| Title |
Publisher |
Price |
These risers use Fat Dragon Games DragonbiteTM clip-together bases, and support the bottom of an upper layer of Dragonbite tiles. They come in a variety of heights to allow you to position the upper level exactly where you want. The logic behind the various heights is:
Elevated/Dais 27.7mm: If you put a floor on top of this, the surface of the floor will be roughly level with the... [click here for more] |
Aether Studios |
FREE
|
This set of 3D-printable STL models includes three sizes of clip-on walls (plus two reversed from side to side). With these five models, you can clip walls to the outside of any dungeon floor tiles (including corners and intersections), allowing you to use the full floor space. For instance, you can create a corridor a full tile wide (2" wide), a room with exactly 4" or 6" of floor space, or other... [click here for more] |
Fat Dragon Games |
$2.00
|
This is a revised, retextured, and updated waterfall from the original legacy Wet Caverns Set. I did this waterfall specifically for the Cragmaw Hideout section of the Lost Mines of Phandelver. This model was one of my first big projects when I got into tile remixing. I made this using the original caverns walls, the water from Dungeon Expansion 5, and a whole lot of very careful stretching in meshmixer.... [click here for more] |
Fat Dragon Games |
$1.00
|
Included in this download are .stl files for 16 different landscape textures, 4 each of Grass, Rough, Rocky, and Snow Drift terrain.
Each one is mounted to DRAGONLOCK™ Ultimate bases for use with other Fat Dragon Games tiles!
... [click here for more] |
Fat Dragon Games |
$2.00
|
This set includes three sizes of clip-on walls (plus two reversed from side to side). With these five models, you can clip walls to the outside of any Fat Dragon Games dungeon floor tiles (including corners and intersections), allowing you to use the full floor space. For instance, you can create a corridor a full tile wide (2" wide), a room with exactly 4" or 6" of floor space, or other similar... [click here for more] |
Fat Dragon Games |
$2.99
|
Includes a normal height and half height remixed curve wall from Fat Dragon Games Dungeons. This set is great for the exterior of buildings where you don't want a tile edge.
... [click here for more] |
Fat Dragon Games |
$1.00
|
Included in this set is 20 custom remixed Caverns tiles for use with Fat Dragons Games Caverns Starter and Expansion set.
... [click here for more] |
Fat Dragon Games |
$2.00
|
Expand your GM Screen with this remixed skull dice tray.
This set would not have been possible without the work of Peter Kirylo, Sr. He will share in the royalties for this set, as he is due for his wonderful circle tray model I needed to craft it. I look forward to working with him again to bring great models to this community.
Printing instructions:
6 top layers minimum suggested for this model.... [click here for more] |
Fat Dragon Games |
$1.99
|
This massive 98 item set contains the basics to build a diverse catacombs dungeon. Included in this set are:
16 Wall Tiles (including transitions from normal FDG dungeons)
20 Floor Tiles (including transition tiles)
10 Doors (also includes 9 custom text lintels)
8 Corners (4 with Skulls along the wall base, 4 without)
8 Curved Walls (4 with Skulls along the wall base, 4 without)
8 Pillar Tiles (4... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This set of 22 3D-printable STL models extends the Fat Dragon Games Cavern Expansion 1 (legacy models) with additional water tiles.
These tiles are based on the original FDG style of caverns.
If you'd like Wet Caverns based on the current/revised FDG style of caverns, see Wet Caverns 2.
Both styles look great, just pick the one that best fits the rest of your cavern prints!
Wet... [click here for more] |
Fat Dragon Games |
$12.99
|
Buddy Cthuhlu, originally on Thingiverse by Kibilz, recut for proper printing with his own custom 4x4 FDG base. Also included is a 4x4 version of the tile for any of your own ideas. This model prints in 3 sections, so that you only have to use supports for the Buddy C top portion.
This tile is a compliment to the Lovecraftian set of terrain.
Please enjoy this free model, and consider supporting my... [click here for more] |
Fat Dragon Games |
$1.00
|
Busy Little Dwarves Expo #1 is a recreation of the tile styles in Fat Dragon Games Dungeons Expansion 1 not otherwise represented.
It includes:
2x2 Ruined Wall
2x2 Hidden Wall (rotating)
2x4 Floor
2x2 Corner Pillar
2x2 Corridor 1
2x2 Corridor 2
2x2 Floor Rubble
... [click here for more] |
Fat Dragon Games |
$3.00
|
Included in this set are 21 awesome new tiles to compliment your Fat Dragon Games Caverns! This set is specifically made to compliment the FDG Caverns Expansion 1, Wet Caverns, and Dry Caverns.
More Caverns Display
Download the free DRAGONBITE™ Clip model here: /product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20... [click here for more] |
Fat Dragon Games |
$9.00
|
Included in this set are 35 tiles to expand your FDG Caverns. These tiles were designed by Tim as part of my Patreon and remixed from both the revised and legacy caverns, as well as the water tile from Dungeon Hazards, Skull Entrance, and the very awesome Terrain4Print rock formations released under the CC-AO license.
... [click here for more] |
Fat Dragon Games |
$10.99
|
This set of tiles was drafted for construction by my patrons. Please be advised these mine tracks are original construction and do not fit the mine tracks from the soon to be published FDG Mines official set. When that set posts, you can expect updates to this set for compatability and track transitions.
Included in this set are over 35 remixed models for Fat Dragon Games Caverns dungeon terrain.... [click here for more] |
Fat Dragon Games |
$8.99
|
Included in this set are three custom remixed Fat Dragon Games Dungeon Tiles. Add pools of nefarious and vile liquids to your dungeons. Your most fearsome evil wizards will thank you gleefully. Wonderful for pushing players into or goading into a swim with a failed perception check. These pools will make a great addition to any dungeon. To maximize the ulitility of this set, we suggest you also pick... [click here for more] |
Fat Dragon Games |
$2.00
|
The caverns needed better corners to work with water. So I made some.
DRAGONBITE™ Community Creator model.
For suggested print settings, please download the free Dragonlock™ Ultimate: Free Sample Set here: /product/197128/DRAGONLOCK-Ultimate-Free-Sample-Set
Download the free DRAGONBITE™ Clip model here: /product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20... [click here for more] |
Fat Dragon Games |
$1.00
|
It's about giant buildings folks. That's what it really comes down to. That's all that's left when we go to see our ancestors. The Busy Little Dwarves Design Bureau understands the need to work hard today to ensure a better tomorrow for our little ones. After all, what do we really leave behind for our children but unnecessarily tall structures with incredible, intricate, and impractical architecture.... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Included in this title are 12 remixed tiles for Fat Dragon Games Caverns Terrain.
4x4 Elevated Cavern Floor
4x4 Crater
4x4 Elevated Crater
4x4 Elevevated Water Hole 1
4x4 Elevevated Water Hole 2 With Ledged Rock
4x4 Elevevated Water Hole 1
4x4 Elevevated Water Hole 2 With Formation Rock
4x4 Water tile with Rock Formation
4x4 Water Tile with Ledged Rock
4x4 Water Tile with Rock Hut Bottom... [click here for more] |
Fat Dragon Games |
$2.00
|
Included in this set are 9 custom remixed tiles combining elements from Fat Dragon Games Starter set, Expansion 9, and Villiage 1 set. These doors were requested by my friend @ammulder on the FDG Forums for use as "secret" doors that are clearly visible from one side. They are free to the community in celebration of Fat Dragon Games Kickstarter 3.
Each door tile prints in one solid piece and will... [click here for more] |
Fat Dragon Games |
$0.99
|
Need a balcony for your BBEG to monologue from? Does Count Strahd need a place to greet his future victims? Or does your castle need a grand entrance? This set of 3D-printable STL models provides the stairs, railings, and balconies you need to build all these and more.
Among the 33 pieces in this set, you'll find:
Balcony floors, walls with balcony floors, and corners with balcony floors,... [click here for more] |
Fat Dragon Games |
$14.99
|
Choice Caverns includes 4 new 2x2 remixed cavern tiles and 1 oversized 4x6 Cavern Chasm. I made each of these for my patrons in October 2018, so it seems fitting to call them Choice. These were remixed from the Fat Dragon Games Revised Caverns terrain set. ... [click here for more] |
Fat Dragon Games |
$2.99
|
This set of 3D printable terrain was born of my frustration mapping the chasm in the middle of the Redbrand Hideout map. One way or another the map ended up with unsatisfactory gaps between the upper and lower level. With the release of the Natural Bridges set, it seemed like the time to take another look at models for proper chasms, to put those bridges to good use.
The 8 STL models in this set... [click here for more] |
Fat Dragon Games |
$9.99
|
Included are seven Eight 3d models in .stl format of Herrinbone Brick dungeon and village street tiles. These tiles print great with layer height at .2 or less. A wonderful addition to any village, town, or city encounter. Two of the old legacy "Long Brick" are also included, but not shown on the cover.
Tiles are mounted to Fat Dragon Games Dragonlock tile system bases. ... [click here for more] |
Fat Dragon Games |
$2.00
|
This set of tile terrain includes literally everything you could ever need to make a diverse and multi-level setup of cavern terrain. It was created by Károly Csúrgó and Will Walker as a gift to the community. Over 200 models of Dragonbite-compatible, 2x2 gridded cavern terrain. Virtually every model is equipped with LEDs in the floor. Over a dozen variations of ore including copper, gold, mithril,... [click here for more] |
Aether Studios |
$2.00
|
This set of 3D printable models was inspired by the Kobold section of the Sunless Citadel adventure. The 25 included STLs include a doorway for a large curved room, add-on room with skeletons, alcoves with knights and orbs, dragon column and statue, a metal keg piped into the wall, multiple fire pits, a cage whose occupant busted out, a makeshift throne arranged out of nearby rubble, and more!
Several... [click here for more] |
Fat Dragon Games |
$12.99
|
This collection of 1 Inch Miniature Bases is perfect for matching with your own miniatures that need an outdoor, natural base.
Bases include Grass, Rough, Rocky, Snow, Dungeon, Cavern, Wood, and Cobblestone textured Bases.
Crafted upon request of community member @Olaf on the Fat Dragon Games Forums. ... [click here for more] |
Fat Dragon Games |
$2.00
|
Included in this set are 20 remixed files for Fat Dragon Games Tower of Terror 3d terrain set. You'll need that base set to make full use of these tiles.
These tiles will help you connect to other FDG dungeon terrain models and add variation to your existing towers.
... [click here for more] |
Fat Dragon Games |
$6.99
|
This set of tiles was drafted for construction by my patrons. Included are 57 3d models that are compatible with the FDG Cavern Mines. There are also 50 more models for the original legacy cave tracks set, as well as a transition tile between to the two sets. There is also an awesome mine cart by Aether Studios artist Jacob Armour.
... [click here for more] |
Fat Dragon Games |
$24.99
|
Included in this set are 13 themed models to augment your Fat Dragon Games dungeons with an H. P. Lovecraft inspired set. Included in this set are the following models:
4x4 Elder Brain (with a slot for tea light underneath)
1 inch Separate Wall - Cthuhlu Long Face
2 inch Separate Wall - Cthuhlu Long Face
2 inch Separate Wall - Cthuhlu Brain (Previously released in Separate Walls #1)
Angled Wall... [click here for more] |
Fat Dragon Games |
$3.00
|
Our good friend and patron Tim requested this. He was very kind to test print it and take pictures. Tim has been a supporter of Aether for a long time, and he continues to inspire us to make amazing things. Thank you Tim. Thank you to all our patrons who make it possible for us to do what we love.
... [click here for more] |
Fat Dragon Games |
$0.99
|
Do you paint your 3D-printed terrain? If so, do you ever get paint on your hands from picking up a tile that's not quite dry? Or smudge one place while twisting the piece at an odd angle to get your brush at another place?
Never again. This comfortable grip snaps to the bottom of DragonbiteTM-compatible tiles, letting you paint the entire thing, odd angles and all, no muss no fuss. And if... [click here for more] |
Aether Studios |
Pay What You Want
|
Included in this set are all the files seen in the 3d viewer below. These include a number of variations of walls, floors, and corners that make up the Space Ships One base set. This set began as a rough idea that was brought into life by a wonderful person named Smiles. She helped shape this set from the very beginning with ideas and encouragement. I consider her my co-artist on this set, and she... [click here for more] |
Fat Dragon Games |
$9.99
|
From the team at Aether Studios comes the Electro Rail Trains sets! Included in this you will find 31 .stl files for 3d printing. Everything you need to get started on your first electro rail train is here. Expand your Electro Rail Empire with more sets from Aether Studios. This 3d printable terrain includes generous fighting spaces, a strong sci-fi influence throughout, and easy connect-ability.... [click here for more] |
Aether Studios |
$10.00
|
Enjoy this free FDG Dragon Logo wall.
FDG Dragon Wall Tile by skipatlan on Sketchfab
DRAGONBITE™ Community Creator model.
For suggested print settings, please download the free Dragonlock™ Ultimate: Free Sample Set here: /product/197128/DRAGONLOCK-Ultimate-Free-Sample-Set
Download the free DRAGONBITE™ Clip model here: /product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20... [click here for more] |
Fat Dragon Games |
$2.00
|
This set of 3D-printable STL files, Cracked Marble Floors, came from a request on the Fat Dragon Games Forums. I didn’t think it would work, but it did. I tried to think of a walls set that would fill out the set, but I couldn’t find the the right fit. So, here is a big set of floors; see the related sets below for some clip-on walls that will work well with them.
Recommended Print... [click here for more] |
Aether Studios |
$1.00
|
Included in this set of terrain you will find 36 remixed Aztlan and FDG-Dungeons tiles. There are also 4 development files for additional remixing by other artists.
... [click here for more] |
Fat Dragon Games |
$1.00
|
This set of 3d printable gaming terrain includes 26 STL models for creating a huge gothic cathedral. Inside you will find everything you need to make the grand sanctuary of your dreams with flying buttresses, arched windows and doors, marble floors, and stained glass rose windows. You can use this to make a smaller church by omitting the transepts and crossings, or make an extra-large cathedral by... [click here for more] |
Aether Studios |
$15.00
|
Included in this set are 16 remixed FDG Dungeon tiles with catacombs elements based on user input. It has been a year since I first released the Catacombs floors, later rolled into the Catacombs 1 set and I am glad to be updating it. Thank you to the many artists who published CC-AO and Public Domain assets for use in this set. All are noted in the ReadMe.
Shown with models from others sets: Door... [click here for more] |
Fat Dragon Games |
$7.99
|
Included in this set are the following .stl models
2x2 Dungeon Floor - Skull Base 1 (Middle)
2x2 Dungeon Floor - Skull Base 2 (Corner)
Solo Water Pool
Solo Acid-Blood Pool
Solo Human Stew pool
2x2 Dungeon Floor - Hole Tile with Brace
Swappable Chest 1, Chest 2, Create, Keg, Sack, Tentacle, Tentacle 2, and Water
2x2 Dungeon Multi Wall Base
Multi Wall Shaft
Rotating Secret Wall with... [click here for more] |
Fat Dragon Games |
$19.99
|
Asian Altars, Pillars, and Basins is a Fat Dragon Games Dragonbite Community Creator set with 17 brand new .stl files to add an oriental theme to your games.
The full list of files includes:
2x2 Asian Floor
2x2 Pool Tile (Asian and FDG Dungeon floors)
2x2 Spiral Dais (Asian and FDG Dungeon floors)
Dragon Pillars (Left and Right)
Dragon Basins (Left and Right)
Torii Shrine for Gong
Dragon... [click here for more] |
Fat Dragon Games |
$3.99
|
The FDG Village 4x4 street tiles, gridded upon request for the FDG Facebook Community. A special thanks the Raphael Fellipe for his help test printing. Includes 9 4x4 tiles from the Village Streets.
... [click here for more] |
Fat Dragon Games |
$3.00
|
Included in this set of 3d printable terrain is the massive Cliffside community creator expansion for the Fat Dragon Games Dragonbite Terrain system. To make full use of this terrain you will want to have at least one of the following sets: Dungeon Starter, Cavern Starter, or Castle sets. Be sure to check out Fat Dragon Games for these sets. There are 58 stl models included in this release.
There... [click here for more] |
Fat Dragon Games |
$14.99
|
This set of 3D-printable village signs lets you outfit any DragonlockTM-compatible building with custom hanging signs. It includes both a variety of plain designs for your own artwork or decals, and textured wood signs that announce their own purpose. Overall there are more than 20 STL models of the signs, plus several pole and hook models that the signs can hang from.
Recommended Print Settings:
Layer... [click here for more] |
Aether Studios |
$8.00
|
Shh! Did you hear that? I think there is something in that rubble over there!
Tremors in the Rubble contains 8 brand new tiles and 1 new loose debris for the Fat Dragon Games Dragonlock Dungeons. Each tile has a Before and After variant, so you can replace them when the players get close enough to attack (or make the perception check). Plenty of flat space to put treasure chests and other enticements,... [click here for more] |
Fat Dragon Games |
$2.00
|
Included in this set are 16 remixed FDG Dungeon tiles with catacombs elements based on user input. It has been a year since I first released the Catacombs floors, later rolled into the Catacombs 1 set and I am glad to be updating it. Thank you to the many artists who published CC-AO and Public Domain assets for use in this set. All are noted in the ReadMe. ... [click here for more] |
Fat Dragon Games |
$7.99
|
This set includes several types of models to populate your peaceful gardens -- planters, trees, a pond with two styles of bridge, and large stone pathways.
The center of the bridge prints in two parts, and you should glue the two parts together.
RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm recommended, 0.1mm for smoother features
Infill: 10% for all models recommended,... [click here for more] |
Aether Studios |
$17.00
|
A selection of clip on walls in the dwarven texture. Includes 17 models for clip on walls, with 3-4 variations of normal, short, and long walls. Also includes a number of 2x2 trimmed edge tiles.
This set would not have been possible without the ideas, input, pictures, constructive criticism, and generous test-printing by Tim Thorpe, co-artist. Thank you Tim. Also of great help was Aaron Mulder in... [click here for more] |
Fat Dragon Games |
$6.99
|
This set of 3D-printable STL files includes four giant 2"x2" pillars in various states of ruin for your Dwarven Holds. See the related set list below for additional Dwarven sets that you can use to create a huge variety of Dwarven and mine maps!
Recommended Print Settings:
Layer Size: 0.15mm, or 0.10mm for smoother features
Infill: 10% recommended
Top/Bottom... [click here for more] |
Aether Studios |
$3.00
|
Included in this set are 17 Dragonbite floor and pillar tiles representing a particularly dank and disturbing dungeon. 12 2x2 inch variations, 4 2x2 Pillars and 1 4x4 tile. It has been a year since I first released the Catacombs floors, later rolled into the huge Catacombs 1 set. These new floors are based on user requests and tons of help from Thingiverse. Thank you to the many artists who published... [click here for more] |
Fat Dragon Games |
$7.99
|
Log In 
