Title |
Publisher |
Price |
LIMITED TIME OFFER - SAVE 75%!
DRAGONLOCK Lost Dungeons™ is an all-new 3D printable terrain series that is the culmination of our 18 years of design experience in tabletop gaming, and this master set is so complete we even include a dungeon toilet!
All models print supportless and are optimized for FDM 3D printers. This set features our innovative no-solder LED lighting designs... [click here for more] |
Fat Dragon Games |
$49.99 $12.49
|
DRAGONLOCK Lost Dungeons™ is an all-new 3D printable terrain series that is the culmination of our 18 years of design experience in tabletop gaming, and this master set is so complete we even include a dungeon toilet!
All models print supportless and are optimized for FDM 3D printers. This set features a massive pit, three different opening door options, three LED inserts (acid,... [click here for more] |
Fat Dragon Games |
$4.99 $3.74
|
DRAGONLOCK Lost Dungeons™ is an all-new 3D printable terrain series that is the culmination of our 18 years of design experience in tabletop gaming, and the master set is so complete we even include a dungeon toilet!
All models print supportless and are optimized for FDM 3D printers. This set features four variations of open arches, arched doors, and portcullises.
New to... [click here for more] |
Fat Dragon Games |
$4.99 $3.74
|
DRAGONLOCK Lost Dungeons™ is an all-new 3D printable terrain series that is the culmination of our 18 years of design experience in tabletop gaming, and the master set is so complete we even include a dungeon toilet!
All models print supportless and are optimized for FDM 3D printers. This set features eight ruined wall and floor models.
New to 3D printing? We've got you covered!... [click here for more] |
Fat Dragon Games |
$6.99 $5.24
|
Busy Little Dwarves Expo #1 is a recreation of the tile styles in Fat Dragon Games Dungeons Expansion 1 not otherwise represented.
It includes:
2x2 Ruined Wall
2x2 Hidden Wall (rotating)
2x4 Floor
2x2 Corner Pillar
2x2 Corridor 1
2x2 Corridor 2
2x2 Floor Rubble
... [click here for more] |
Fat Dragon Games |
$3.00
|
Over seventy feet long, and able to rear up to fifty feet tall, the Tarrasque is a terrifying monster even dragons think twice about approaching! Now, you can print out a full scale version of this mythic beast, and watch your players panic when they realize what they're facing! Includes both OBJ and STL file formats, a pre-chopped version sized to fit even inside an Anycubic Photon or similar sized... [click here for more] |
Valandar |
$2.49
|
It's about giant buildings folks. That's what it really comes down to. That's all that's left when we go to see our ancestors. The Busy Little Dwarves Design Bureau understands the need to work hard today to ensure a better tomorrow for our little ones. After all, what do we really leave behind for our children but unnecessarily tall structures with incredible, intricate, and impractical architecture.... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
If you have Fat Dragon Games Village sets and you need to make REALLY BIG room areas then these are the solution for you!
These double pillars allow you to use D-Walls to run walls along two 4"x4" using adjacent pillar holes (just as C-Walls do). The pillars have double prongs that are inserted into corresponding corners of adjoining tiles as shown in the image.
The Stone pillar projects assymetrically... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Busy Little Dwarves Expo #2 is a recreation of the tile styles in Fat Dragon Games Dungeons Expansions not already represented in the Realm of the Mountain King set, or the various Busy Little Dwarves titles.
It includes the files seen in the viewer and listed below:
2x2 Dwarven Floor 2
2x4 Dwarven Floor 2
4x4 Dwarven Floor
4x4 Dwarven Floor 2
2x2 Dwarven Wall Hole
2x2 Dwarven Well (empty)
2x2... [click here for more] |
Fat Dragon Games |
$10.99
|
A selection of clip on walls in the dwarven texture. Includes 17 models for clip on walls, with 3-4 variations of normal, short, and long walls. Also includes a number of 2x2 trimmed edge tiles.
This set would not have been possible without the ideas, input, pictures, constructive criticism, and generous test-printing by Tim Thorpe, co-artist. Thank you Tim. Also of great help was Aaron Mulder in... [click here for more] |
Fat Dragon Games |
$6.99
|
Gaoler Lou's is your source for FDG Dungeon Windows, Jails, Prison Bars, Shackles, and all the other models you need to make sure those pesky adventurers stay locked up until the trial or other, faster methods of "Justice." Included in this set are new Dungeon windows, with and without bars or grates. There are also Village Walls A-E for a new Prison Wall setup to match Arenwel's awesome prisons.... [click here for more] |
Fat Dragon Games |
$12.99
|
Dwarves need to go to the restroom, too. 10 new toilet walls for your Dwarves, thanks to Lou Anders. Use the floor tiles from the Dragonlock Ultimate Sewers (sold separately) to make a trough in the center. ... [click here for more] |
Fat Dragon Games |
$3.99
|
Lurching out of the tulgey wood and into your games, the Jabberwock is ready for you to print it, and terrify any adventurers that forgot their Vorpal Swords! ... [click here for more] |
Valandar |
$1.99
|
Warrior STL file to print. Highly detailed 32mm scale STL file for resin printing. Includes both unsupported and presupported versions.
Sagaborn RPG inspired STLs files of top-notch 3D Miniature figures suitable for Sagaborn, Tabletop Games, Collectors, DnD and other Role Playing games. Created under license from Lone Wanderer Entertainment. ... [click here for more] |
CeleSTL Minis |
$3.00
|
Fungoid (3D Printing File- 28mm Gaming Miniatures)
Nicely Priced at 99 Cents!
Though bipedal "mushroom folk" are a staple of high fantasy gaming these fungoids also feel right at home next to space opera/star faring miniatures as well. Need something really weird for your next mutant wasteland romp? Go with some intelligent fungus! No matter your particular taste... [click here for more] |
Fishwife Games |
$0.99
|
Maze Game Pedestal (STL 3D Printing Model File) The crafty thief peers into the grand ballroom, curious to see what the wealthy occupants within are doing. A trio of young nobles are gathered around an elaborate maze mounted on a stone pedestal. The best dressed (a prince perhaps?) participant laughs gleefully as he picks up a jade figurine and moves it to another hallway on the... [click here for more] |
Fishwife Games |
$2.50
|
This is a 3D printable evil tree monster based on a model I made to portray Wintersplinter from the D&D 5e module Curse of Strahd, but it can be used to portray any ambulatory tree of malign disposition, and you can even splice the print at the top of the legs if you want a non-ambulatory version.
Printing Recommendations
I recommend you print this using 4-6 top, outside and... [click here for more] |
2nd Dynasty |
$3.74
|
Vicious... nasty... savage... All these and more apply to the Hydra! This regenerating dragonkin is now available for 3D printing, and comes both in a single piece form, and pre-chopped for smaller printers (including resin). The base has minor detailing on it of "cracked earth", but can easily be modified for your preferred terrain type, or even left off entirely to just place directly on the map!... [click here for more] |
Valandar |
$2.99
|
You will get all files to print this items.
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
Scale is for 28mm Miniatures (approx 1/48) you can rescale it:
Example Scale factor:
10mm = 40 - 45 % 15mm = 65 % (H0 Railroad) 20mm = 75 - 80% 28mm = 100 % (0 Railroad)
If you need a printed... [click here for more] |
ESLO |
$5.95
|
WELCOME BACK TO INSTADUNGEON™ Quick and easy to use single-piece (fully integrated) 3D print STL dungeon tiles compatible with tabletop RPGs!
The INSTADUNGEON Expansion Set 1 adds 10 main room and corridor tiles to the INSTADUNGEON series.
WERE YOU LOOKING FOR THE FOUNDATION SET?
The INSTADUNGEON Foundation Set offers 22... [click here for more] |
Big Dumb Fun Games |
$12.99
|
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
- dwarfen roads
- columns
- rock
- gate
- big dwarfen door
- dwarfen house
Minimum printbed needed is 15 x 15 cm and 15 cm high. Scale is for 28mm Miniatures (approx 1/48) you can rescale it:
Example Scale factor:
10mm... [click here for more] |
ESLO |
$15.95 $11.17
|
Wooden Bookshelf With Stuff (STL 3D Printing Model Files)
This set of stl files for 3d printing features a rustic wooden bookshelf and a small collection of books, bottles, and gazing ball to fill it with. Though intended for fantasy these printables are usable for many other settings- from pirate settlements to log cabins. The presence of bottles and books makes the bookshelf especially... [click here for more] |
Fishwife Games |
$2.50
|
Creatures and characters from across the planes…
The many and disparate planes of the multiverse are home to an infinite variety of strange and dangerous creatures—and an equally broad array of heroes and adventurers who explore—or are native to—the planes. Whether you’re playing a Planebreaker campaign, taking your fantasy adventures into the planes by some other means, or simply want to... [click here for more] |
Monte Cook Games |
$14.99
|
Creatures and characters from across the planes…
The many and disparate planes of the multiverse are home to an infinite variety of strange and dangerous creatures—and an equally broad array of heroes and adventurers who explore—or are native to—the planes. Whether you’re playing a Planebreaker campaign, taking your fantasy adventures into the planes by some other means, or simply want to... [click here for more] |
Monte Cook Games |
$14.99
|
Creatures and characters from across the planes…
The many and disparate planes of the multiverse are home to an infinite variety of strange and dangerous creatures—and an equally broad array of heroes and adventurers who explore—or are native to—the planes. Whether you’re playing a Planebreaker campaign, taking your fantasy adventures into the planes by some other means, or simply want to... [click here for more] |
Monte Cook Games |
$5.99
|
INTRODUCING INSTADUNGEON™ Quick and easy to use single-piece (fully integrated) 3D print STL dungeon tiles compatible with tabletop RPGs!
The INSTADUNGEON Foundation Set includes 22 main room and corridor tiles, as well as the smaller tiles sometimes needed to create interconnections—an Entry/Exit tile, a Door tile, a Spacer tile, and an End Cap... [click here for more] |
Big Dumb Fun Games |
$39.99
|
Celtic Table (STL 3D Printing Model File)
This table with a decorative engraved top is perfect for taverns, inns, and manors. A nice basic addition to your fantasy gaming 3d printing needs.
The preset dimensions for this file is 48x28x19mm. The table is flipped upside down for easier printing. Feel free to adjust it as needed when you load the file into your favorite slicer program... [click here for more] |
Fishwife Games |
$1.00
|
Basilisk vs Cockatrice, a showdown between two monstrous foes, each with a deadly petrifying gaze!
What you get.
A set of two pre-supported 3d printable monsters ready to inhabit your dungeons, terrorize your battlefields or look pretty on your shelf (in a monstrous way). It comes with a diorama base, (see above) or if you prefer individual monsters, oval bases... [click here for more] |
FoxCraft |
$14.95
|
Alien Mineral Formations (3D Printing STL File):
This collection of 3 different mineral formation models is perfect for that bizarre alien landscape or exotic fantasy cavern. You get 3 different STL files with this product. ... [click here for more] |
Fishwife Games |
$2.00
|
It's a great cockatrice, a giant rooster-lizard monster with a petryfying gaze!
What you get.
You get pre supported stl files to 3d print a multi part great cockatrice. Oval and rectangular bases come as options. Unsupported files and .lys files are also included.
The model is scaled for 28/32mm gaming. It's fairly large standing approximately 13cm (5 inches) high.... [click here for more] |
FoxCraft |
$8.95
|
Rustic Wooden Chair (STL 3D Printing Model Files)
This stl file features a rustic wooden chair that goes nicely with our rustic wooden table. Perfect for fantasy settings, pirate lairs, isolated cabins, etc. Dimensions are: 14x12x25mm ... [click here for more] |
Fishwife Games |
$0.75
|
Rustic Wood Table (STL 3D Printing Model File)
This rough wood table is a perfect addition to taverns, dungeons, and rougher outland manors. Also good for cabins, rural post apocalypse locations, pirate ships, etc.
The preset dimensions for this file is 46x29x20mm. The table is flipped upside down for easier printing. Feel free to adjust it as needed when you load the file into... [click here for more] |
Fishwife Games |
$1.25
|
Fungal Forest Collection (STL 3D Print File Assortment) Perfect Collection of Strange Overgrown Fungi For Fantasy, Sci-Fi, and Mutant Wasteland Settings!
This collection of assorted 3d print files for toadstools and other fungi are perfect additions to your table top miniature gaming. Designed for 28mm miniatures, some of these mushrooms are taller than the average character while... [click here for more] |
Fishwife Games |
$14.99
|
STL files to 3D print scenery for wargames and roleplaying games on any 3D printer !
You will get a link to download an archive containing STL files that will allow you to print 4 different houses, just load them in the software provided with your 3D printer and print them as many times as you like !
You can mix and match some parts with the designs from the Village... [click here for more] |
Via Ludibunda |
Pay What You Want
|
Carnivorous Plant (3D Printing File- 28mm Gaming Miniatures)
A monstrous take on the venus fly trap is a great drop in encounter for a wide variety of settings, from fantasy forests and mutant wasteland jungles to hostile alien worlds and campy horror movies. This one is scaled large enough to fit a regular sized miniature of a player character in their mouth, which... [click here for more] |
Fishwife Games |
$3.50
|
Alien Flora 1 (3D Printing File- 28mm Gaming Miniatures)
The first of a series of printable alien flora pieces for your sci-fi landscape. This particular piece features four spiky "berries" growing at the ends of the plant's branches.
Default STL File Dimensions: Stinging Fungus: 44.5x44.3x41.4mm Need help or recommended print settings? These are slow but here's... [click here for more] |
Fishwife Games |
$1.50
|
Broken Column (STL 3D Printing Model File)
The broken column is a simple 3d piece that is useful for fantasy miniature gaming decor. This piece is offered as a "pay what you want" to help introduce you to Fishwife Games' new line of gaming miniature STL files.
The preset dimensions for this file is 25x25x28 mm. Feel free to adjust it as needed when you load the file into your favorite... [click here for more] |
Fishwife Games |
Pay What You Want
|
Fortune Teller's Table (STL 3D Printing Model File) The warrior sought answers... answers that the clergy of the temple nor the party's resident wizard could answer. After a brief wander through an incredibly seedy back alley the brave fighter arrived at the door of the city's most notorious fortune teller.
"Come in".... the warrior not even knocked on the door yet.
Opening the... [click here for more] |
Fishwife Games |
$1.75
|
3D PRINT IT SERIES: EVIL TEMPLE ALTAR The heroes fight their way through a wave of dagger wielding cultists as they make their way into the central chamber of the cursed temple. Spread out before the stone idol is an elaborate altar, complete with struggling victim who’s about to be sacrificed…
The Evil Temple Altar STL file provides a nice addition to fantasy, horror, weird fiction, and some... [click here for more] |
HAZARD Studio |
$1.99
|
Alien Flora 2 (3D Printing File- 28mm Gaming Miniatures)
The second of a series of printable alien flora pieces for your sci-fi landscape. This particular piece is a carnivorous lure plant that draws in small critters to its tendril covered feeding maw. Envisioned to be most likely found on hot, humid worlds due to the sail shaped main body of the plant.
Default... [click here for more] |
Fishwife Games |
$1.50
|
DRAGONLOCK Lost Dungeons™ is an all-new 3D printable terrain series that is the culmination of our 18 years of design experience in tabletop gaming. This free sample set allows you try out our link system and see the beauty of our sculpts and how well they will print for you!
All models print supportless and are optimized for FDM 3D printers. This set features our innovative no-solder... [click here for more] |
Fat Dragon Games |
FREE
|
Need a rousing town fight from the black powder age? Will your scurvy pirates surely wind up in a rollicking barfight in Tortuga? Will your game night focus on the covert mission inside the French walled town? Then you need warehouses!
These two-story warehouses feature front and back entrances and fully designed sides to define those dark alleys and strategic choke points so critical for your scenario.... [click here for more] |
Drop the Coin Games |
$4.95
|
Four Eyed Alien Toad (3D Printing File- 28mm Gaming Miniatures)
While monstrous amphibian beasts are staples of high fantasy gaming these weird four eyed toads feel right at home next to space opera/star faring miniatures. Need something really weird for your next mutant wasteland romp? Go with an overgrown toad beast! Regular size and smaller "peeper" variety files... [click here for more] |
Fishwife Games |
$3.00
|
INTRODUCING INSTADUNGEON™ Quick and easy to use single-piece (fully integrated) 3D print STL dungeon tiles compatible with tabletop RPGs
The INSTADUNGEON Starter Set is FREE to download, print and play! It includes six main room and corridor tiles, as well as the smaller tiles sometimes needed to create interconnections—an Entry/Exit tile, a Door... [click here for more] |
Big Dumb Fun Games |
FREE
|
This package includes 10 monsters that are 3D printable and pre-supported. They are all highly detailed and require a resin printer. The monsters' stat blocks and lore can be purchased from the links below. (Not for commercial Use) The D&D 5e compatible supplement can be found here: LINK The Pathfinder Second edition compatible supplement can be found here: LINK
Consuming... [click here for more] |
Random Art Attack |
$35.00
|
Pandimensional Beast (3D Printing File- 28mm Gaming Miniatures)
Sometimes you need something new and crazy and completely unexpected to throw at the players... especially when you're dealing with that smart alec one that owns all the creature manuals (that you're probably going to fireball anyways).... Sometimes you need something with six legs... and yeah, four arms...... [click here for more] |
Fishwife Games |
$3.00
|
Huge Evil Amphitheater and Prison that will work well in all evil strongholds from Underdar, Zhentarim, Black Eagle Barony, Scarlet Brotherhood, to anything Chaos. PDF Diagam here. The structure will split into separate buildings as well. You can mirror the towers and have a merchant-amphitheater and a stand-alone prison. The amphitheater comes with 3 tiers for standing your mini's on, perfect for... [click here for more] |
GameScape3D |
$35.00
|
Stinging Fungus (3D Printing File- 28mm Gaming Miniatures)
This not so nice little stinging fungus is the perfect nasty to shove into that weird cave, fuming forest, bizarre alien world, or mutant wasteland swamp. Standing a bit taller than the average adventuring miniature, the stinging fungus attacks those that get too close with its poisonous whip like tendrils.... [click here for more] |
Fishwife Games |
Pay What You Want
|
Trap Door (STL 3D Printing Model File)
This rough wood trap door is a good addition to dungeon settings, grim manors, weird pirate ships, etc. Just place on the floor of the dungeon and you are good to go. Could also be propped up (and resized) to make a regular door if you like.
The preset dimensions for this file is 34x32x8mm. Feel free to adjust it as needed when you load the... [click here for more] |
Fishwife Games |
$0.65
|
A fully supported STL file of a giant flying laser tower of doom called a Menhir, from WORLDBREAKER RPG. Can be printed with or without dust effects.
Scale: If you print this to be approximately 12 inches tall, it will be to scale with typical 28mm / heroic scale tabletop miniatures.
Sculpted by Marcin Koryszewski for the WORLDBREAKER / Dark Tides of Zaratos Kickstarter. ... [click here for more] |
Ability Score Games |
$1.99
|