| Title |
Publisher |
Price |
Interested in expanding your collection of pulp era RPG sourcebooks and action into the Neo-Pulp world of Haven: City of Bronze D20 Modern, but you don’t know what supplement to pick up first? Never fear! Now you can get the Haven: City of Bronze Index and find out what is in ALL of the supplements for the Haven: City of Bronze Neo-Pulp setting. All this for the low price of FREE! ... [click here for more] |
LPJ Design |
$2.29
|
Haven: Full Metal Zero Complete Index lists all of the sourcebooks and material going to be used in the upcoming new D20 Modern setting, Haven: Full Metal Zero. This index also lists all of the feats in the Covert Ops Feat sourcebook in its entirety. And best of all it is free. ... [click here for more] |
LPJ Design |
$2.29
|
The ultimate guide for keep up-to-date and in track with all the ideas, items and rules that have come out for the Haven: Full Metal Zero line all in one simple place. Effortlessly with this index you can find every little interesting thing for the Haven: Full Metal Zero line. ... [click here for more] |
LPJ Design |
$2.29
|
HANDGUNS of WWII
System: D20 Modern/Pathfinder Genre: World War II/Early 20th century Interior Illustrations: 29 Onscreen Page Count (Including cover and OGL):17 Printer-Friendly Page Count (Including title and OGL):14
This file covers 32 common and uncommon handguns of the early 20th century.
While... [click here for more] |
Bloodstone Press |
$1.49
|
The world of Contagion is a dark and terrifying place. On the surface it is no different than the world you and I live in. Most people go on about their lives never realizing the terrors that walk among them.
Despite humanity’s vast ignorance, the horrors are there. Angels demons, gods and Hellspawn make war in the shadows. Clergy and Slayers rise from the human flock to protect their brethren... [click here for more] |
Aegis Studios |
$12.95
|
print on demand now available!!
Table of Contents
Skills
4
New Classes
10
Equestrian Show Rider
11
Equestrian Rider
12
Monster Hunter
13
Party Animal
14
The Performer
15
Phantasmagon
16
ROTC Cadet
17... [click here for more] |
Bloat Games |
$4.99
|
This set includes 15 prison bar tiles from the fan-created section of the Fat Dragon Games forums. The tiles include:
Tiles with bars along the edge of the base (straight, corner, doorway, etc.)
Tiles with bars across the center of the base (straight, corner, intersections, doorway, etc.)
Dungeon Wall tiles with bars coming out (along both center and edges) and with bars along opposite edge
All... [click here for more] |
Fat Dragon Games |
$5.99
|
The initial 3D-printable Chasm release brought much more appealing models to add a lower level of caverns to your maps. Several supporting sets have included various types of bridges over the chasm, from wooden to stone. But, what about a more natural crossing? This set includes several chasm and cavern pieces with stepping stone columns to traverse the chasm. (Don’t worry, the stirges won’t... [click here for more] |
Fat Dragon Games |
$5.99
|
This set of 3D-printable terrain expands on the Fat Dragon Games line of cavern tiles with water alongside walls and corners -- based on the latest style of FDG cavern walls, floors, and water. It includes a waterfall to support maps with water on multiple levels, such as the Cragmaw Hideout from the introductory 5e Lost Mine of Phandelver adventure.
(If you want the same models with wavy water... [click here for more] |
Fat Dragon Games |
$14.99
|
Chasms are great, but how about spicing up a cavern map with an underground river or lake? This set of 3D-printable STL models combines the Chasm walls with water bases, to provide chasms with a watery bottom. It includes an entrance and two varieties of water spray, along with multiple chasm walls and corners.
As before, the chasm models in this set stick up far enough to make a smooth edge with... [click here for more] |
Fat Dragon Games |
$10.99
|
Chasms are great, but how about spicing up a cavern map with an underground river or lake? This set of 3D-printable STL models combines the Chasm walls with water bases, to provide chasms with a watery bottom. It includes an entrance and two varieties of water spray, along with multiple chasm walls and corners.
As before, the chasm models in this set stick up far enough to make a smooth edge... [click here for more] |
Fat Dragon Games |
$10.99
|
Though there are a number of watery sets -- indoor, outdoor, and underground -- it seems a little boring to have just plain water tiles “in the middle.” This set of 3D-printable STL models spices up a river or lake with some wreckage that might suggest past (or future!) events. Kraken not included.
Note: there are two styles of water tiles in the Fat Dragon Games... [click here for more] |
Fat Dragon Games |
$4.99
|
Wet caverns are fun, but what natural cavern features an entirely flat, single-level layout? This selection of 3D-printable STL models adds a mid-level elevated surface alongside your underground rivers and lakes. Combine with the starter Wet Caverns 2 set and the elevated pieces in FDG Cavern Expansion 1 to create ever-more-elaborate wet caverns with elevated sections! (The sample layout... [click here for more] |
Fat Dragon Games |
$10.99
|
This set of 3D-printable STL terrain expands on the Fat Dragon Games line of cavern tiles with water alongside walls and corners -- based on the latest style of FDG cavern walls and floors. It includes a waterfall to support maps with water on multiple levels, such as the Cragmaw Hideout from the introductory 5e Lost Mine of Phandelver adventure. However, this set uses the original wavy-style water,... [click here for more] |
Fat Dragon Games |
$14.99
|
A haunted house or spooky graveyard deserves more than a set of pristine walls… So this set of 15 3D-printable STL models builds on the FDG Cemetery set and the freestanding wall from FDG Village Items 2 to bring you more worn and busted-up walls. Perfect for that house that just hasn’t been tended for a decade or two… at least, not by living caretakers.
Note that the walls and posts here... [click here for more] |
Fat Dragon Games |
$9.99
|
This set of 3D-printable STL terrain was inspired by the Dungeon of the Dead Three. That’s a basement dungeon, where the low points of the dungeon are flooded by foul-smelling water from the nearby sewers.
This set is designed so the sewer-flooded level is below a dry level of dungeon. There are two styles of tiles in the set to make this work (you can use either or both):
3” high... [click here for more] |
Fat Dragon Games |
$11.99
|
This set of 3D-printable STL models builds on the starter Wet Caverns 2 set to add support for narrow streams. Inspired by the entrance to the Cragmaw Hideout (shown on the adventure map as a 10’ wide cave corridor, half dry ground and half water), the models in this set allow streams up close to walls, streams in the middle of flat ground, and transitions in between.
(For the same models... [click here for more] |
Fat Dragon Games |
$14.99
|
This set of 3D-printable STL terrain builds on the starter Wet Caverns 2 set and expansion Wet Cavern 2: Streams to add a higher level near your narrow streams. Inspired by the entrance to the Cragmaw Hideout (a multi-level map with steps alongside streams), this set includes steps, platforms, and elevated terrain near streams.
(For the same models with a wavy water texture built into the models,... [click here for more] |
Fat Dragon Games |
$8.99
|
Fat Dragon Games recently updated their line of cavern tiles, including redesigning the cavern floors-with-water in their Cavern Expansion 1 set. However, all the water areas are now completely flat. That’s fine if you intend to add your own water effects after the fact, but if you’d prefer to include the water texture in your prints, there was not an option to take advantage of the redesigned... [click here for more] |
Fat Dragon Games |
$5.99
|
This set of 3D-printable STL models builds on the starter Wet Caverns 2: Wavy Walls set to add support for narrow streams. Inspired by the entrance to the Cragmaw Hideout (shown on the adventure map as a 10’ wide cave corridor, half dry ground and half water), the models in this set allow streams up close to walls, streams in the middle of flat ground, and transitions in between.
(For the... [click here for more] |
Fat Dragon Games |
$14.99
|
This set of 3D-printable STL terrain builds on the starter Wet Caverns 2: Wavy Walls set and expansion Wet Cavern 2: Wavy Streams to add a higher level near your narrow streams. Inspired by the entrance to the Cragmaw Hideout (a multi-level map with steps alongside streams), this set includes steps, platforms, and elevated terrain near streams.
(For the same models with flat water areas... [click here for more] |
Fat Dragon Games |
$8.99
|
This set of 3D-printable STL terrain brings water to your half-height caverns! Now you can create underground rivers, pools, and lakes up close to lower walls and entrances. Mix with pieces from other sets such as FDG Cavern Expansion 1, Low Corridors, and Low Streams to add even more variety to your half-height cavern water layouts!
Why half-height walls? These lower walls are:
Faster to print
Easier... [click here for more] |
Fat Dragon Games |
$11.99
|
This set of 3D-printable terrain adds on to sets like Wet Caverns 2 and Wet Caverns 2: Low Walls so you can join up multiple wet caverns, using wet corridors in between! Compared to full-height cavern pieces, these lower wet corridors are:
Faster to print
Easier to see over
Easier to place miniatures close to -- especially important for tight corridors!
These corridors work well with both half-height... [click here for more] |
Fat Dragon Games |
$9.99
|
This set of 3D-printable STL terrain expands on Wet Caverns 2: Low Walls so you can build narrow streams through your half-height caverns. Inspired by the entrance to the Cragmaw Hideout (shown on the adventure map as a 10’ wide cave corridor, half dry ground and half water), the models in this set allow streams up close to walls, transitions from streams to thicker rivers or lakes, and transitions... [click here for more] |
Fat Dragon Games |
$10.99
|
This set of 3D-printable STL terrain joins up multiple wet caverns, using wet corridors in between! These models have a wavy water effect built into the print, to fit with other wavy-water cavern pieces. (If you want flat water tiles to add your own water effect, see Wet Caverns 2: Low Corridors)
These lower corridors are:
Faster to print
Easier to see over
Easier to place miniatures... [click here for more] |
Fat Dragon Games |
$9.99
|
This set of 3D-printable STL terrain expands on Wet Caverns 2: Wavy Low Walls so you can build narrow streams through your half-height caverns. Inspired by the entrance to the Cragmaw Hideout (shown on the adventure map as a 10’ wide cave corridor, half dry ground and half water), the models in this set allow streams up close to walls, transitions from streams to thicker rivers or lakes, and transitions... [click here for more] |
Fat Dragon Games |
$10.99
|
Like the core Flooded Dungeons set, this 3D-printable STL terrain was inspired by the Dungeon of the Dead Three. That’s a basement dungeon, where the low points of the dungeon are flooded by foul-smelling water from the nearby sewers.
This set adds new ways to connect your flooded dungeons to caverns and dry dungeons, as well bringing in a mid-corridor doorway and pipe walls to increase the,... [click here for more] |
Fat Dragon Games |
$8.99
|
This set of 3D printable STL models provides roofs for small houses, such as the buildings in the port village in the Kobold Docks map by Dyson Logos. This includes a pyramid-shaped roof for 4x4" buildings, and 2" roofs for small C, L, or T shaped buildings. These roofs can be used in conjunction with a number of FDG village sets, though the models are based on the roofs from... [click here for more] |
Fat Dragon Games |
$7.99
|
This set of 3D-printable STL terrain brings watery pools and streams to dungeon layouts. It includes two styles of wet dungeons, one with a brick edge and another with a rougher natural edge.
The plain water tile that matches the water texture used in this set can be found in FDG Dungeon Hazards & Traps.
Sample layouts in each style:
Recommended Print Settings:
Layer Size:... [click here for more] |
Fat Dragon Games |
$9.99
|
This set of 3D-printable STL terrain continues the Wet Dungeons line of watery pools and streams for dungeon layouts. It expands the selection of dungeon walls on brick-style wet dungeon floors, including more wall and post models as well as ruined wall models and a special bonus model. All these models can be mixed with other Wet Dungeons sets to make more elaborate layouts.
The plain... [click here for more] |
Fat Dragon Games |
$9.99
|
SURVIVE THIS!! What Shadows Hide - Core Rules
STWSH is a modern horror and investigation game in the same vein as the X-files, Supernatural and Hellboy. In the game you will go head to head with evil secret organizations, the occult, supernatural and cosmic horrors.
STWSH was written by Josh Palmer and developed by Eric Bloat for Bloat Games, and feature beautifully horrific cover art by Phil Stone.... [click here for more] |
Bloat Games |
$9.99
|
SURVIVE THIS!! What Shadows Hide - Cthulhu Sourcebook
Requires SURVIVE THIS!! What Shadows Hide Core Rules to play.
Races - New
Cosmos Cats 4
Classes – New
Archeologist 8
Priest of the Darkness 10
Priest of the Light 12
Priest of the Mother 14
... [click here for more] |
Bloat Games |
$9.99
|
![Esper Genesis Core Bundle [BUNDLE]](https://d1vzi28wh99zvq.cloudfront.net/banners/b_10141_20230105040110.gif)
Log In 
