Close
Close
Browse Categories
Free Stuff
 Follow Your Favorites!
NotificationsSign in to get custom notifications of new products!













Author
Aaron Mulder   Remove Search Term
Advanced Search

Products found in this section... Sort by: 
 Title    Publisher    Price  
Clip-On Walls

Clip-On Walls


This set includes three sizes of clip-on walls (plus two reversed from side to side). With these five models, you can clip walls to the outside of any Fat Dragon Games dungeon floor tiles (including corners and intersections), allowing you to use the full floor space. For instance, you can create a corridor a full tile wide (2" wide), a room with exactly 4" or 6" of floor space, or other similar...   [click here for more]
Fat Dragon Games  $2.00

Add to DriveThruRPG.com Order  
Wet Caverns

Wet Caverns


This set of 22 3D-printable STL models extends the Fat Dragon Games Cavern Expansion 1 (legacy models) with additional water tiles. These tiles are based on the original FDG style of caverns. If you'd like Wet Caverns based on the current/revised FDG style of caverns, see Wet Caverns 2. Both styles look great, just pick the one that best fits the rest of your cavern prints! Wet...   [click here for more]
Fat Dragon Games  $12.99

Add to DriveThruRPG.com Order  
Half-Height Clip-On Walls

Half-Height Clip-On Walls


This set includes three sizes of clip-on walls (plus two reversed from side to side). With these five models, you can clip walls to the outside of any Fat Dragon Games dungeon floor tiles (including corners and intersections), allowing you to use the full floor space. For instance, you can create a corridor a full tile wide (2" wide), a room with exactly 4" or 6" of floor space, or...   [click here for more]
Fat Dragon Games  $1.99

Add to DriveThruRPG.com Order  
Tower Add-On 1

Tower Add-On 1


This set includes a number of tower walls and floors to expand the selection in the FDG Tower of Terror set. The three main styles of included pieces are: Tower walls on a full 4x4 dungeon floor, for a map that includes large curved walls or a tower within a greater dungeon (such as the Sunless Citadel and Cragmaw Castle) Tower walls with dungeon floors in the inside and village sidewalk...   [click here for more]
Fat Dragon Games  $6.99

Add to DriveThruRPG.com Order  
Wet Caverns 2: Wavy Streams

Wet Caverns 2: Wavy Streams


This set of 3D-printable STL models builds on the starter Wet Caverns 2: Wavy Walls set to add support for narrow streams. Inspired by the entrance to the Cragmaw Hideout (shown on the adventure map as a 10’ wide cave corridor, half dry ground and half water), the models in this set allow streams up close to walls, streams in the middle of flat ground, and transitions in between. (For...   [click here for more]
Fat Dragon Games  $14.99

Add to DriveThruRPG.com Order  
Best of the Forums: Dungeons 1

Best of the Forums: Dungeons 1


This set includes 8 dungeon-themed tiles from the fan-created section of the Fat Dragon Games forums. The tiles include: A stellar double-size water basin, with 12 (!) variations to choose from A wall-and-post (both orientations) A corner window (both orientations) A floor with two posts on opposite diagonal corners A double-thick wall, just to provide some variation for long wall sections A...   [click here for more]
Fat Dragon Games  $3.99

Add to DriveThruRPG.com Order  
Clip-On Cavern Walls

Clip-On Cavern Walls


This set adds clip-on wall options to allow full 2" wide cavern corridors and caverns that use the entire space of their floor tiles. It includes: Standard 2", short 1.5", and long 2.5" clip-on cavern walls, with which you can make any corridor, intersection, or room wall. The short and long walls have two clip slots each, so the same wall works in either orientation. Clip-on torch, skull, and...   [click here for more]
Fat Dragon Games  $5.99

Add to DriveThruRPG.com Order  
Best of the Forums: Prison Cells

Best of the Forums: Prison Cells


This set includes 15 prison bar tiles from the fan-created section of the Fat Dragon Games forums. The tiles include: Tiles with bars along the edge of the base (straight, corner, doorway, etc.) Tiles with bars across the center of the base (straight, corner, intersections, doorway, etc.) Dungeon Wall tiles with bars coming out (along both center and edges) and with bars along opposite edge All...   [click here for more]
Fat Dragon Games  $5.99

Add to DriveThruRPG.com Order  
Best of the Forums: Cavern Ruins

Best of the Forums: Cavern Ruins


This set includes 10 cavern-themed ruined tiles from the fan-created section of the Fat Dragon Games forums. The tiles include: A corner on a ruined floor Two walls on ruined floors A ruined floor with a post (both orientations) A ruined floor with two posts Four various ruined floors Recommended Print Settings: Layer Size: 0.15mm Infill: 15% all...   [click here for more]
Fat Dragon Games  $2.99

Add to DriveThruRPG.com Order  
Wet Caverns 2

Wet Caverns 2


This set of 3D-printable terrain expands on the Fat Dragon Games line of cavern tiles with water alongside walls and corners -- based on the latest style of FDG cavern walls, floors, and water. It includes a waterfall to support maps with water on multiple levels, such as the Cragmaw Hideout from the introductory 5e Lost Mine of Phandelver adventure. (If you want the same models with wavy water...   [click here for more]
Fat Dragon Games  $14.99

Add to DriveThruRPG.com Order  
Wet Caverns 2: Wavy Ground

Wet Caverns 2: Wavy Ground


Fat Dragon Games recently updated their line of cavern tiles, including redesigning the cavern floors-with-water in their Cavern Expansion 1 set. However, all the water areas are now completely flat. That’s fine if you intend to add your own water effects after the fact, but if you’d prefer to include the water texture in your prints, there was not an option to take advantage of the redesigned...   [click here for more]
Fat Dragon Games  $5.99

Add to DriveThruRPG.com Order  
Best of the Forums: Dungeon Ruins

Best of the Forums: Dungeon Ruins


This set includes 25 dungeon-themed ruined tiles from the fan-created section of the Fat Dragon Games forums. The tiles include: 2 ruined corners (each with both orientations) Ruined wall-and-post (both orientations) Ruined wall Ruined wall on ruined floor (both orientations) 2 ruined floors with cavern post (each with both orientations) 11 various ruined floors A rubble-choked corridor...   [click here for more]
Fat Dragon Games  $7.99

Add to DriveThruRPG.com Order  
Chasm

Chasm


This set of 3D printable terrain was born of my frustration mapping the chasm in the middle of the Redbrand Hideout map. One way or another the map ended up with unsatisfactory gaps between the upper and lower level. With the release of the Natural Bridges set, it seemed like the time to take another look at models for proper chasms, to put those bridges to good use. The 8 STL models in this set...   [click here for more]
Fat Dragon Games  $9.99

Add to DriveThruRPG.com Order  
Dungeon Balconies

Dungeon Balconies


Need a balcony for your BBEG to monologue from? Does Count Strahd need a place to greet his future victims? Or does your castle need a grand entrance? This set provides the stairs, railings, and balconies you need to build all these and more. Among the 33 pieces in this set, you'll find: Balcony floors, walls with balcony floors, and corners with balcony floors, all with various combinations...   [click here for more]
Fat Dragon Games  $14.99

Add to DriveThruRPG.com Order  
3D Printer Dungeons #1

3D Printer Dungeons #1


This set of 3D printable models was inspired by the Kobold section of the Sunless Citadel adventure. The 25 included STLs include a doorway for a large curved room, add-on room with skeletons, alcoves with knights and orbs, dragon column and statue, a metal keg piped into the wall, multiple fire pits, a cage whose occupant busted out, a makeshift throne arranged out of nearby rubble, and more! Several...   [click here for more]
Fat Dragon Games  $12.99

Add to DriveThruRPG.com Order  
Wet Caverns 2: Wavy Elevation

Wet Caverns 2: Wavy Elevation


Wet caverns are fun, but what natural cavern features an entirely flat, single-level layout? This selection of 3D-printable STL models adds a mid-level elevated surface alongside your underground rivers and lakes. Combine with the starter Wet Caverns 2: Wavy Ground and Wet Caverns 2: Wavy Walls sets and the elevated pieces in FDG Cavern Expansion 1 to create ever-more-elaborate wet caverns with elevated...   [click here for more]
Fat Dragon Games  $10.99

Add to DriveThruRPG.com Order  
Wet Caverns 2: Wavy Stream Elevation

Wet Caverns 2: Wavy Stream Elevation


This set of 3D-printable STL terrain builds on the starter Wet Caverns 2: Wavy Walls set and expansion Wet Cavern 2: Wavy Streams to add a higher level near your narrow streams. Inspired by the entrance to the Cragmaw Hideout (a multi-level map with steps alongside streams), this set includes steps, platforms, and elevated terrain near streams. (For the same models with flat water areas so you...   [click here for more]
Fat Dragon Games  $8.99

Add to DriveThruRPG.com Order  
Clip-On Diagonal Walls

Clip-On Diagonal Walls


This set adds on to the diagonal tiles included in the Fat Dragon Games Dungeon Separate Walls set to provide more variety in diagonal walls and to allow rooms and intersecting hallways to be built off diagonal corridors (as in the cover image for the set). This set includes three new styles: A doorway built into a diagonal corridor wall, allowing external rooms that use the corridor wall as...   [click here for more]
Fat Dragon Games  $6.99

Add to DriveThruRPG.com Order  
Wet Caverns 2: Wavy Low Corridors

Wet Caverns 2: Wavy Low Corridors


This set of 3D-printable STL terrain joins up multiple wet caverns, using wet corridors in between! These models have a wavy water effect built into the print, to fit with other wavy-water cavern pieces. (If you want flat water tiles to add your own water effect, see Wet Caverns 2: Low Corridors) These lower corridors are: Faster to print Easier to see over Easier to place miniatures...   [click here for more]
Fat Dragon Games  $9.99

Add to DriveThruRPG.com Order  
Wet Caverns 2: Wavy Low Streams

Wet Caverns 2: Wavy Low Streams


This set of 3D-printable STL terrain expands on Wet Caverns 2: Wavy Low Walls so you can build narrow streams through your half-height caverns. Inspired by the entrance to the Cragmaw Hideout (shown on the adventure map as a 10’ wide cave corridor, half dry ground and half water), the models in this set allow streams up close to walls, transitions from streams to thicker rivers or lakes, and...   [click here for more]
Fat Dragon Games  $10.99

Add to DriveThruRPG.com Order  
Wet Caverns 2: Wavy Low Walls

Wet Caverns 2: Wavy Low Walls


This set of 3D-printable STL terrain brings water to your half-height caverns! (Just as Wet Caverns 2: Wavy Walls did for full-height walls.) Now you can create underground rivers, pools, and lakes up close to low cavern walls and entrances. These models have a wavy water effect built into the print, to fit with other wavy-water cavern pieces. (If you want flat water tiles to add your own water...   [click here for more]
Fat Dragon Games  $11.99

Add to DriveThruRPG.com Order  
Wet Caverns 2: Streams

Wet Caverns 2: Streams


This set of 3D-printable STL models builds on the starter Wet Caverns 2 set to add support for narrow streams. Inspired by the entrance to the Cragmaw Hideout (shown on the adventure map as a 10’ wide cave corridor, half dry ground and half water), the models in this set allow streams up close to walls, streams in the middle of flat ground, and transitions in between. (For the same models...   [click here for more]
Fat Dragon Games  $14.99

Add to DriveThruRPG.com Order  
Wet Caverns 2: Wavy Walls

Wet Caverns 2: Wavy Walls


This set of 3D-printable STL terrain expands on the Fat Dragon Games line of cavern tiles with water alongside walls and corners -- based on the latest style of FDG cavern walls and floors. It includes a waterfall to support maps with water on multiple levels, such as the Cragmaw Hideout from the introductory 5e Lost Mine of Phandelver adventure. However, this set uses the original wavy-style water,...   [click here for more]
Fat Dragon Games  $14.99

Add to DriveThruRPG.com Order  
Wet Caverns 2: Low Streams

Wet Caverns 2: Low Streams


This set of 3D-printable STL terrain expands on Wet Caverns 2: Low Walls so you can build narrow streams through your half-height caverns. Inspired by the entrance to the Cragmaw Hideout (shown on the adventure map as a 10’ wide cave corridor, half dry ground and half water), the models in this set allow streams up close to walls, transitions from streams to thicker rivers or lakes, and transitions...   [click here for more]
Fat Dragon Games  $10.99

Add to DriveThruRPG.com Order  
Wet Caverns 2: Low Corridors

Wet Caverns 2: Low Corridors


This set of 3D-printable terrain adds on to sets like Wet Caverns 2 and Wet Caverns 2: Low Walls so you can join up multiple wet caverns, using wet corridors in between! Compared to full-height cavern pieces, these lower wet corridors are: Faster to print Easier to see over Easier to place miniatures close to -- especially important for tight corridors! These corridors work well with both...   [click here for more]
Fat Dragon Games  $9.99

Add to DriveThruRPG.com Order  
Wet Caverns 2: Low Walls

Wet Caverns 2: Low Walls


This set of 3D-printable STL terrain brings water to your half-height caverns! Now you can create underground rivers, pools, and lakes up close to lower walls and entrances. Mix with pieces from other sets such as FDG Cavern Expansion 1, Low Corridors, and Low Streams to add even more variety to your half-height cavern water layouts! Why half-height walls? These lower walls are: Faster to...   [click here for more]
Fat Dragon Games  $11.99

Add to DriveThruRPG.com Order  
Crossing the Chasm

Crossing the Chasm


The initial 3D-printable Chasm release brought much more appealing models to add a lower level of caverns to your maps. Several supporting sets have included various types of bridges over the chasm, from wooden to stone. But, what about a more natural crossing? This set includes several chasm and cavern pieces with stepping stone columns to traverse the chasm. (Don’t worry, the stirges...   [click here for more]
Fat Dragon Games  $5.99

Add to DriveThruRPG.com Order  
Wet Caverns 2: Stream Elevation

Wet Caverns 2: Stream Elevation


This set of 3D-printable STL terrain builds on the starter Wet Caverns 2 set and expansion Wet Cavern 2: Streams to add a higher level near your narrow streams. Inspired by the entrance to the Cragmaw Hideout (a multi-level map with steps alongside streams), this set includes steps, platforms, and elevated terrain near streams. (For the same models with a wavy water texture built into the models,...   [click here for more]
Fat Dragon Games  $8.99

Add to DriveThruRPG.com Order  
Flooded Dungeons

Flooded Dungeons


This set of 3D-printable STL terrain was inspired by the Dungeon of the Dead Three. That’s a basement dungeon, where the low points of the dungeon are flooded by foul-smelling water from the nearby sewers. This set is designed so the sewer-flooded level is below a dry level of dungeon. There are two styles of tiles in the set to make this work (you can use either or both): 3”...   [click here for more]
Fat Dragon Games  $11.99

Add to DriveThruRPG.com Order  
Wet Caverns 2: Elevation

Wet Caverns 2: Elevation


Wet caverns are fun, but what natural cavern features an entirely flat, single-level layout? This selection of 3D-printable STL models adds a mid-level elevated surface alongside your underground rivers and lakes. Combine with the starter Wet Caverns 2 set and the elevated pieces in FDG Cavern Expansion 1 to create ever-more-elaborate wet caverns with elevated sections! (The sample layout on...   [click here for more]
Fat Dragon Games  $10.99

Add to DriveThruRPG.com Order  
Stepping Stones

Stepping Stones


This set includes cavern stream tiles with stepping stones in the water. With these you can make a small crossing for your dungeon denizens (and the stones will surely twist and sink beneath the invading PCs!). For a larger crossing, try combining with the Floor Water B and Floor Water D tiles in the FDG Cavern Expansion 1 set. This was the July 2018 bonus set for DungeonPrint Studio...   [click here for more]
Fat Dragon Games  $2.99

Add to DriveThruRPG.com Order  
Haunted Interior

Haunted Interior


A haunted house deserves an interesting interior… after all, witches and hags leave their mark. Whether in the basement or locked away in a back room, these 3D-printable STL files will give some spirit to your haunted house! Recommended Print Settings: Layer Size: 0.15mm, or 0.1mm for finer detail Infill: 15% for all models recommended, 5%...   [click here for more]
Fat Dragon Games  $7.99

Add to DriveThruRPG.com Order  
Haunted House

Haunted House


It's not just for the Sinister Secret of Saltmarsh... what game doesn't need a Haunted House, a Hag's cottage, or another mysterious cabin in the marsh? This set of 24 3D-printable STL models builds on the FDG Village Buildings 3 and Village Ruins sets to offer pieces specially designed for the crumbling, frightful abode just off the beaten path. Included Models: Recommended Print Settings: Layer...   [click here for more]
Fat Dragon Games  $9.99

Add to DriveThruRPG.com Order  
Wavy Chasm

Wavy Chasm


Chasms are great, but how about spicing up a cavern map with an underground river or lake? This set of 3D-printable STL models combines the Chasm walls with water bases, to provide chasms with a watery bottom. It includes an entrance and two varieties of water spray, along with multiple chasm walls and corners. As before, the chasm models in this set stick up far enough to make a smooth edge with...   [click here for more]
Fat Dragon Games  $10.99

Add to DriveThruRPG.com Order  
Wet Chasm

Wet Chasm


Chasms are great, but how about spicing up a cavern map with an underground river or lake? This set of 3D-printable STL models combines the Chasm walls with water bases, to provide chasms with a watery bottom. It includes an entrance and two varieties of water spray, along with multiple chasm walls and corners. As before, the chasm models in this set stick up far enough to make a smooth edge with...   [click here for more]
Fat Dragon Games  $10.99

Add to DriveThruRPG.com Order  
Elevated Pools

Elevated Pools


This set complements other sets such as FDG Dungeon Delve 1, Dungeon Delve 2, and Dragonbite Dungeon Balconies, to add pools at the elevated dais/balcony level. This set includes the following elevated pool tiles: An elevated water tile Two elevated "inner" pool corners (angled and straight) Two elevated "outer" pool corners (angled and straight) An...   [click here for more]
Fat Dragon Games  $2.99

Add to DriveThruRPG.com Order  
Ruined Stone Walls

Ruined Stone Walls


A haunted house or spooky graveyard deserves more than a set of pristine walls… So this set of 15 3D-printable STL models builds on the FDG Cemetery set and the freestanding wall from FDG Village Items 2 to bring you more worn and busted-up walls. Perfect for that house that just hasn’t been tended for a decade or two… at least, not by living caretakers. Note that the walls...   [click here for more]
Fat Dragon Games  $9.99

Add to DriveThruRPG.com Order  
It Belongs in a Museum!

It Belongs in a Museum!


"It Belongs in a Museum!" includes a 3D-printable selection of four of our favorite traps and a varity of golden idols. Because who hasn't wanted to recreate their favorite movie scenes? All pieces are compatible with other DragonbiteTM terrain. Recommended Print Settings: Layer Size: 0.15mm Infill: 10% recommended; 15% for the falling floor trap insert Top/Bottom...   [click here for more]
Fat Dragon Games  $4.99

Add to DriveThruRPG.com Order  
Konga Rising

Konga Rising


This set of printable terrain STLs is the start of a new style of jungle walls and buildings, with a very special dungeon entrance piece! It was the July 2018 DungeonPrint Community Choice selection. Included pieces: Recommended Print Settings: Layer Size: 0.15mm, or 0.1mm for finer detail Infill: 10% for all models recommended Top/Bottom...   [click here for more]
Aether Studios  $9.99

Add to DriveThruRPG.com Order  
Space Oddity

Space Oddity


This set of 3D-printable space tiles complements the existing Spaceships 1 and Spaceships 2 line of Terran ship tiles, and the Alien Spaceships and Alien Invasion sets of alien ship tiles. It includes several custom STL models for each, expanding the options available for both alien and terran ships. RECOMMENDED PRINT SETTINGS Layer Size: 0.15mm recommended, 0.1mm for smoother...   [click here for more]
Fat Dragon Games  $3.99

Add to DriveThruRPG.com Order  
Shipwreck

Shipwreck


Though there are a number of watery sets -- indoor, outdoor, and underground -- it seems a little boring to have just plain water tiles “in the middle.” This set of 3D-printable STL models spices up a river or lake with some wreckage that might suggest past (or future!) events. Kraken not included. Note: there are two styles of water tiles in the Fat Dragon...   [click here for more]
Fat Dragon Games  $4.99

Add to DriveThruRPG.com Order  
Flooded Dungeons 2

Flooded Dungeons 2


Like the core Flooded Dungeons set, this 3D-printable STL terrain was inspired by the Dungeon of the Dead Three. That’s a basement dungeon, where the low points of the dungeon are flooded by foul-smelling water from the nearby sewers. This set adds new ways to connect your flooded dungeons to caverns and dry dungeons, as well bringing in a mid-corridor doorway and pipe walls to increase the,...   [click here for more]
Fat Dragon Games  $8.99

Add to DriveThruRPG.com Order  
Displaying 1 to 42 (of 42 items) Result Pages:  1 
Select Page Number