|
 |
|
|
|
 |
Products found in this section... |
Sort by:
|
Title |
Publisher |
Price |
Easy to build: This cardstock print-and-build terrain kit is easy to assemble, requiring just 1 cardstock paper sheet to print on (index weight, 110#, or 199gsm recommended), hobby knife, paper glue, metal ruler and cutting mat.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale (1 inch equals 5 feet or 2 meters), and can be shrunk... [click here for more] |
Dave Graffam Models |
$1.95 $1.00
|
Easy to build: This paper model kit is easy to assemble, requiring just 7 cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler, black felt-tip pen and cutting mat. Optionally, you may make use of other common hobby tools for even better results. Full instructions are included.
28mm-30mm scale: This model is designed... [click here for more] |
Dave Graffam Models |
$4.95 $2.00
|
Easy to build: This cardstock print-and-build terrain kit is easy to assemble, requiring only cardstock paper sheets to print on (index weight, 110#, or 199gsm recommended), hobby knife, paper glue, metal ruler and cutting mat.
15mm to 30mm scale: This model is designed at the popular 28mm gaming scale (1 inch equals 5 feet or 2 meters), and can be shrunk down to... [click here for more] |
Dave Graffam Models |
$2.95 $1.00
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. It may look complicated, but every part of the Village Chapel is simple to assemble on its own, and putting it together is just a matter of building up the simple shapes into... [click here for more] |
Dave Graffam Models |
$5.95 $3.00
|
Easy to build: This cardstock print-and-build terrain kit is easy to assemble, requiring just 4 cardstock paper sheets to print on (index weight, 110#, or 199gsm recommended), hobby knife, paper glue, metal ruler and cutting mat.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale (1 inch equals 5 feet or 2 meters), and can be shrunk... [click here for more] |
Dave Graffam Models |
$2.95 $1.00
|
This simple but versatile model kit is designed to be the perfect way to start a scale-model village or fill in gaps in your terrain layout.
Easy to build: This paper model kit is easy to assemble, requiring just a few cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. Step by step instructions are... [click here for more] |
Dave Graffam Models |
$2.95 $1.00
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about half an hour.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or... [click here for more] |
Dave Graffam Models |
$2.95 $1.00
|
Easy to build: This paper terrain kit is easy to assemble, requiring just 15 cardstock paper sheets to print on (110 lb. or 199gsm recommended), hobby knife, glue, metal ruler and cutting mat.
15mm to 30mm scale: These models are designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size... [click here for more] |
Dave Graffam Models |
$2.95 $1.00
|
Easy to build: This cardstock print-and-build terrain kit is easy to assemble, requiring just 4 or 5 cardstock paper sheets to print on (index weight, 110#, or 199gsm recommended), hobby knife, paper glue, metal ruler and cutting mat.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale (1 inch equals 5 feet or 2 meters), and can be shrunk... [click here for more] |
Dave Graffam Models |
$2.95 $1.00
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the... [click here for more] |
Dave Graffam Models |
$4.95 $2.00
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. Assembly time is about an hour for the whole set.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm,... [click here for more] |
Dave Graffam Models |
$2.95 $1.00
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. It may look complicated, but every part of the Inventor's House is simple to assemble on its own, and putting it together is just a matter of building up the simple shapes into... [click here for more] |
Dave Graffam Models |
$5.95 $3.00
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat.
15mm to 30mm scale: This model set is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting... [click here for more] |
Dave Graffam Models |
$4.95 $2.00
|
Easy to build: This paper model kit is easy to assemble, requiring just 18 cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. Optionally, you can use a piece of foamcore for the base.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk... [click here for more] |
Dave Graffam Models |
$4.95 $2.00
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm... [click here for more] |
Dave Graffam Models |
$1.95 $1.00
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm... [click here for more] |
Dave Graffam Models |
$2.95 $1.00
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. It may look complicated, but every part of the Country Brewery is simple to assemble on its own, and putting it together is just a matter of building up the simple shapes into the... [click here for more] |
Dave Graffam Models |
$6.95 $3.00
|
1/64 scale (20mm - 25mm): This is a 48x48 inch playmat designed for 1/64 scale die-cast cars and 20mm-25mm wargames when printed at full size. It's compatible with Gaslands as a multi-use combat racing track, including worn-down paint lines across the track that can be used to indicate starting positions, gates, and finish lines. A sneaky shortcut in... [click here for more] |
Dave Graffam Models |
$5.95 $3.00
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is just a few minutes per log, lumber stack or hay bale.
15mm to 30mm scale: These models are designed at the popular 28mm-30mm gaming scale,... [click here for more] |
Dave Graffam Models |
$1.95 $1.00
|
 THIS IS AN "EARLY ACCESS" PRODUCT: This map kit and location guide is a work in progress, but it's in a shape that I'm comfortable sharing at an early-bird price. The graphics and location info aren't finalized, and more materials are planned, so if you like what you see, rest assured that it's only going to get better. Updates should show up in your library automatically.... [click here for more] |
Dave Graffam Models |
$3.95 $2.95
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. It may look complicated, but every part of the West Gate is simple to assemble on its own, and putting it together is just a matter of building up the simple shapes into the complete... [click here for more] |
Dave Graffam Models |
$5.95 $3.00
|
Easy to build: This cardstock print-and-build terrain kit is easy to assemble, requiring just some cardstock paper sheets to print on (index-weight cover stock paper is recommended), a hobby knife, paper glue, metal ruler and cutting mat.
1/64 scale (20mm - 25mm): The models in this set are designed for 1/64 scale die-cast cars and 20mm-25mm wargames. The components... [click here for more] |
Dave Graffam Models |
$3.95 $2.00
|
Easy to build: This paper model kit is easy to assemble, requiring 14 cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. Step by step instructions are included.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or... [click here for more] |
Dave Graffam Models |
$4.95 $2.00
|
Easy to build: This paper tiles set is easy to create, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, aluminum ruler and cutting mat.
15mm to 30mm scale: These tiles are designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size... [click here for more] |
Dave Graffam Models |
$4.95 $2.00
|
Easy to build: This paper model kit is easy to assemble, requiring just 8 cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the... [click here for more] |
Dave Graffam Models |
$3.95 $2.00
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about two hours.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm... [click here for more] |
Dave Graffam Models |
$3.95 $2.00
|
Easy to build: This paper model kit is easy to assemble, requiring just 8 cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. Optionally, you can use a piece of foamcore for the base.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk... [click here for more] |
Dave Graffam Models |
$2.95 $1.00
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. It may look complicated, but every part of the Village Pub is simple to assemble on its own, and putting it together is just a matter of building up the simple shapes into the... [click here for more] |
Dave Graffam Models |
$3.95 $1.00
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm... [click here for more] |
Dave Graffam Models |
$2.95 $1.00
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm... [click here for more] |
Dave Graffam Models |
$3.95 $2.00
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Optionally, you can use a piece of foamcore for the base.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk... [click here for more] |
Dave Graffam Models |
$2.95 $1.00
|
Easy to build: This cardstock print-and-build terrain kit is easy to assemble, requiring just cardstock paper sheets to print on (index weight, 110#, or 199gsm recommended), hobby knife, paper glue, metal ruler and cutting mat.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale (1 inch equals 5 feet or 2 meters), and... [click here for more] |
Dave Graffam Models |
$2.95 $1.00
|
This bundle includes four models that will fit in any coastal city or wharf scene. This is also a great set for populating any part of a village or town, since the multiple skins give you lots of optional looks you can use in any fantasy or medieval setting.
This paper models kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors,... [click here for more] |
Dave Graffam Models |
$5.95 $3.00
|
This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on your... [click here for more] |
Dave Graffam Models |
$1.95 $1.00
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm... [click here for more] |
Dave Graffam Models |
$2.95 $1.00
|
Easy to build: This paper model is easy to assemble, requiring just cardstock sheets to print on (110# or 199gsm cardstock recommended), scissors, hobby knife and ordinary glue. Included are tips and advice for printing at various popular gaming and model railroad scales.
15mm to 30mm scale: One of the great things about papercraft models is that they can be... [click here for more] |
Dave Graffam Models |
$4.95 $2.00
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the... [click here for more] |
Dave Graffam Models |
$2.95 $1.00
|
Easy to build: This paper model kit is easy to assemble, requiring just 13 cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. Optionally, you may use a piece of foamcore cut to 6" x 9" for the ground piece.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale,... [click here for more] |
Dave Graffam Models |
$4.95 $2.00
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. Optionally, you can use a piece of foamcore for the base. A fine-line ink marker is recommended for darkening the paper edges, and foamcore is recommended for the ground piece, and... [click here for more] |
Dave Graffam Models |
$4.95 $2.00
|
Easy to build: This paper model kit is easy to assemble, requiring just 15 cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. Optionally, you can use a piece of foamcore for the base.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk... [click here for more] |
Dave Graffam Models |
$4.95 $2.00
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the... [click here for more] |
Dave Graffam Models |
$4.95 $2.00
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
15mm to 30mm scale: This model set is designed at the popular 28mm-30mm gaming scale, and can be shrunk down... [click here for more] |
Dave Graffam Models |
$4.95 $2.00
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is just a few minutes per wall section.
15mm to 30mm scale: This model set is designed at the popular 28mm-30mm gaming scale, and can be shrunk... [click here for more] |
Dave Graffam Models |
$1.95 $1.00
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about half an hour per wagon.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm,... [click here for more] |
Dave Graffam Models |
$2.95 $1.00
|
Easy to build: These pillbox bunkers can be used as gun turrets in arena battles, as gate markers in death races, and as camera towers to capture the action. This cardstock print-and-build terrain kit is easy to assemble, requiring just some cardstock paper sheets to print on (index-weight cover stock paper is recommended), a hobby knife, paper glue, metal ruler and cutting mat.... [click here for more] |
Dave Graffam Models |
$1.95 $1.00
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat.
15mm to 30mm scale: This model set is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting... [click here for more] |
Dave Graffam Models |
$3.95 $2.00
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print... [click here for more] |
Dave Graffam Models |
$3.95 $2.00
|
Easy to build: This paper tile set is easy to create, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, aluminum ruler and cutting mat. For sturdier tiles, use foamcore and spray glue.
15mm to 30mm scale: These tiles are designed with a 1" grid to be used at the popular 28mm-30mm gaming scale, and can be shrunk... [click here for more] |
Dave Graffam Models |
$2.95 $1.00
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm... [click here for more] |
Dave Graffam Models |
$3.95 $2.00
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm... [click here for more] |
Dave Graffam Models |
$2.95 $1.00
|
|
|