added 9-24-18)
Cthulu Brain
Cobra
Eye Symbol (Pristine)
Eye Symbol (Ruined)
Web Crests
Spider Crests
Large Spider
5e Medal
Many thanks to the contributing artists who lent very wonderful textures under the lovely CC-AO License.Elazro,... [click here for more] |
Fat Dragon Games |
$2.00
|
Rocket Pig Games has launched their first Kickstarter. It went live on 10/25 and was funded in ONLY 3 MINUTES! There are three core sets and LOADS of stretch goals and add-ons. We've got deluxe creatures, furnishings, short walls, and MUCH more. Go check it out here: https://www.kickstarter.com/projects/rocketpiggames/tilescape-dungeons
RECOMMENDED PRINT SETTINGS:
100... [click here for more] |
Rocket Pig Games |
$2.25
|
Rocket Pig Games has launched their first Kickstarter. It went live on 10/25 and was funded in ONLY 3 MINUTES! There are three core sets and LOADS of stretch goals and add-ons. We've got deluxe creatures, furnishings, short walls, and MUCH more. Go check it out here: https://www.kickstarter.com/projects/rocketpiggames/tilescape-dungeons
RECOMMENDED PRINT SETTINGS:
100... [click here for more] |
Rocket Pig Games |
$2.25
|
Included in this set are 4 new Ruined Dungeon Walls and 2 new Ruined Dungeon Corners. Thank you to Tom for the FDG CC program that allows these wonderful remixes.
... [click here for more] |
Fat Dragon Games |
$2.99
|
Welcome to the end of times! In this stl Pack you get Dave and Mike to fight the zombie horde. The horde includes Zombie, Zombie Dog, Zombie Brute, Zombie Mother, The Butcher, ZOmbie cat, and the Zombie Bride. Download print and enjoy! ... [click here for more] |
Tha Den Gaming |
$2.99
|
Middle Kingdoms Miniatures are hand sculpted miniatures for use in any tabletop RPG, Skirmish or Wargame. When I started playing RPGs with my family, I really wanted 3D miniatures that had a storybook style similar to middlegrade fiction illustrations, but could not find anything that matched. As a rsult, I taught myself how to digitally sculpt and 3D print my own. I hope they find... [click here for more] |
Middle Kingdoms Adventure & Trading Co. |
$5.99 $2.99
|
Looking to add some snazzy scatter terrain to your modern or near-future tabletop games? These high-resolution models will fit into any warehouse, construction site, or shipping hub you throw them at.
Currently included:
Cinder blocks
Wooden pallets
55 gallon drums (open and closed)
Large-sized cable reels (with split version for no-support printing)
Pallets stacked with 55-gallon drums and cinder... [click here for more] |
Nerdhaus Industries |
$2.99
|
The FDG Village 4x4 street tiles, gridded upon request for the FDG Facebook Community. A special thanks the Raphael Fellipe for his help test printing. Includes 9 4x4 tiles from the Village Streets.
... [click here for more] |
Fat Dragon Games |
$3.00
|
Four large insectoid warriors for your tabletop fantasy adventure games. Each is in a different pose and comes with a textured base.
One or more textures on the bases presented in this pack of these 3d models have been created with photographs from Textures.com. These photographs may not be redistributed by default; please visit www.textures.com for more information.
nonPareil institute is committed... [click here for more] |
nonPareil |
$3.00
|
Three large, flabby (but loveable) trash eating monsters for your tabletop. They are reminiscent of Otyughs in D&D and are perfect as a wandering monster or surprise encounter in your your tabletop fantasy adventure games. Each is in a different pose and comes with a textured base.
One or more textures on the bases presented in this pack of these 3d models have been created with photographs from... [click here for more] |
nonPareil |
$3.00
|
A collection of four different giant winged apes for your tabletop games. Each is in a different pose and the set comes with a 50mm textured base.
One or more textures on the bases presented in this pack of these 3d models have been created with photographs from Textures.com. These photographs may not be redistributed by default; please visit www.textures.com for more information.
nonPareil institute... [click here for more] |
nonPareil |
$3.00
|
Rocket Pig Games has launched their first Kickstarter. It went live on 10/25 and was funded in ONLY 3 MINUTES! There are three core sets and LOADS of stretch goals and add-ons. We've got deluxe creatures, furnishings, short walls, and MUCH more. Go check it out here: https://www.kickstarter.com/projects/rocketpiggames/tilescape-dungeons
RECOMMENDED PRINT SETTINGS:
100... [click here for more] |
Rocket Pig Games |
$3.38
|
The Future Worlds Scatter Terrain: Ruined Building #1 is the first in a set of ruins and buildings designed to be thrown down onto your wargaming table to provide cover, objectives and points of interest to your wargame of choice. This model will be suitable for most modern or sci-fi wargames and is scaled (as default) for 28mm figures.
This product contains three separate models: a large ruined... [click here for more] |
Arid Hills Gaming |
$3.50
|
Durty roads for Lou Anders. Straight, Curvy, fourway, and threeway versions of durty and snowy roads. Also including a durty to brick transition tile. Print at .1-.2, with 0-10% infill. ... [click here for more] |
Fat Dragon Games |
$3.50
|
Professionally designed 3D model.
You get an .STL file for a 2" column, a 3" column, a 4" arch, and a ruined column
Purchase once and print forever!
Print with affordable ABS or PLA plastic.
... [click here for more] |
Rocket Pig Games |
$3.50
|
Extra Truck Chassis is a collection of 3D printable files that includes two new chassis, a tracked option, a trailer, and additional detail pieces that can be added to our truck kits for more variety. They have been designed to print easily and to work with 28-32mm scale figures.
NOTE: This is an EXPANSION KIT, and will... [click here for more] |
Tabletop Terrain |
$3.80
|
Asian Altars, Pillars, and Basins is a Fat Dragon Games Dragonbite Community Creator set with 17 brand new .stl files to add an oriental theme to your games.
The full list of files includes:
2x2 Asian Floor
2x2 Pool Tile (Asian and FDG Dungeon floors)
2x2 Spiral Dais (Asian and FDG Dungeon floors)
Dragon Pillars (Left and Right)
Dragon Basins (Left and Right)
Torii Shrine for Gong
Dragon... [click here for more] |
Fat Dragon Games |
$3.99
|
Glad tidings are here! No more shall the long-suffering GMs of this world toil with no escape. Never again shall they be forced to endure session after session of murder-hobo antics. Now, no matter what Fat Dragon Games dungeon your players have seen fit to debase, you'll have the solution. “Rocks Fall, Players Die” is the newest and last Community Creator set you’ll need for... [click here for more] |
Fat Dragon Games |
$3.99
|
This set of 3D-printable space tiles complements the existing Spaceships 1 and Spaceships 2 line of Terran ship tiles, and the Alien Spaceships and Alien Invasion sets of alien ship tiles. It includes several custom STL models for each, expanding the options available for both alien and terran ships.
RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm recommended, 0.1mm for smoother... [click here for more] |
Fat Dragon Games |
$3.99
|
Professionally designed 3D model.
You get an .STL file for six different sheet metal walls. Three narrow and three wide.
Purchase once and print forever!
Print with affordable ABS or PLA plastic.
RECOMMENDED... [click here for more] |
Rocket Pig Games |
$4.13
|
Extra Truck Bodies is a collection of 3D printable files that includes four new bodies that can be added to our truck kits for more variety. They have been designed to print easily and to work with 28-32mm scale figures.
NOTE: This is an EXPANSION KIT, and will require owning one of our other kits like the Military Truck, Prospector Rover, or Outpost Utility to use. The... [click here for more] |
Tabletop Terrain |
$4.40
|
Single Wide City (A Print and Play Board Game for 2 to 4 Players) Welcome to Single Wide City, the board game where you the players compete for dominance in the trailer court business. Each player takes on the role of a landlord with a barren trailer court waiting to be filled with single wide mobile homes. As you build up your rental properties you will encounter... [click here for more] |
Fishwife Games |
$4.50
|
Extra Leopard Turrets is an EXPANSION KIT of 3D printable files that contains two new Leopard style turrets that can be used with our LAV and Tank kits.They have been designed to print easily in FDM and resin and to work with 28-32mm scale figures.
Components
The Extra Leopard Turrets kit has core components and variant pieces. Included are:
The distinctive 'arrow... [click here for more] |
Tabletop Terrain |
$4.80
|
Professionally designed 3D model.
You get an .STL file for a Spinning Trap, an Eldritch Mouth Trap, a Corner Trap, and The Grinder!
Purchase once and print forever!
Print with affordable ABS or PLA plastic.
RECOMMENDED PRINT SETTINGS:
100... [click here for more] |
Rocket Pig Games |
$4.88
|
Here are a few LED options to go with the cavern deck system. Check out the preview below and enjoy!
Set Preview:
:lang="en">Cavern Decks LED Set
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well. Cheers! ... [click here for more] |
Fat Dragon Games |
$4.99
|
These are like the basic cavern edges, except more dynamic... Bring your multilevel cavern to life with a variety of edge options. Check out the preview below and enjoy!
Set Preview:
:lang="en">Dynamic Cavern Edges Set
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well. Cheers! ... [click here for more] |
Fat Dragon Games |
$4.99
|
Straight from the pages of Savage Company: Machines of War, the bruiser class light war machine is the walking tank of choice for the titular orcs.
This STL collection comes in both unsupported and pre-supported formats. ... [click here for more] |
SHM Publishing |
$4.99
|
Log In 
