Title |
Publisher |
Price |
I am so excited to offer this set! I got sick of having loose scatter on a battle mat and so decided to make an FDG community forest tile set. All tiles are 4x4 anddesigned in a way that preserves the grid without adding obnoxious lines. This set comes with many unique tiles. Printing just 1 of each tile provides over 3 and half square feet of play. When combine the other Woodland and Riverside sets,... [click here for more] |
Fat Dragon Games |
$19.99
|
Light up column with 2x2 dragonlock campatable base and one without a base. Done in the Realm of the Mountain King style from Fat Dragon Games.
Dragonbite clips can be found here:
www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20
Recommened Settings:
Layer Height: 0.2mm or less
Infill: 10%, 5%... [click here for more] |
Fat Dragon Games |
$1.00
|
 I am really excited to share these LED Dungeon tiles. This is a first set of many to come. If you are familiar with the original FDG LED Torch Wall, then these will be a no brainer to assemble. This set includes a variety of tiles including an angled torch wall, scrying pool and a variety of braziers. Check out the previews!
... [click here for more] |
Fat Dragon Games |
$14.99
|
An expansion set for the posts of village buildings 1 and 2 with some pillars included this set contains wooden and stone Double posts in many different combinations as well as a Pillar for both wood and stone.
This set contains 20 variations of posts and pillars
This product was created under license. Dragonbite Community Creator, Dragonlock, and Dragonbite are trademarks of Fat Dragon Games... [click here for more] |
Fat Dragon Games |
$2.50
|
A remix of the throne from Realm of The Mountain King as a secret door
Dragonbite clips can be found here:
www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20
Recommened Settings:
Layer Height: 0.2mm or less
Infill: 10%, 5% minimum
Top/Bottom Layers: 8 Top/ 4 Bottom
Shell... [click here for more] |
Fat Dragon Games |
$1.99
|
 This set includes an angled dungeon door base separate wall piece, two offset dungeon door base separate wall pieces and a custom dungeon lintal to fit these doors.
* This set does not include a door or the hinge to attach it to the bases, you will need to have purchased the Fat Dragon Games FDG0204 Dungeon Separate Wall set for these pieces. ... [click here for more] |
Fat Dragon Games |
$2.50
|
This is an add-on set for the Fat Dragon Games Ultimate Tavern set. https://www.drivethrurpg.com/product/254564/DRAGONLOCK-Ultimate-Tavern-Walls-Classic-Tile?
Included in this set are freestanding straight and 45 degree angle pieces as well ones placed up against tavern wall pieces.
Clips to connect the pieces together can be found here: https://www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v30?manufacturers_id=346... [click here for more] |
Fat Dragon Games |
$4.99
|
Set of spiral stairs done in the style of Realm of the Mountain King set from Fat Dragon Games.
4 2x2 stairs and 1 set of stackable stairs
Dragonbite clips can be found here:
www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20
Recommened Settings:
Layer Height: 0.2mm or less
Infill: 10%, 5% minimum... [click here for more] |
Fat Dragon Games |
$2.99
|
 I am excited to offer this new set, which includes a large cavern column with LED crystals and LED Fungus tiles! Additionally, I included a 4x4 tile with multiple LED inserts so the crystals can vary in color as an option.
Enjoy!
... [click here for more] |
Fat Dragon Games |
$14.99
|
 This Is a expansion to the existing line, adding supports/bracings in 3 different lengths. This Set works great with the Balconies/Porches set. Many of the posts were test printed, they do not require support to print. There is a load of combinations already made in the set but not every possible combination,which is why i included the supports alone. If there is one that is not in the set and... [click here for more] |
Fat Dragon Games |
$4.00
|
This set includes several types of models to populate your peaceful gardens -- planters, trees, a pond with two styles of bridge, and large stone pathways.
The center of the bridge prints in two parts, and you should glue the two parts together.
RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm recommended, 0.1mm for smoother features
Infill: 10% for all models recommended,... [click here for more] |
Aether Studios |
$4.79
|
 One of my favorite spells is continual light and I am excited to have this as a feature of these new tiles. Going with the theme of the Hand Mage, this set also includes a torch variation as well as brazier and scrying pool.
... [click here for more] |
Fat Dragon Games |
$14.99
|
 This expansion includes LED tiles to compliment the existing Necromancer Lair set. Additionally, a special 4x4 dais with two new insertables (Hand Mage scrying pool and brazier) and other variations.
... [click here for more] |
Fat Dragon Games |
$14.99
|
 This is a set of castle floor pieces using the floor texture from the base of the FDG Tower of Terror set. This set includes two 1x2 floor tiles, a 2x2 floor tile, a 2x4 floor tile, a 4x4 floor tile and two 45 degree angle pieces.
Dragonbite clips can be found here: https://www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v30 ... [click here for more] |
Fat Dragon Games |
$2.99
|
Create hex-based landscapes with this variety pack of 3D-printable STL files. DungeonPrint HexScapes contains 6 models, each approximately 35mm wide. Alternating DragonbiteTM clip slots allow for elevation changes.
Recommended Print Settings:
Layer Size: 0.15mm, or 0.10mm for smoother features
Infill: 10% recommended
Top/Bottom Layers: 6 (or... [click here for more] |
Aether Studios |
$2.99
|
 The Canals, Rivers, and Bridges set.
The set contains 37 stl. files. 36 of which are terrain tiles and 1 a small boat, There are 2 different styles of bridges both of which can be expanded to whatever length needed using the extended walkways i release as part of another pack, the extendedwalkways are included here. The river tiles also have some added details such as a small dock... [click here for more] |
Fat Dragon Games |
$16.00
|
Gnomish Farms contains 44 3D-printable STL models for creating village farms for your little people. The pieces include livestock pens, a "chicken" coop, processing equipment, multiple miniatures, and other terrain and structures. The Gnomish Farms are compatible with all DragonbiteTM villages and terrain.
Recommended Print Settings:
Layer Size: 0.15mm, or 0.10mm for smoother... [click here for more] |
Aether Studios |
$10.39
|
Gnomish Workshops contains 40 3D-printable STL models for Gnomish tinkerers. It includes a helipad and control tower, several outbuildings, and numerous outdoor workshop walls and doors in two styles, with or without assorted gears and mechanisms. These Gnomish Workshops are compatible with all DragonbiteTM villages and terrain.
Recommended Print Settings:
Layer Size: 0.15mm,... [click here for more] |
Aether Studios |
$11.99
|
Gnomish Airships contains three 3D-printable STL airships for the serious Gnomish tinkerer. Each airship has accessory mounts, and a number of different accessories are included so you can customize each ship (cannons, turbines, etc. -- the cover rendering shows several assembled options). Never let your inventors be ground-bound again!
Note: the Gnomish Workshop set is recommended to complement... [click here for more] |
Aether Studios |
$7.19
|